A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
This lesson describes the principles of homeostasis and the differences between negative feedback and positive feedback. The PowerPoint and accompanying resources have been designed to cover point 5.1.1 [c] of the OCR A-level Biology A specification and explains how this feedback control maintains systems within narrow limits but has also been planned to provide important details for upcoming topics such as osmoregulation, thermoregulation and the depolarisation of a neurone.
The normal ranges for blood glucose concentration, blood pH and body temperature are introduced at the start of the lesson to allow students to recognise that these aspects have to be maintained within narrow limits. A series of exam-style questions then challenge their recall of knowledge from topics 1-8 to explain why it’s important that each of these aspects is maintained within these limits. The students were introduced to homeostasis at GCSE, so this process is revisited and discussed, to ensure that students are able to recall that this is the maintenance of a state of dynamic equilibrium. A quick quiz competition is used to reveal negative feedback as a key term and students will learn how this form of control reverses the original change and biological examples are used to emphasise the importance of this system for restoring levels to the limits (and the optimum). The remainder of the lesson explains how positive feedback differs from negative feedback as it increases the original change and the role of oxytocin in birth and the movement of sodium ions into a neurone are used to exemplify the action of this control system.
This fully-resourced lesson describes how genes can be switched on and off by DNA transcription factors, including hormones. The PowerPoint and accompanying resources have been designed to cover point 7.16 as detailed in the Pearson Edexcel A-level Biology A specification but also links to topic 3 when the lac operon was described in relation to differential gene expression.
This is one of the more difficult concepts in this A-level course and therefore key points are reiterated throughout this lesson to increase the likelihood of student understanding and to support them when trying to make links to actual biological examples in living organisms. There is a clear connection to transcription and translation as covered in topic 2, so the lesson begins by reminding students that in addition to the structural gene in a transcription unit, there is the promotor region where RNA polymerase binds. Students are introduced to the idea of transcription factors and will understand how these molecules can activate or repress transcription by enabling or preventing the binding of the enzyme. At this point, students are challenged on their current understanding with a series of questions about DELLA proteins so they can see how these molecules prevent the binding of RNA polymerase. Their remainder of the lesson looks at the ER receptor and students will learn that this factor is normally inactive due to an inhibitor being attached. This will then introduce oestrogen as the hormone which binds to the receptor, causing the inhibitor to be released and activating the factor. The main task then challenges them to order statements containing the detailed events that follow the binding of oestrogen.
The lesson in topic 3 on gene expression which describes the lac operon has also been uploaded for free.
This lesson describes the non-specific responses of the body to infection which include inflammation, lysozyme action, interferon and phagocytosis. The detailed PowerPoint and accompanying resources have been primarily designed to cover the content of point 6.8 of the Edexcel International A-level Biology specification but key details such as antigen-presentation are also introduced to prepare students for upcoming lessons on the immune response (6.9 & 6.10).
At the start of the lesson, the students are challenged to recall that cytosis is a suffix associated with transport mechanisms and this introduces phagocytosis as a form of endocytosis which takes in pathogens and foreign particles. This emphasis on key terminology runs throughout the course of the lesson and students are encouraged to consider how the start or end of a word can be used to determine meaning. The process of phagocytosis is then split into 5 key steps and time is taken to discuss the role of opsonins as well as the fusion of lysosomes and the release of lysozymes. A series of application questions are used to challenge the students on their ability to make links to related topics including an understanding of how the hydrolysis of the peptidoglycan wall of a bacteria results in lysis. Students will be able to distinguish between neutrophils and monocytes from a diagram and at this point, the role of macrophages and dendritic cells as antigen-presenting cells is described so that it can be used in the next lesson. The importance of cell signalling for an effective immune response is discussed and the rest of the lesson focuses on the release of two chemicals - interferons and histamine. During the interferon section, references are made to a previous lesson on HIV structure and action so students can understand how the release of these signalling proteins helps neighbouring cells to heighten their anti-viral defences. A step by step guide is used to describe the release of histamine in the inflammatory response and the final task challenges students to use this support to form a detailed answer regarding the steps in inflammation.
