This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick differentiated tasks and quiz competitions to allow students to assess their knowledge of the topic of moles and related topics as covered in the GCSE Chemistry and GCSE Combined Science courses. An understanding of moles and their associated calculations is critical for the success of a student in these two courses. The following topics are covered in this revision lesson: Avogadro’s law and constant Mole calculations involving Avogadro’s constant Mole calculations involving the formula, moles = mass x molar mass Mole calculations involving the constant and the formula Moles in balanced symbol equations and identifying molar ratios of reactants or reactants to products Calculating masses in reactions Gas calculations (molar volume) Concentration of solutions (in mol per decimetre cubed) Students will be engaged through the range of activities which includes quiz competitions such as “Fill the VOID” where students have to complete some equations which have pieces missing and also “In the BALANCE” where students have to balance equations in order to work out the number of moles on each side of the reaction. This lesson can be used at any time during the year as a revision material, in the lead up to mocks or as a final revision lesson before the GCSE terminal exams.

An engaging lesson presentation (33 slides) which walks students through the main steps in the extraction of iron from its ore. The lesson begins by challenging the students to recall the reactivity series of metals and specifically the position of iron in relation to carbon so they recognise that it can be extracted by reduction with carbon. Key skills from other Chemistry topics are tested during the lesson such as writing chemical formulae and redox reactions. The rest of the lesson involves a step-by-step guide where students are given a passage and a symbol equation with something missing which they have to complete. This task ensures that students recognise the products, formulae and state symbols at each stage. A number of quiz competitions are used during the lesson to maintain engagement and progress checks have been written into the lesson at regular intervals so that students can assess their understanding. This lesson has been written for GCSE students and fits in nicely with other resources that are uploaded (extracting metals and extracting aluminium).

A fully resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit C9 (Chemistry of the atmosphere) of the AQA GCSE Combined Science specification (specification point C5.9). The topics that are tested within the lesson include: The proportion of different gases in the atmosphere The Earth’s early atmosphere Greenhouse gases Atmospheric pollutants Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require further attention

A fully-resourced lesson which explores how the composition of different alloys is related to their properties and their uses. The lesson includes an engaging and informative lesson presentation (38 slides) and an associated differentiated worksheet. The lesson begins by challenging the students to use their Chemistry knowledge of numbers to come up with the letters of the word alloy. Students are introduced to the definition of this key term and then use a wordsearch to find both the names of the alloys but also the metals that are found in these mixtures. The main aim of this lesson is to get students to understand why alloys are chosen for jobs rather than pure metals and there is a focus on atoms and their arrangement. Students are challenged to use the example of copper and brass to complete a summary passage which is differentiated so that those who need more assistance are still able to access the work. The remainder of the lesson focuses on steel and solder, again exploring how their different features are related to how they are used in modern day life. Progress checks have been written into the lesson at regular intervals to allow the students to check their understanding and a range of quick quiz competitions will aid engagement. This lesson has been designed for GCSE students but could be used with KS3 students who are looking at mixtures within the atoms and elements topic.

A fully resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within TOPIC 9 (Chemistry of the atmosphere) of the AQA GCSE Chemistry specification (specification point C4.9). The topics that are tested within the lesson include: The proportion of different gases in the atmosphere The Earth’s early atmosphere Greenhouse gases Atmospheric pollutants Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require further attention

A fully resourced lesson which includes an informative lesson presentation (34 slides) and differentiated worksheets that show students how to convert between units so they are confident to carry out these conversions when required in Science questions. The conversions which are regularly seen at GCSE are covered as well as some more obscure ones which students have to be aware of. A number of quiz competitions are used throughout the lesson to maintain motivation and to allow the students to check their progress in an engaging way This lesson has been designed for GCSE students but is suitable for KS3

An engaging lesson presentation (64 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit C2 (Elements, compounds and mixtures) of the OCR Gateway A GCSE Chemistry specification. The topics that are tested within the lesson include: Relative formula mass Empirical formula Pure and impure substances Separation methods Electronic structures Forming ions Ionic compounds Simple molecules Giant covalent substances Carbon Nanoparticles Students will be engaged through the numerous activities including quiz rounds like “SEPARATE the fact from the fiction” and “Higher or Lower” whilst crucially being able to recognise those areas which need further attention

A fully-resourced lesson which includes a lesson presentation (24 slides) and a worksheet which is differentiated so that students can judge their understanding of the topic of writing half equations for electrolysis and access the work accordingly. The lesson uses worked examples and helpful hints to show the students how to write half equations at both the cathode and anode. Time is taken to remind students about the rules at the electrodes when the electrolyte is in solution so that they can work out the products before writing the equations. This lesson has been designed for GCSE students (14 - 16 years old in the UK) but could be used with older students.

