This detailed and engaging lesson describes the different ecological techniques used to assess the abundance and distribution of organisms in a habitat. In line with point 10.1 (iv) of the Edexcel A-level biology B specification, the following techniques are included in the PowerPoint and accompanying resources: quadrats (of differing areas) transects ACFOR scale percentage cover The mathematical element of the course is challenged in the early stages of this lesson, when the students have to estimate the populations of different plant species using data obtained with a quadrat. Understanding checks are used throughout the lesson to allow the students to assess their progress against the current topic and they are encouraged to consider the advantages and disadvantages of each technique.

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quiz tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Properties of waves, including light and sound) of the Cambridge IGCSE Physics (0625) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: Give the meaning of the terms speed, frequency, wavelength and amplitude Distinguish between longitudinal and transverse waves and be able to give suitable examples of each Recall and use the equation velocity = frequency x wavelength Describe how waves can undergo reflection, refraction and diffraction Describe how wavelength affects diffraction Describe an experimental demonstration of the refraction of light Be able to define refractive index and recall the equation to calculate Give the meaning of the critical angle and recall the equation to calculate Describe total internal reflection and be able to explain the use of optical fibres in medicine The electromagnetic spectrum Describe the longitudinal nature of sound waves State the approximate range of audible frequencies for a healthy human Show an understanding of the term ultrasound Describe an experiment to determine the speed of sound in air The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Should you WAVE goodbye” where they have to decide if a passage is 100% factually correct or not whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams.

This fully-resourced REVISION lesson has been designed to enable the students to challenge their knowledge of the content of topic 16 (Inherited change) of the CIE A-level Biology specification. The engaging PowerPoint and accompanying differentiated worksheets will motivate the students whilst they assess their understanding of the content and identify any areas which may require further attention. The wide range of activities have been written to cover as much of the topic as possible but the following specification points have been given particular focus: Homologous pairs of chromosomes The meanings of haploid and diploid The behaviour of chromosomes in meiosis Crossing over and random assortment as causes of genetic variation The use of key genetic terminology The use of genetic diagrams to solve problems including autosomal and sex-linkage, dihybrid inheritance and gene interactions The use of the chi-squared test Gene mutations Genetic control of protein production in prokaryotes Gibberellins and how they cause the breakdown of DELLA proteins Due to the extensiveness of this resource, it is likely that it will take a number of lessons to go through all of the activities

This fully-resourced REVISION LESSON has been designed to provide the students with numerous opportunities to assess their understanding of the content of topic 12 (Energy and respiration) of the CIE International A-level Biology specification. The importance of this metabolic reaction is obvious and this is reflected in the volume of questions in the terminal exams which require an in depth knowledge of the stages of both aerobic and anaerobic respiration. The lesson contains a wide range of activities that cover the following points of the specification: Glycolysis as a stage of aerobic and anaerobic respiration The use and production of ATP through respiration Anaerobic respiration in mammalian muscle tissue The stages of aerobic respiration that occur in the mitochondrial matrix Oxidative phosphorylation The use of respirometers Calculating the respiratory quotient value for different substrates Revision lessons which cover the other topics of the specification are also uploaded and tie in well with this lesson.

This revision lesson has been designed to challenge the students on their use of a range of mathematical skills that could be assessed on the AQA GCSE Combined Science papers. The mathematical element of the AQA GCSE Combined Science course has increased significantly since the specification change and therefore success in those questions which involve the use of maths can prove to be the difference between one grade and another or possibly even more. The engaging PowerPoint and accompanying resources contain a wide range of activities that include exam-style questions with displayed mark schemes and explanations so that students can assess their progress. Other activities include differentiated tasks, class discussion points and quick quiz competitions such as “YOU DO THE MATH” and “FILL THE VOID”. The following mathematical skills (in a scientific context) are covered in this lesson: The use of Avogadro’s constant Rearranging the formula of an equation Calculating the amount in moles using mass and relative formula mass Calculating the relative formula mass for formulae with brackets Using the Periodic Table to calculate the number of sub-atomic particles in atoms Changes to electrons in ions Balancing chemical symbol equations Converting between units Calculating concentration in grams per dm cubed and volumes of solutions Calculating size using the magnification equation Using the mean to estimate the population of a sessile species Calculating percentages to prove the importance of biodiversity Calculating percentage change Calculating the acceleration from a velocity-time graph Recalling and applying the Physics equations Understanding prefixes that determine size Leaving answers to significant figures and using standard form Helpful hints and step-by-step guides are used throughout the lesson to support the students and some of the worksheets are differentiated two ways to provide extra assistance. Due to the detail of this lesson, it is estimated that it will take in excess of 3 hours of GCSE teaching time to cover the tasks and for this reason it can be used over a number of lessons as well as during different times of the year for revision.