This lesson describes the detailed structure of a skeletal muscle fibre and the structural and physiological differences between fast and slow twitch fibres. The engaging PowerPoint and acccompanying resources have been designed to cover points 7.10 (i) & (ii) of the Edexcel International A-level Biology specification.
The start of the lesson uses an identification key to emphasise that skeletal muscle differs from cardiac and smooth muscle due to its voluntary nature. It is important that key terminology is recognised so once myology has been revealed as the study of muscles, key structural terms like myofibril, myofilament and myosin can be introduced. Moving forwards, students will be shown the striated appearance of this muscle so they can recognise that some areas appear dark where both myofilaments are found and others as light as they only contain actin or myosin. A quiz competition is used to introduce the A band, I band and H zone and students then have to use the information given to label a diagram of the myofibril.
This part of the lesson has been specifically planned to prepare the students for the upcoming lesson which describes the contraction of skeletal muscles by the sliding filament mechanism
The rest of the lesson focuses on the structural and physiological differences between fast and slow twitch fibres and the following characteristics are covered:
Reliance on the aerobic or anaerobic pathways to generate ATP
Resistance to fatigue
mitochondrial density
capillary density
myoglobin content (and colour)
fibre diameter
phosphocreatine content
glycogen content
A wide variety of tasks are used to cover this content and include knowledge recall and application of knowledge exam-style questions with fully-displayed mark schemes as well as quick quiz competitions to maintain motivation and engagement.
This lesson explains how ionic bonds are formed to form ions and describes the structure of an ionic compound. The engaging lesson PowerPoint and accompanying resources have been designed to cover points 1.21 and 1.27 of the Edexcel GCSE Chemistry specification and this also covers those points on the Combined Science specification.
The lesson begins by introducing the name of the type of bond, but does not go into any more detail at this stage. This is because the lesson is designed to allow the students to discover that in order for both of the atoms involved to get a full outer shell, electrons have to be transferred from one to the other. Over the course of the lesson, students will recognise that it is the metal that loses the electrons and becomes a positive ion whilst the non-metal gains the electrons and becomes a negative ion. There are lots of discussion and discovery points like this written into the lesson so that students can take ownership for their learning. Students are guided through drawing dot and cross diagrams to represent these compounds and as a result links are made to the topics of naming compounds, writing chemical formulae, forming ions and electron configurations. There are a number of quick competitions in the lesson which introduce new terms to the students. One such competition introduces the term lattice and the lesson builds from here to understand why ionic compounds have high melting and boiling points. Moving forwards, students will also learn that solid ionic compounds cannot conduct electricity whilst those in molten form or in an aqueous solution are able to. The final task of the lesson challenges the students to bring all of the information together they have seen to draw a dot and cross diagram for aluminium oxide, explain how it was formed and then explain how aluminium is extracted from this compound by electrolysis. This final task has been differentiated so that students who need extra assistance can still access the learning.
This lesson has been written for GCSE aged students but could be used with higher ability younger students who are pushing on with the elements, compounds and mixtures topic
This fully-resourced lesson describes how the cells of multicellular organisms are specialised for particular functions and organised into tissues, organs and organ systems. The detailed and engaging PowerPoint and accompanying resources have been designed to cover points 2.1.6 (h, i, j and k) of the OCR A-level Biology A specification and also describes how stem cells differentiate, including the production of erythrocytes (red blood cells) and neutrophils.
The start of the lesson focuses on the difference in the SA/V ratio of an amoeba and a human in order to begin to explain why the process of differentiation is critical for multicellular organisms. Students will discover that a zygote is a stem cell which can express all of the genes in its genome and divide by mitosis. Time is then taken to introduce gene expression as this will need to be understood in the later topics of the course. Moving forwards, the lesson uses the process of haematopoiesis from haematopoietic stem cells to demonstrate how the red blood cell and neutrophil differ significantly in structure despite arising from the same cell along the same cell lineage. A series of exam-style questions will not only challenge their knowledge of structure but also their ability to apply this knowledge to unfamiliar situations. These differences in cell structure is further exemplified by the epithelial cells of the respiratory tract and students will understand why the shape and arrangement of these cells differ in the trachea and alveoli in line with function. The link between specialised cells and tissues is made at this point of the lesson with these examples of epithelium and students will also see how tissues are grouped into organs and then into organ systems.
