This lesson uses 17 multiple-choice questions to challenge students to apply their understanding to the calculation sections of the course. The PowerPoint and accompanying resources are designed to act as revision during the final weeks leading up to the AQA GCSE Combined chemistry exams and the following topics are covered: Atoms and ions Isotopes Concentration of solutions Mole calculations using Avogadro’s constant Calculating relative formula mass Mole calculations using mass and relative formula mass Calculating masses in reactions Calculating energy changes in reactions Calculating the mean rate of reaction All 17 questions have answers embedded into the PowerPoint along with explanations and are followed by additional tasks to further check understanding if it was initially limited.

A fun and engaging lesson presentation (74 slides) and accompanying differentiated worksheets that uses exam questions with displayed mark schemes and competitions to enable students to assess their understanding of Module C4 (Predicting and identifying reactions and products). The following topics within the combined Science specification are covered by the tasks: C4.1 Predicting chemical reactions Group 1 - the alkali metals Group 7 - the halogens Halogen displacement reactions Group 0 - the noble gases Reactivity of elements C4.2 Identifying the products of chemical reactions Detecting gases Students will be able to use the understanding checks to see which areas of the specification need more attention

An informative lesson presentation (37 slides) and accompanying worksheets that guides students through the different methods that can be used to rearrange formulae as they will be required to do in the Science exams. The lessons shows them how to use traditional Maths methods involving inverse operations and also equation triangles to come to the same result. These are constantly linked to actual examples and questions to show them how this has to be applied. There are regular progress checks, with explained answers, so that students can assess their understanding.

A fully-resourced lesson that teaches students how to calculate the concentration of a solution in the units grams per decimetres cubed and mol per decimetre cubed. The lesson includes a concise but detailed lesson presentation (20 slides) and a set of differentiated questions. The lesson begins by introducing students to volumes in decimetres cubed and time is taken to ensure that students are able to convert to this measurement. Moving forwards, students are guided through how to calculate the concentration in both units through the use of worked examples. Differentiated questions are available so that all abilities can access the work. This lesson has been written for GCSE students (14 - 16 year olds in the UK) but could be used with students who are beginning their A level Chemistry studies

An engaging lesson presentation (54 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within the Chemistry unit C7 (Organic chemistry) of the AQA GCSE Combined Science specification (specification point C5.7) The topics that are tested within the lesson include: Crude oil, hydrocarbons and alkanes Fractional distillation and petrochemicals Properties of hydrocarbons Cracking and alkenes Students will be engaged through the numerous activities including quiz rounds like “What FRACTION of this is correct” and “Are you on FORM” whilst crucially being able to recognise those areas which need further attention

A fully-resourced lesson that looks at the reaction of an acid with a metal or a metal carbonate and guides students through writing word and symbol equations to represent these reactions. This lesson includes a lesson presentation (39 slides) and differentiated worksheets. The lesson begins by challenging the students to spot a pattern when naming the salts that are produced from these reactions. Students are shown how the second word of the salt’s name depends upon the particular acid involved in the reaction and are given opportunities to watch this in worked examples before applying their knowledge to a question. Students will also meet the general formula for the reaction of an acid with a metal carbonate. Moving forwards, a step by step guide is used to show the students how to write fully balanced symbol equations. Time is taken to specifically show them how to write accurate chemical formulae, including those which involve a bracket as is common in this topic. The final task challenges the students to bring all of this information together to write word and symbol equations for three reactions. This worksheet is differentiated two ways so students who require some assistance can still access the work. This lesson has been written for GCSE students (14 - 16 year olds in the UK)

A fully resourced lesson which includes an informative lesson presentation (34 slides) and differentiated worksheets that show students how to convert between units so they are confident to carry out these conversions when required in Science questions. The conversions which are regularly seen at GCSE are covered as well as some more obscure ones which students have to be aware of. A number of quiz competitions are used throughout the lesson to maintain motivation and to allow the students to check their progress in an engaging way This lesson has been designed for GCSE students but is suitable for KS3

