Who? For anyone trying to plan something creative to allow various science skills to be developed. This project/lesson has so much scope. At a push this could be done in a lesson and then perhaps for homework but it would work a lot better if a couple of hours of time was given to make a good job of it! The project would sit nicely anywhere within the year or would make a great end of term activity as it is a completely ‘stand alone’ topic. Perhaps you could use this in a STEM week or during Science week? This bundle of resources contains a powerpoint to guide through the project as well as teacher/technician notes, a detailed lesson plan, plus some suspect profiles to work out ‘whodunnit’. I have included a student sheet to allow them to gather and record data and draw conclusions. Students will need to drop ‘blood’ onto the floor/ a surface and gather a set of control diameters of blood splats which are created upon the blood hitting the floor. Students will have to consider how to control various elements of the project/investigation and how to improve accuracy, repeatability, precision etc. They will then need to plot a graph of their results before drawing a final conclusion. I love using this resource! It is fully editable but gives you a resource you can use straight away (you’ll just need to talk to your technicians about making some fake blood…). Enjoy!

Who? For anyone trying to plan something creative to allow various science skills to be developed. This project/lesson has so much scope. At a push this could be done in a lesson and then perhaps for homework but it would work a lot better if a couple of hours of time was given to make a good job of it! Have a look at my other forensic resources which this could be combined with! The project would sit nicely anywhere within the year or would make a great end of term activity as it is a completely ‘stand alone’ topic. Perhaps you could use this in a STEM week or during Science week? This lesson could also be used within a Biology topic which involves ‘food tests’ (sugar and protein). This bundle of resources contains a powerpoint to guide through the project as well as teacher/technician notes, a lesson plan, plus a student worksheet to allow them to gather and record data and draw conclusions. Students will need to test four different urine samples for the presence of sugar and protein (these will need to be prepared - see tech notes) using the benedicts and sodium hydroxide/copper sulfate solutions. Students will have to consider how to control various elements of the project/investigation and how to improve accuracy, repeatability, precision etc. They will then need to record their observations as they go along (this can be done on the student sheet). Great resource! It is fully editable but gives you a resource you can use straight away (you’ll just need to talk to your technicians about making some fake urine…). Enjoy!

Who? For people teaching the new Chemistry/ Combined Science GCSE (2016). Also for those of you requiring a straight forward and simple lesson on defining moles, calculating masses using number of moles and calculating number of moles using masses. This lesson has been made with reference to the new Edexcel Specification but could easily be applied to AQA, OCR etc. What will you get? This is a whole lesson on one powerpoint. A starter task to get students thinking about relative mass (assuming calculation of relative mass has already been taught - if not, check out my shop and find a full lesson there!), Learning objectives, class tasks with answers (all written in the ‘notes’ section of the powerpoint) and a plenary quiz to really make sure they have met the learning objectives. This lesson is ready to go but still offers you flexibility in terms of delivery. Everything you need is here as powerpoint slides which can be printed as ‘worksheets’ if needed. LOTS of questions included for LOTS of practice.

A great knowledge organiser all boiled down to one sheet. My revision methods are quite simple in my lessons - SPEC IT, REVISE IT, TEST IT. If students know EXACTLY WHAT they need to revise (using the specification checklist) it makes for smarter revision. If they can TEST THEMSELVES to measure their understanding - even better! This resource is a comprehensive but concise knowledge organiser covering the tough put essential Chemistry Calculations plus some great examples of model calculation answers. This knowledge organiser has been made against the Edexcel specification but would easily be applicable to others. Each revision point has been written in accordance with the specification section to help students translate the specification points. The Knowledge Organiser is applicable to students sitting standard or higher tier papers. Calculations included are… calculating concentrations (in g/dm3 and mol/dm3) calculating unknown concentrations using titration data gas volume calculations starting with mass of a reactant gas molar volume ratios

A lesson for early on in the Organic Chemistry topic of A-Level Chemistry, introducing the idea of functional groups and homologous series. Students will carry out an independent task to find out the functional groups from a given list plus the general formula and homologous series they belong to. I have also included an exam question to assess understanding at the end of the lesson or to set as a homework for lesson follow up (answer included).