The remainder of the lesson focuses on specialised plant cells and the differing shapes and features of the palisade and spongy mesophyll cells and the guard cells are covered at length and in detail. Step by step guides will support the students so that they can recognise the importance of the structures and links are made to upcoming topics such as the vascular tissues so that students are prepared for these when covered in the future.
This concise lesson has been written to cover specification point 5.1.1 (d) of the OCR A-level Biology A specification which states that students should be able to apply an understanding of the behavioural responses in temperature control in ectotherms. The main aim when designing the lesson was to support students in making sensible and accurate decisions when challenged to explain why these types of organisms have chosen to carry out a particular response. A wide range of animals are used so students are engaged in the content matter and are prepared for the unfamiliar situations that they will encounter in the final exam. Time is also taken to compare ectotherms against endotherms so that students can recognise the advantages and disadvantages of ectothermy.
This lesson has been written for A-level students studying on the OCR A-level Biology A course. Lessons on temperature control in endotherms and the principles of homeostasis and cell signalling, which are also in module 5.1.1, are also available so please download those too as they will allow students to make connections between one lesson, the previous and the next.
This detailed lesson describes how urea is formed in the liver by deamination and then removed from the bloodstream by ultrafiltration at the kidney. The PowerPoint and accompanying resources have been designed to cover point 9.9 (ii) of the Edexcel A-level Biology B specification.
The first part of the lesson describes how deamination and the ornithine cycle forms urea. Although the students are not required to know the details of the cycle, it is important that they are aware of how the product of deamination, ammonia, is converted into urea (and why). Moving forwards, the rest of the lesson has been written to allow the students to discover ultrafiltration as a particular function and to be able to explain how the mechanisms found in the glomerulus and the Bowman’s capsule control the movement of small molecules out of the blood plasma. Key terminology is used throughout and students will learn how the combination of the capillary endothelium and the podocytes creates filtration slits that allow glucose, water, urea and ions through into the Bowman’s capsule but ensure that blood cells and plasma proteins remain in the bloodstream. A number of quiz competitions are used to introduce key terms and values in a fun and memorable way whilst understanding and prior knowledge checks allow the students to assess their understanding of the current topic and to challenge themselves to make links to earlier topics. The final task of the lesson challenges the students to apply their knowledge by recognising substances found in a urine sample that shouldn’t be present and to explain why this would cause a problem
An engaging lesson presentation (65 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit B1 (Cell-level systems) of the OCR Gateway A GCSE Biology specification
The topics that are tested within the lesson include:
Plant and animal cells
Bacterial cells
Light and electron microscopy
DNA
Transcription and translation
Enzymes
Photosynthesis
Students will be engaged through the numerous activities including quiz rounds like “Shine a LIGHT on any errors" whilst crucially being able to recognise those areas which need further attention
This lesson describes how the products of the light-independent reactions of photosynthesis are used by plants, animals and other organisms. The engaging and detailed PowerPoint and accompanying resources have been primarily designed to cover point 5.4 (ii) of the Edexcel International A-level Biology specification concerning the uses of GP and GALP but as the lesson makes continual references to biological molecules, it can act as a revision tool for a lot of the content of topic 1 and 2.