This revision lesson has been designed to challenge the students on their use of a range of mathematical skills that could be assessed on the AQA GCSE Combined Science papers. The mathematical element of the AQA GCSE Combined Science course has increased significantly since the specification change and therefore success in those questions which involve the use of maths can prove to be the difference between one grade and another or possibly even more. The engaging PowerPoint and accompanying resources contain a wide range of activities that include exam-style questions with displayed mark schemes and explanations so that students can assess their progress. Other activities include differentiated tasks, class discussion points and quick quiz competitions such as “YOU DO THE MATH” and “FILL THE VOID”. The following mathematical skills (in a scientific context) are covered in this lesson: The use of Avogadro’s constant Rearranging the formula of an equation Calculating the amount in moles using mass and relative formula mass Calculating the relative formula mass for formulae with brackets Using the Periodic Table to calculate the number of sub-atomic particles in atoms Changes to electrons in ions Balancing chemical symbol equations Converting between units Calculating concentration in grams per dm cubed and volumes of solutions Calculating size using the magnification equation Using the mean to estimate the population of a sessile species Calculating percentages to prove the importance of biodiversity Calculating percentage change Calculating the acceleration from a velocity-time graph Recalling and applying the Physics equations Understanding prefixes that determine size Leaving answers to significant figures and using standard form Helpful hints and step-by-step guides are used throughout the lesson to support the students and some of the worksheets are differentiated two ways to provide extra assistance. Due to the detail of this lesson, it is estimated that it will take in excess of 3 hours of GCSE teaching time to cover the tasks and for this reason it can be used over a number of lessons as well as during different times of the year for revision.

This lesson uses 17 multiple-choice questions to challenge students to apply their understanding to the calculation sections of the course. The PowerPoint and accompanying resources are designed to act as revision during the final weeks leading up to the AQA GCSE Combined chemistry exams and the following topics are covered: Atoms and ions Isotopes Concentration of solutions Mole calculations using Avogadro’s constant Calculating relative formula mass Mole calculations using mass and relative formula mass Calculating masses in reactions Calculating energy changes in reactions Calculating the mean rate of reaction All 17 questions have answers embedded into the PowerPoint along with explanations and are followed by additional tasks to further check understanding if it was initially limited.

A fully-resourced lesson which looks at the meaning of the rate of reaction and guides students through calculating both the mean and instantaneous rate of reaction. The lesson includes a concise lesson presentation (19 slides) and a question worksheet which is differentiated two ways. The lesson begins by challenging the students to suggest the missing factor in the rate of reaction equation so they can learn that either the mass of a reactant or a mass of a product could be used. Links are made to practical skills as students will understand that if a product is in the gaseous form, the volume produced within a set time will enable the rate to be calculated. Worked examples are used to show the students how to calculate the mean rate of reaction and then the instantaneous using a tangent. The rest of the lesson involves collecting data from an experiment to calculate the rate of reaction. The questions associated with the practical have been differentiated so students who need assistance can still access the learning. This lesson has been written for GCSE students

An engaging lesson presentation (39 slides) with associated differentiated worksheets that looks at they key differences between pure and impure substances and briefly explores how a mixture like an alloy can still be very useful. The lesson begins by challenging the students to recognise 4 diagrams of pure substances from a selection of 5. This will lead students to the definition of pure (in Science) which is likely to be different to what they have encountered in everyday language. The next task gets the students to draw a graph showing the melting and boiling points of pure water. This will enable them to compare the melting point against that of an impure substance and therefore recognise that this difference can be used as point to decide on purity. An example of gritting is used to explain how this change in melting point can be utilised and then the students are challenged to apply this new-found knowledge to the situation of adding salt to boiling water when making pasta. The remainder of the lesson focuses on some famous mixtures. Beginning with air, students will be able to visualise how this mixture is made of a number of gases, each with different boiling points which allows them to be separated by fractional distillation. Alloys are briefly explored so that students know why these mixtures are used for certain functions over pure metals and the summary passage for this task has been differentiated two ways so that all can access the work. Progress checks have been written into the lesson at regular intervals so that students can check their understanding and a range of quick quiz competitions are used to maintain engagement whilst introducing new terms in a fun manner. If you want to look into alloys in greater detail, then this lesson could be combined with the one named “alloys” which is also uploaded.