Who? For those teaching the new Chemistry/ Combined Science GCSE (2016). Also for those of you requiring a straightforward and simple lesson on calculating relative formula mass and discovering how to deduce empirical formula using the molecular formula of a compound. What? This is a whole lesson on one powerpoint. A starter mass quiz, Learning objectives, worked examples with answers, class tasks with answers (differentiated up to challenge your more able), exam questions with markschemes to share with your group. This lesson is ready to go but still offers you flexibility to offer group work or peer teaching style tasks if you wish.

My revision methods are quite simple in my lessons - SPEC IT, REVISE IT, TEST IT. If students know EXACTLY WHAT they need to revise (using the specification checklist) it makes for smarter revision. If they can TEST THEMSELVES to measure their understanding - even better! This resource is a comprehensive but concise knowledge organiser covering Atomic Structure (including isotopes and calculating relative atomic mass). This knowledge organiser has been made against the Edexcel specification. Each revision point has been marked with the specification section (in green) and is applicable to students sitting standard or higher tier papers. Students also get to see some model exam questions so they are able to see how the specification points may be presented in exam form.

This super resource uses modelling of how to calculate Kc and deduce units for Kc. The whole lesson is based around typical exam questions which will be worth approximately 5 marks. This video has links directly to my YouTube channel to allow you to play students a model Kc calculation with a clear step-by-step method. Using the video models will free you up as teacher to talk through each step and allow time for questioning without having to worry about working through the examples - they are already done for you! The final model is a an exam question from a previous past paper. The markscheme has been included in the presentation to allow you to share this with your students. Kc calculations are tricky to teach but this really takes out the hard work! The whole lesson is within the powerpoint and teaching suggestions are written into the notes section of each slide.

This circus of activities would easily be your main task within a lesson. The focus is on dissolving/soluble vs insoluble/ separating mixtures and solutions. I have produced a tech list (attached) so this should be as straightforward as possible! Very simple practical kit which should not cause any issues. Students could be put into groups/pairs and complete this circus with little input from you. The main worksheet/booklet has simple but clear instructions of what to do at each station. The only thing you will have to organise is how to lay out your room! Aimed at KS3 but could easily be used with low ability KS4.

Who? For you lucky people teaching the new Chemistry/ Combined Science GCSE (2016). Also for those of you requiring a straightforward lesson on ISOTOPES plus how to use them to calculate RELATIVE MASS of an element. This lesson has been made with reference to the new Edexcel Spec but would easily be relevant in AQA and OCR. What? This is a whole lesson on one powerpoint. A starter/ diagnostic to see what your group know about the atom already and how to calculate numbers and types of sub-atomic particle. Learning objectives have been written with direct reference to the specification (because that’s what they need to know!), worked examples with answers written either in the ‘notes section’ of the powerpoint or on the slides themselves, class tasks with answers (all written in the ‘notes’ section of the powerpoint or on slides themselves). This lesson is ready to go but still offers you flexibility to offer group work or peer teaching style tasks if you wish. Everything you need is here as powerpoint slides which can easily be printed as ‘worksheets’ if needed. Print the powerpoint including the notes and you’ll be ready to go!

Exams or Mocks just about to happen? Or maybe you are just tired of going over the same old Chemistry facts, time after time after time… Or perhaps you are being uber organised and sorting a place for your Chemistry students to record the ‘recall’ knowledge as they learn about it. Whatever the reason, this is a very handy resource to have… This worksheet provides an excellent revision resource (made last week at the request of my Year 11s!) or would happily provide an ongoing resource which could be added to or built upon as the course progresses (this is how I’ll be using it next year…). The worksheet contains a template summary of all those Chemistry facts (recall) that need to be learnt before the exam. ion charges gas tests electrolysis product rules solubility rules … and loads more. I’ve also saved you the time of working out answers and created an answer sheet to boot!