The previous lesson described the light-independent reactions and this lesson builds on that understanding to demonstrate how the intermediates of the cycle, GP and GALP, are used. The start of the lesson challenges the students to identify two errors in a diagram of the cycle so that they can recall that most of the GALP molecules are used in the regeneration of ribulose bisphosphate. A quiz version of Pointless runs throughout the lesson and this is used to challenge the students to recall a biological molecule from its description. Once each molecule has been revealed, time is taken to go through the details of the formation and synthesis of this molecule from GALP or from GP in the case of fatty and amino acids. The following molecules are considered in detail during this lesson:
glucose (and fructose and galactose)
sucrose
starch and cellulose
glycerol and fatty acids
amino acids
nucleic acids
A range of activities are used to challenge their prior knowledge of these molecules and mark schemes are always displayed for the exam-style questions to allow the students to assess their understanding.
As detailed above, this lesson has been specifically written to tie in with the earlier lessons in this topic on the structure of the chloroplast and the light-dependent and light-independent reactions of photosynthesis
This fully-resourced lesson describes how light and electron microscopy can be used to observe cells and cell structures. The engaging PowerPoint and accompanying resources have been designed to cover the content of points 2.1.1 (a) & (f) of the OCR A-level Biology A specification and also describes the difference between magnification and resolution
As this is likely to be one of the very first lessons that students cover in their A-level studies, it’s important to maintain motivation from the off whilst covering the detailed and important content of microscope studies. In line with this, all of the lessons in module 2.1.1 (cell structure) have an ongoing quiz competition where points can be won in rounds that introduced key terms and values. A quiz scoresheet is included within the resources so that the teacher can keep track of the scores over the 7 lessons in the module and the winning team can be revealed at the end of the last lesson.
In this lesson, the quiz rounds are interspersed between a range of tasks which cover the following content:
The use of the light microscope to observe cells
The total magnification as a product of the power of the eyepiece and objective lens
An introduction to the importance of staining
The difference between magnification and resolution
The use of the TEM
The use of the SEM
Due to the detail included in this lesson, it is estimated that it will take in excess of 2 hours of allocated A-level teaching time to cover the content
This fully-resourced lesson describes the differences between resolution and magnification, with reference to light and electron microscopy and the engaging PowerPoint and accompanying resources have been designed to cover the content of point 1.1 (d) of the CIE A-level Biology specification.
To promote engagement and focus throughout these 3 lessons in topic 1.1 (The microscope in cell studies), the PowerPoint includes an ongoing quiz competition and a score sheet is found within the resources to keep track of the cumulative scores. The quiz rounds found in this lesson will introduce the objective lens powers, the names of the parts of a light microscope and emphasise some of the other key terms such as resolution. The final round checks on their understanding of the different numbers that were mentioned in the lesson, namely the differing maximum magnifications and resolutions. Time is taken to explain the meaning of both of these microscopic terms so that students will understand their importance when looking at the cell structures in topic 1.2. By the end of the lesson, the students will be able to explain how a light microscope uses light to form an image and will understand how electrons transmitted through a specimen or across the surface will form an image with a TEM or a SEM respectively.
As detailed above, this lesson has been written to tie in with the previous lesson on measuring cells and units as well as the next lesson on calculating actual size.
This detailed lesson explains how the process of transcription results in the production of the single-stranded nucleic acid, mRNA. Both the detailed PowerPoint and accompanying resource have been designed to specifically cover the third part of point 2.1.3 of the OCR A-level Biology A specification but also provides important information that students can use when being introduced to splicing and gene expression in module 6.
The lesson begins by challenging the students to recognise that most of the nuclear DNA in eukaryotes does not code for polypeptides. This allows the promoter region and terminator region to be introduced, along with the structural gene. Through the use of an engaging quiz competition, students will learn that the strand of DNA involved in transcription is known as the template strand and the other strand is the coding strand. Links to previous lessons on DNA and RNA structure are made throughout and students are continuously challenged on their prior knowledge as well as they current understanding of the lesson topic. Moving forwards, the actual process of transcription is covered in a 7 step bullet point description where the students are asked to complete each passage using the information previously provided. So that they are prepared for module 6, students will learn that the RNA strand formed at the end of transcription in eukaryotes is a primary transcript called pre-mRNA and then the details of splicing are explained. An exam-style question is used to check on their understanding before the final task of the lesson looks at the journey of mRNA to the ribosome for the next stage of translation.