This fully-resourced lesson explains how genetic fingerprinting can be used to analyse DNA fragments and explores its applications in forensic science and medical diagnosis. The engaging and detailed PowerPoint and accompanying resource have been written to cover all of point 8.4.3 of the AQA A-level Biology specification Each step of the genetic fingerprinting process is covered and time is taken to ensure that key details are understood. Students will be introduced to VNTRs and will come to recognise their usefulness in human identification as a result of the variability between individuals. Moving forwards, the involvement of the PCR and restriction enzymes are discussed and students are challenged on their knowledge of this process and these substances as they were encountered in a previous sub-topic. The main section of the lesson focuses on the use of gel electrophoresis to separate DNA fragments (as well as proteins) and the key ideas of separation due to differences in base pair length or molecular mass are discussed and explained. As well as current understanding checks, an application question involving Huntington’s disease is used to challenge their ability to apply their knowledge of the process to an unfamiliar situation. The remainder of the lesson describes how the DNA is transferred to a membrane and hybridisation probes are used to create a pattern on the X-ray film. Time has been taken to make continuous links to the previous lessons in topic 8 as well as those from topic 4 where DNA, RNA and protein synthesis were introduced.

A detailed and engaging lesson presentation (52 slides) and accompanying worksheet that looks at competition between organisms and the different types of relationships that exist as a result of this interaction. The lesson begins by looking at the meaning of the biological term, "competition", and then introduces this when it occurs between the same species and different species. Students are challenged to consider the different resources that animals compete for before an activity based competition is used to get them to recognise how this competition can cause changes to the population size. Moving forwards, students will meet the three main types of ecological relationship and look at them in greater detail, with predation being a main focus. There are regular progress checks throughout the lesson (with displayed answers) so that students can assess their understanding. This lesson has been designed for GCSE students but can be used with more-able KS3 students who are looking at ecosystems and the relationships that exist within them

This lesson describes how genetic diversity within, or between species, can be investigated by comparison of characteristics or biological molecules. The PowerPoint and accompanying worksheets are primarily designed to cover the content of point 4.7 of the AQA A-level Biology specification but as this is the last lesson in the topic, it has also been planned to contain a range of questions, tasks and quiz rounds that will challenge the students on their knowledge and understanding of topic 4. Over the course of the lesson, the students will discover that comparisons of measurable or observable characteristics, DNA and mRNA sequences and the primary structure of common proteins can all be used to investigate diversity. Links are continually made to prior learning, such as the existence of convergent evolution as evidence of the need to compare biological molecules as opposed to the simple comparison of phenotypes. The issues associated with a limited genetic diversity are discussed and the interesting biological example of the congenital dysfunctions consistently found in the Sumatran tigers in captivity in Australia and New Zealand is used to demonstrate the problems of a small gene pool. Moving forwards, the study of the 16S ribosomal RNA gene by Carl Woese is introduced and students will learn that this led to the adoption of the three-domain system in 1990. The final part of the lesson describes how the primary structure of proteins like cytochrome c that is involved in respiration and is therefore found in most living organisms can be compared and challenges the students to demonstrate their understanding of protein synthesis when considering the differences between humans and rhesus monkeys.