Who? For anyone trying to plan something creative to allow various science skills to be developed. This project/lesson has so much scope. This could be delivered as a stand alone lesson or coupled with my other forensic project lessons to create an extended investigation. The project would sit nicely anywhere within the year or would make a great end of term activity as it is a completely ‘stand alone’ topic. Perhaps you could use this in a STEM week or during Science week? This bundle of resources contains a powerpoint to guide through the project as well as teacher/technician notes, a detailed lesson plan, plus some suspect profiles to work out ‘whodunnit’. I have included a student sheet to allow them to gather and record observations and draw conclusions. Students will need to set up a microscope to observe some pre-prepared slides showing hair and fibre samples and draw their observations. This resource is fully editable but can be used straight away (you’ll just need to talk to your technicians about making some hair and fibre slides using the suspect profiles for guidance…). Enjoy!

Who? For those teaching the new Chemistry/ Combined Science GCSE (2016). Also for those of you requiring a clear and simple worksheet to allow students to practice how to calculate masses and number of moles. What? This worksheet requires students to calculate the mass of 1 mole of a substance plus to calculate the number of moles in a substance of given mass. This sheet is scaffolded to support the development of the ‘moles’ idea and includes the brilliant moles equation triangle to support later/more challenging questions. Students will need a periodic table. You just need to print the sheet! I’ve even included answers for all questions so you really do not have to do anything!

A great knowledge organiser all boiled down to one sheet. If students know EXACTLY WHAT they need to revise (using the specification checklist) it makes for smarter revision. If they can TEST THEMSELVES to measure their understanding - even better! This resource is a comprehensive but concise knowledge organiser covering… Electrolysis key definitions Predicting the products of an electrolysis experiment (a great flow diagram to make this easier for students!) Half equations Purifying Copper oxidation and reduction

An excellent activity to allow your A-Level Chemists to apply their knowledge of Mass Spectrometry and Infrared Spectroscopy to identify some Organic unknowns. This activity will need to be taught after students have had an introduction to the main homologous series’ in their first year of A-Level Chemistry. The task involves students studying mass and infrared spectra to identify the unknown chemicals. Some qualitative clues have also been given to encourage students to realise that analysis often involves multiple sets of data. All answers are included. I gave this as a paired task but would work well in groups, individually, as a homework or an assessment.

A cut and stick or match 'em up type activity to assess recall of simple chemical reactions content. common gas tests reactant and products the fire triangle word equations

A great visual activity which would sit nicely anywhere in the lesson or as a homework. Students need to match terms to definitions but also to a diagram which represents the word or process. Really useful to support students in their understanding. This activity could be done as a cut and stick or, if you don’t like the faff of glue and scissors (like me!) then there are plenty of other ways for students to match. A good activity to build up their glossary of words in a topic where there are many new terms to learn! Aimed at KS3 but could support lower ability KS4.

A 53 (!) slide powerpoint delivered as a Big Quiz covering TOPIC 2 content of the Edexcel Specification (though this can easily be used against other specifications). Topic 2 is split into sub-topics and so there are 2 rounds in total. Round 1 - States of Matter Round 2 - Separation of mixtures techniques Each question has been written using the specification and answers generated against mark schemes from exam style questions. Following each round of questions come a round of answers so students can peer mark or you can. Though one massive quiz, this resource could easily be used as a whole lesson, starters, to formatively assess after revision sessions - whatever you like! I’m using them in my revision sessions and Chemistry booster sessions! Keep your eyes peeled for TOPIC 3 next…

My revision methods are quite simple in my lessons - SPEC IT, REVISE IT, TEST IT. If students know EXACTLY WHAT they need to revise (using the specification checklist) it makes for smarter revision. If they can TEST THEMSELVES to measure their understanding - even better! This resource is a comprehensive but concise knowledge organiser covering Periodic Table and Mendeleev (including Electronic Configuration). This knowledge organiser has been made against the Edexcel specification but would easily be applicable to others. Each revision point has been marked with the specification section (in green) to help students translate the specification points. The Knowledge Organiser is applicable to students sitting standard or higher tier papers (studying Separate or Combined Science routes). Each revision point has been written as a typical ‘stock exam answer’.