This lesson has been written to challenge all abilities whilst ensuring that the most important details are fully explained.
This fully-resourced lesson has been designed to cover the specification point about co-dominance (and blood groups) as detailed in the supplement section of topic 17 (inheritance) of the CIE IGCSE Biology specification. As specified in this point, students will learn how this inheritance of the ABO blood group system demonstrates co-dominance (and also multiple alleles). A potentially difficult topic, time has been taken to include guidance sections where students are walked through the interpretation of the different genotypes to find out the phenotypes as well as constructing genetic diagrams and calculating blood groups from pedigree trees. There is a real focus on genetic terminology such as allele, locus, genotype and phenotype so that the understanding is deep and students can use this if they choose to further their studies at A-level.
This lesson has been designed for GCSE-aged students studying the CIE IGCSE Biology course but is also suitable for older students who are learning about codominance and multiple alleles at A-level
This is a fully-resourced REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Electricity) of the OCR GCSE Physics A 9-1 specification.
The specification points that are covered in this revision lesson include:
Describe the production of static electricity, and sparking, by rubbing surfaces, and evidence that charged objects exert forces of attraction or repulsion on one another when not in contact
Explain how transfer of electrons between objects can explain the phenomena of static electricity
Recall that current has the same value at any point in a single closed loop
Recall and apply: potential difference (V) = current (A) x resistance (Ω)
Recall and apply: power (W) = potential difference (V) x current (A) = (current (A))2 x resistance (Ω)
Describe the differences between series and parallel circuits
Represent d.c. circuits with the conventions of positive and negative terminals, and the symbols that represent common circuit elements
Recall that current (I) depends on both resistance ® and potential difference (V) and the units in which these are measured
Recall and apply the relationship between I, R and V, and that for some resistors the value of R remains constant but that in others it can change as the current changes
Explain that for some resistors the value of R remains constant but that in others it can change as the current changes
Use graphs and relate the curves produced to the function and properties of circuit elements
Calculate the currents, potential differences and resistances in d.c. series and parallel circuits
Apply the equations relating potential difference, current, quantity of charge, resistance, power, energy, and time, and solve problems for circuits which include resistors in series, using the concept of equivalent resistance
Students will be thoroughly engaged throughout the lesson due to the range of activities which include quiz competitions such as “GRAFT over these GRAPHS” where they compete to be the 1st to recognise a particular component from its resistance graph. The main two question tasks are differentiated so that students who need extra assistance can still access the work and challenge their knowledge. This lesson is suitable to be used as a revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams
This fully-resourced REVISION LESSON is detailed and engaging and covers the content of topic 18 (Biodiversity, classification and conservation) of the CIE International A-level Biology specification. This topic is often viewed as less interesting than other topics by the students but is well represented in the exams in terms of questions and so a lot of time has gone into the design to include a wide range of activities which will allow them to assess their knowledge whilst remaining motivated. All of the exam questions have full answers so students can identify any missed marks and most of the tasks are differentiated to allow students of differing abilities to access the work and remain challenged.
The lesson was planned to cover as much of the specification as possible but the following sub-topics have received particular attention:
The biological classification of a species
Using Simpsons Index of diversity to calculate the biodiversity of the habitat
The reasons to maintain biodiversity
Methods of protecting endangered species
The use of assisted reproduction in conservation
Different methods of sampling
The taxonomic hierarchy
The characteristic features of the domains and kingdoms
Links to the other topics of the specification are made throughout the lesson and there is also a mathematical focus to ensure that the students are comfortable when presented with the numerical challenges
Due to the extensiveness of this resource, it is likely to take at least 2 lessons to cover all of the activities
This is a fully-resourced lesson which uses exam-style questions, engaging quiz competitions, quick tasks and discussion points to challenge students on their understanding of topics C1 & C6 - C8, that will assessed on PAPER 4. It has been specifically designed for students on the Edexcel GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the key ideas are known and understood.