This extensive and fully-resourced lesson describes the principles and explains the techniques used in the production of recombinant DNA in genetic engineering. Both the engaging PowerPoint and accompanying resources have been written to cover points 6.1.3 (f) (i & ii) of the OCR A-level Biology A specification. The lesson begins with a definition of genetic engineering and recombinant DNA to allow students to begin to understand how this process involves the transfer of DNA fragments from one species to another. Links are made to the genetic code and transcription and translation mechanisms, which were met in module 2, in order to explain how the transferred gene can be translated in the transgenic organism. Moving forwards, the method involving reverse transcriptase and DNA polymerase is introduced and their knowledge of the structure of the polynucleotides and the roles of enzymes is challenged through questions and discussion points. Restriction enzymes are then introduced and time is taken to look at the structure of a restriction site as well as the production of sticky ends due to the staggered cut on the DNA. A series of exam-style questions with displayed mark schemes are used to allow the students to assess their current understanding. The second half of the lesson looks at the culture of transformed host cells as an in vivo method to amplify DNA fragments. Students will learn that bacterial cells are the most commonly transformed cells so the next task challenges their recall of the structures of these cells so that plasmid DNA can be examined from that point onwards. The following key steps are described and explained: • Remove and prepare the plasmid to act as a vector • Insert the DNA fragment into the vector • Transfer the recombinant plasmid into the host cell • Identify the cells which have taken up the recombinant plasmid • Allow the transformed host cells to replicate and express the novel gene Time is taken to explore the finer details of each step such as the addition of the promoter and terminator regions, use of the same restriction enzyme to cut the plasmid as was used to cut the gene and the different types of marker genes. As well as understanding and prior knowledge checks, quick quiz competitions are used throughout the lesson to introduce key terms such as cDNA and EcoR1 in a memorable way.

A fully-resourced lesson which looks at the meaning of the rate of reaction and guides students through calculating both the mean and instantaneous rate of reaction. The lesson includes a concise lesson presentation (19 slides) and a question worksheet which is differentiated two ways. The lesson begins by challenging the students to suggest the missing factor in the rate of reaction equation so they can learn that either the mass of a reactant or a mass of a product could be used. Links are made to practical skills as students will understand that if a product is in the gaseous form, the volume produced within a set time will enable the rate to be calculated. Worked examples are used to show the students how to calculate the mean rate of reaction and then the instantaneous using a tangent. The rest of the lesson involves collecting data from an experiment to calculate the rate of reaction. The questions associated with the practical have been differentiated so students who need assistance can still access the learning. This lesson has been written for GCSE students

This is a fast-paced lesson which goes through the main steps of selective breeding and looks at the potential risks of this process. The lesson begins by looking at the characteristics of a number of organisms that would be selected. Time is taken to ensure that students understand that selective breeding is not a new thing and has been going on for a very long time and therefore some of the problems associated with this are now being experienced. The actual process is reduced down into 5 steps which can be recalled and applied to questions. The remainder of the lesson looks at the potential issues with selective breeding. The reduction in the nose size of pugs is explored as an example of the health problems which bred animals may face. This lesson has been written for GCSE students.

The Pearson Edexcel A-level Biology A (Salters Nuffield) specification states that a minimum of 10% of the marks across the assessment papers will require the use of mathematical skills. This revision lesson has been designed to include a wide range of activities that challenge the students on these exact skills because success in the maths in biology questions can prove the difference between one grade and the next! Step-by-step guides are used to walk students through the application of a number of the formulae and then exam-style questions with clear mark schemes (which are included in the PowerPoint) will allow them to assess their progress. Other activities include differentiated tasks, group discussions and quick quiz competitions such as “FROM NUMBERS 2 LETTERS” and “YOU DO THE MATH”. The lesson has been written to cover as much of the mathematical requirements section of the specification as possible but the following have been given particular attention: Hardy-Weinberg equation Chi-squared test Calculating size Converting between quantitative units Standard deviation Estimating populations of sessile and motile species Percentages and percentage change Cardiac output Geometry Due to the detail and extensiveness of this lesson, it is estimated that it will take in excess of 2/3 hours of A-level teaching time to work through the activities and it can be used throughout the duration of the course