This is a detailed and engaging lesson presentation (59 slides) that combines exam questions and progress checks along with quiz competition rounds to enable students to assess their understanding of the specification content within topics C1 - 3 of the OCR GCSE Combined Science Gateway A 9 - 1 as can be assessed in Paper 3. All of the exam questions and progress checks have displayed answers as well as sections where content is recapped so that students can understand how an answer was obtained. The revision rounds in the competition include “The need to BALANCE”, “Number crazy” and “React to the REACTION”. This lesson has been designed for GCSE students.

This REVISION resource has been designed to motivate and engage students whilst they are challenged on their knowledge of the content in topics C1-C5 of the AQA GCSE Chemistry specification which can be assessed on PAPER 1. This is fully-resourced and contains a detailed PowerPoint (208 slides) and accompanying worksheets, some of which have been differentiated. The resource was written with the aim of covering as many of the sub-topics in C1-C5 as possible, but the following ones have been given a particular focus: The chemical properties of the Group 1, 7 and 0 elements The structure of atoms and ions The properties of ionic compounds Drawing dot and cross diagrams to represent ionic compounds Extracting metals using carbon REDOX reactions Electrolysis of molten salts and solutions Neutralisation reactions Writing balanced chemical symbol equations Simple and giant covalent structures Diamond and graphite Calculating the relative formula mass Moles and Avogadro’s constant Calculating the mass in reactions Molar volume (Gas calculations) Concentration of solutions The organisation of the Periodic Table Due to the extensiveness of this resource, it is likely to be used over the course of a number of lessons with a particular class and this allows the teacher to focus in on any sub-topics which are identified as needing more time.

This fully-resourced lesson with differentiated resources has been written to prepare students for the range of mathematical-based questions they may face on the two Edexcel GCSE Chemistry papers. The lesson has been designed to contain a wide range of activities which includes 8 quiz competition rounds spread across the duration of the lesson to maintain engagement whilst the students assess their understanding. The mathematical skills covered in this lesson include: Calculating the number of sub-atomic particles in atoms and ions Writing chemical formulae for ionic compounds Identifying isotopes Calculating the relative atomic mass using isotope mass and abundance Using Avogadro’s constant to calculate the number of particles Calculating the relative formula mass Calculating amount in moles using the mass and the relative formula mass Balancing chemical symbol equations Calculating reacting masses Gas calculations using molar volume Calculating concentration of solutions Titration calculations Deducing the empirical formula Calculating energy changes in reactions Most of the resources have been differentiated two ways to allow students of differing abilities to access the work whilst still being challenged. In addition, step by step guides are used to demonstrate how to carry out some of the more difficult calculations such as the harder mole calculations and calculating masses in reactions This lesson could be used with higher ability students on the Edexcel GCSE Combined Science course by taking out the sections which are not applicable.

A fully-resourced lesson that includes a lesson presentation (20 slides) and a differentiated worksheet. The lesson uses a step-by-step method to guide students through the process of writing net ionic equations. Students will learn the meaning of a spectator ion and be able to identify them within an equation so that they can be removed when writing the final net ionic equation. The lesson focuses on writing these equations for neutralisation and precipitation reactions, with the former being a very common question in assessments. This lesson has been written for GCSE students (14 - 16 year olds)

A concise lesson presentation (20 slides) that looks at how the collision theory is related to the rate of reaction. This is a short lesson that would be taught at the beginning of the topic that looks at the rate of reaction and the factors that affect the rate. Students are challenged with a quick competition that gets them to recognise keywords which are involved in the collision theory. Some time is then taken to focus on "activation energy" and how this is shown on a reaction profile. Finally, students will use their keywords to form a clear definition for the collision theory which includes its link to the rate of reaction so this can be used in the upcoming lessons This lesson has ultimately been designed for GCSE students but can be used with all age groups as an introduction to the topic

A concise lesson presentation (19 slides) which looks at meaning of the key term, polymers, and briefly explores addition and condensation polymers. The lesson begins with a fun exercise to enable students to come up with the word polymers so that they can be introduced to the definition and then relate this to another term, monomers. A quiz competition is used to introduce addition and condensation polymers. Students are shown the displayed formulae and names of a few addition polymers and then challenged to use this to name and draw some others. They will then learn how DNA is an example of a condensation polymer. A set homework is included in the lesson which gets students to research thermosetting and thermosoftening polymers