The lesson has been written to cover as many specification points as possible but the following sub-topics have been given particular attention:
Hydrocarbons
The homologous series of alkanes
Empirical formula
Covalent dot and cross diagrams
Fractional distillation of crude oil
The properties of the different fractions
The complete combustion of a hydrocarbon
Changes in the carbon dioxide levels in the atmosphere
Deforestation
Changes in the Earth’s atmosphere
Polluting gases
The formation of acid rain
Detecting oxygen and chlorine
The properties of the halogens
Metals vs non-metals
The reaction of alkali metals with water
Explaining the pattern of reactivity of the alkali metals
The collision theory
Endothermic and exothermic reactions
In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for extra support when they are unable to begin a question. Step-by-step guides have also been written into the lesson to walk students through some of the more difficult concepts such as the changes in the Earth’s atmosphere and explaining the reactivity of the alkali metals in terms of electronic configurations.
Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 3 teaching hours to complete the tasks and therefore this can be used at different points throughout the duration of the course as well as acting as a final revision before the PAPER 4 exam.
This is a fully-resourced REVISION lesson which prepares the students for the various types of questions that they can encounter on PAPER 1 of the Pearson Edexcel GCSE Combined Science course. The lesson uses a wide range of activities to challenge the students on their knowledge of the content of topics B1 - B5 and has been specifically designed for students taking the HIGHER TIER exam.
The lesson has been designed to take place within a hospital and the students will then visit a number of wards, the pharmacy, the hospital cafe and the museum to allow the following specification topics to be covered:
Cancer and uncontrolled cell division
Meiosis and the production of gametes
Mitosis and the cell cycle
Sex determination
The difference between communicable and non-communicable diseases
The spread of communicable diseases by pathogens
Diseases caused by the four different pathogens
The use of antibiotics to treat bacterial infections
Evolution by natural selection in bacteria and animals
Genetic terminology
The structure of DNA
Inheritance of disorders caused by dominant and recessive alleles
The central nervous system and other structures involved in nervous reactions
Reflex arcs
Risk factors of non-communicable diseases
Osmosis
Fossils as evidence for human evolution
In order to cater for the different abilities that can be found in Combined Science classes, most of the tasks have been differentiated 2 or 3 ways and there are also step by step guides to walk the students through the more difficult concepts like evolution by natural selection and genetic diagrams.
To maintain engagement throughout the lesson, 8 quiz rounds have been written into the lesson which will challenge the students to work within their teams and compete for a range of team points.
The size of this lesson means that it is likely to take in excess of 3/4 teaching hours to cover the detail as necessary and therefore this allows the resource to be used at numerous points throughout the duration of the course as well as just before the terminal exam.
This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic 5 (Atomic Physics) of the CIE IGCSE Physics specification
The sub-topics and specification points (from both the core and supplement sections), that are tested within this revision lesson include:
Atomic model
Nucleus
Detection of radioactivity
Characteristics of the three kinds of emission
Radioactive decay
Half-life
Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual exams
This engaging and fully-resourced lesson looks at the myogenic nature of cardiac muscle and explores the roles of the SAN, AVN and Purkyne tissue (bundle of His) in the initiation and control of heart action. The PowerPoint and accompanying resources have been designed to cover point 3.1.2 (g) of the OCR A-level Biology A specification.
The lesson begins with the introduction of the SAN as the natural pacemaker and then time is given to study each step of the conduction of the impulse as it spreads away from the myogenic tissue in a wave of excitation. The lesson has been written to make clear links to the cardiac cycle and the structure of the heart and students are challenged on their knowledge of this system from topic 3.1.2. Moving forwards, students are encouraged to consider why a delay would occur at the AVN and then they will learn that the impulse is conducted along the Bundle of His to the apex so that the contraction of the ventricles can happen from the bottom upwards. The structure of the cardiac muscle cells is discussed and the final task of the lesson challenges the students to describe the conducting tissue, with an emphasis on the use of key terminology
Due to the detailed nature of this lesson, it is estimated that it will take about 2 hours of A-level teaching time to cover the detail