A lesson presentation (44 slides), accompanied by a question worksheet, which together looks at the reactants and products of a neutralisation reaction and challenges students to represent these reactions with equations. The lesson begins with a bit of fun as students are asked to read through a scene from the US comedy show and spot that a neutralisation reaction is hidden under the jokes. Students will use their KS3 knowledge to recall that these reactions involve acids and alkalis and moving forwards they will be introduced to a new term, base. The rest of the lesson focuses on writing word and balanced symbol equations for different neutralisation reactions. A step by step guide is used to demonstrate how to work out the name of the salt as well as writing accurate chemical formulae. Finally, students are challenged to apply their new-found knowledge and complete equations for 4 neutralisation reactions and they can assess against the displayed mark schemes. Progress checks have been written into the lesson at regular intervals so that this self-assessment is constant and any misconceptions are quickly addressed. This lesson has been written for GCSE students but could be used with younger students who are looking to extend their knowledge

An engaging lesson presentation (54 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit C8 (Chemical analysis) of the AQA GCSE Combined Science specification (specification point C5.8) The topics that are tested within the lesson include: Pure substances Chromatography Identification of common gases Students will be engaged through the numerous activities including quiz rounds like “Take the CHROMATOGRAPHY hotseat” whilst crucially being able to recognise those areas which need further attention

An engaging lesson presentation (70 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within the Chemistry unit C1 (Atomic structure and the Periodic Table) of the AQA GCSE Combined Science specification (specification unit C5.1). The topics that are tested within the lesson include: Mixtures Development of the model of the atom The subatomic particles Electronic structure The periodic table Metals and non-metals Group 0 Group 1 Group 7 Students will be engaged through the numerous activities including quiz rounds like “UNLOCK the safe" whilst crucially being able to recognise those areas which need further attention

A fully resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit C9 (Chemistry of the atmosphere) of the AQA GCSE Combined Science specification (specification point C5.9). The topics that are tested within the lesson include: The proportion of different gases in the atmosphere The Earth’s early atmosphere Greenhouse gases Atmospheric pollutants Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require further attention

An engaging lesson which looks at the properties of the Transition metals of the Periodic Table and ultimately compares these properties against other metals, such as the Alkali metals. Through the use of a range of motivating tasks and quiz competitions, students will learn that the transition metals form coloured compounds, have a number of ion charges, act as catalysts and are harder, stronger but less reactive than group 1. This lesson has been written for GCSE students (14 - 16 year olds) but is suitable for younger students who are looking at the patterns and trends in the Periodic Table

A fully-resourced lesson which explores how ions are formed from atoms. The lesson includes an engaging lesson presentation (33 slides) and an associated worksheet to be used during an understanding check. The first part of the lesson focuses on atoms and specifically on getting students to recall that they contains the same number of protons and electrons and this is why they have no charge. By ensuring that they are confident with this fact, they will be able to understand why ions have a charge. Students will learn that ions have full outer shells of electrons and this change in the number of this sub-atomic particle leads to the charge. They are shown examples with aluminium and oxygen and then challenged to apply this new-found knowledge to a task where they have to explain how group 1, 2, 5 and 7 atoms become ions. The final part of the lesson looks at how ion knowledge can be assessed in a question as they have to recognise the electron configuration of one and describe how many sub-atomic particles are found in different examples. There are regular progress checks throughout the lesson to allow the students to check on their understanding. This lesson has been written for GCSE students but could be used with higher ability KS3 students who are looking to extend their knowledge past basic atomic structure

This lesson has been written with the aim of engaging students in the topic of simple and giant covalent molecules, as this is a topic which is often considered to be boring or is brushed over. A variety of tasks have been used to maintain the interest whilst ensuring that they key details and Science are known and understood. The lesson begins with a quick recap task where students have to recognise a covalent bond from a description and fill the missing part. Moving forwards, they are introduced to the fact that covalent molecules can be simple or giant. They are then presented with a table showing some properties of covalent molecules and having to group them as simple or giant in the short space of time that the table remains displayed on the board. This task challenges their observational skills, something which will again be tested later in the lesson as they study the structure of graphite and diamond. Time is taken to ensure that key details such as the strong covalent bonds in both sets of molecules is understood and that it is the weak intermolecular forces which are actually responsible for the low melting and boiling points. The last part of the lesson introduces diamond and graphite as allotropes of carbon and students will briefly learn why one of these conducts electricity whilst the other doesn’t. If you want a lesson about these allotropes in more detail, then please look for “Diamond and Graphite”. Progress checks have been written into the lesson at regular intervals so that students are constantly assessing their understanding and so misconceptions are quickly identified. This lesson has been written for GCSE students (14 - 16 years of age in the UK)

A resourced lesson which guides students through the method of writing word equations for a range of different chemical reactions. The lesson includes an engaging and informative lesson presentation (33 slides) and an associated worksheet containing questions. The lesson begins by reminding students of the form which word equations take, with the reactants chemically changing into the products. Moving forwards, time is taken to show students how to work out the name of a compound that contains either 2 or 3 elements. This moves nicely into the reaction of acids and how to name the salt that is produced. Students are shown the general formula for the reactions of acids with a metal, a metal carbonate and a metal oxide or hydroxide so that they can form word equations for each of these reactions in the progress check task. The final section of the lesson introduces reversible reactions to the students and shows them the symbol that is used in these word equations to replace the arrow. There are regular progress checks throughout the lesson to allow the students to check on their understanding and thorough explanations of the required answers. This lesson has been written for GCSE students but is perfectly suitable for KS3 students too.

A detailed lesson which includes a lesson presentation (52 slides) and an associated worksheet that goes through the basis of electrolysis and then focuses on the examples when the electrolyte is a molten salt. The lesson has been designed to move in small steps with regular progress checks so that key details are fully understood. It begins by ensuring that students understand which ions are attracted to which electrode. The lesson then looks at how electrons are either gained or lost at the electrodes and this is related to redox reactions as well. Helpful hints and exam question tips are given throughout to aid students with this commonly assessed topic. This lesson has been designed for GCSE students (14 - 16 year olds in the UK) but could be used with both older and younger students

An engaging, practical-based lesson presentation (34 slides), accompanied by an assistance sheet, which together look at how the results of displacement reactions can be used to order the metals into the reactivity series. The lesson begins by introducing a displacement reaction and ensuring that students understand the meaning of this term and how it relates to the topic of the lesson. Students will carry out a series of 12 displacement reactions, involving 4 different metals and will then be challenged to interpret the results to place the metals into their allocated positions in the series. Moving forwards, the students are given the results of more reactions, some which occurred and others which didn’t so they can place the remaining metals into the reactivity series. Time is also taken to understand how the position of hydrogen in the series can be used to predict the results of reactions between metals and acids. This lesson has been written for GCSE students but could be used with higher ability KS3 students

A fully-resourced lesson, which includes a lesson presentation (49 slides) and associated worksheets and guides students through the topic of extracting metals. The main focus of the lesson is the extracting of the metals (from their oxides) that fall below carbon in the reactivity series. Students will see how the metal oxides are reduced in order to form the required metal. Some time is taken to briefly look at the extraction of aluminium from aluminium oxide but if a lesson on the extraction of a particular metal is sought, then please look at my additional resources which cover iron and aluminium in greater detail. This lesson has been designed for GCSE students (14 - 16 year olds in the UK)

An engaging lesson presentation (37 slides) which gets students to test their practical skills by carrying out the four identification tests for oxygen, hydrogen, carbon dioxide and chlorine. The lesson begins by using a competition called “Guess the gas” where students have to used clues to identify the four colourless gases which will be used in the lesson. Moving forwards, students will meet the pieces of equipment that will be used in these tests. Practical instructions for each of the tests are included in the lesson so that students can produce the gas and then carry out the test. There are regular progress checks throughout the lesson so that students can assess their understanding. This lesson is suitable for both KS3 and GCSE students

A fully-resourced lesson that uses a range of tasks, understanding checks and quick competitions to guide students through calculating the relative formula mass for substances with a range of chemical formulae. The relative formula mass is required in a lot of calculations, such as those that involve moles, so it is an important skill to get right. Worked examples are used throughout the lesson to visualise the metho for the students. Initially, students will learn how to calculate the mass from simple formulae before helpful hints are provided for harder formulae such as those that contain a bracket. Students are given the chance to apply their knowledge by proving that mass is conserved in a reaction. This lesson has been written for GCSE students but could be used with higher ability KS3 students in lessons that are looking to push knowledge forward