This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Rates of Reaction’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a ‘Think > Pair > Share’ task whereby students need to consider what it means for a reaction to be in ‘equilibrium’ . After a class discussion, the definition of a reversible reaction (in a closed system) to be at equilibrium is revealed to the class, which they can note down in their books. This is further explained using a set of diagrams to depict what happens to the concentration of reactants and products during the course of a reversible reaction. Students can sketch a graph into their book to show how the equilibrium of a reversible reaction is reached. The next task focuses on ‘Le Chatelier’s Principle’, students are firstly introduced to the idea that the equilibrium of a reversible reaction can be altered by changing the conditions of that reaction, i.e. an increase in temperature. Students will then be shown a set of demonstrations (video links included) for each they will need to note down their observations, identify the conditions which are changing and match the correct reaction to the correct word equation. Pupils will complete a worksheet for this task, which will be assessed using the mark scheme provided. For the next part of the lesson, students will watch a video on the effect of pressure on equilibrium and answer a set of questions. These questions can be self-assessed using the answers provided on the PowerPoint. Students will now ‘Think > Pair > Share’ the effect of an increase in temperature on the equilibrium of a reversible reaction, the answer is then revealed to pupils using an example. Pupils will now complete a ‘Quick Check’ task where they will be required to answer a set of questions about the reversible reactions and the effect of altering conditions on dynamic equilibrium. Pupils can self-assess their work using the answers provided on the PowerPoint. Finally, students will need to complete a summary sheet on the effect of pressure and temperature on the equilibrium of a reversible reactions, students can self assess their work using the answers provided. The plenary task requires pupils to write down three sentences to summarise what they have learnt in today’s lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Resources’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a ‘Think > Pair > Share’ task, pupils will need to consider the definitions of the terms ‘Finite’ and ‘Renewable’. After a discussion in pairs and as a class, the definitions for these words can be revealed which pupils can write in their books. Next, pupils will watch a video on the availability and sustainable use of Earth’s resources, pupils will need to answer a set of questions whilst watching these videos and can self-assess their work once finished. Pupils are now introduced to a variety of natural resources which are getting used up by the chemical industry, students are given a list of these raw materials and are then asked to consider what factors might determine how quickly they may run out and the uncertainties surrounding estimates of how long they will last. After a discussion pupils can mind map their ideas, before the answers revealed and students can self-assess their work. Next, pupils are shown how to calculate orders of magnitude - the skill is demonstrated and then pupils need to have a go at tackling a problem. The next part of the lesson focuses on renewable resources, some examples of renewable energy sources are introduced and then students need to complete a task whereby they read information about different renewable fuel sources and have to sum up the advantages and disadvantages for each. Students can complete a table of their ideas in their books, this task can be self-assessed using the mark scheme. Finally, pupils complete an exam-style question on this topic and self-assess their work. The plenary task requires pupils to summarise what they have learned in the lesson using one of the sentence starters. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please email me at swift.education.uk@gmail.com and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a recap on the reactivity series, students will be asked a seris a questions about certain metals found within the series. Students should be able to identify the metals based upon knowledge learned in previous lessons, once complete this task can be self-assessed using the mark scheme provided. Students will now be introduced to the idea of a ‘displacement reaction’ as a reaction where a more reactive metal found in the reactivity series will displace a less reactive metal. An example is shown - aluminium oxide + iron -> aluminium oxide + iron. Students will then be give a set of reactions, without the products written in, they will need to decide whether a displacement reaction will take place or not. This work can then be marked and corrected using the mark scheme provided. Students will now complete an investigation ‘Competition in Metals’. Students will follow the steps provided on the investigation worksheet to identify whether a displacement reaction has occurred between a number of metals + metal solutions. Students will fill in a results table as they go, noting down any observations as well as identifying if a reaction took place or not. Students can check their answers against the example results table found in the PowerPoint presentation. Lastly, students will complete a ‘True or False’ task, they will be given a set of statements and will need to identify whether they are true or false. This work can be peer or self assessed using the mark scheme provided. The plenary task requires students to complete a sentence starter, from the choice provided, in order to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a recap of particle arrangements in an element, compound and a mixture. Students will be asked to ‘Think > Pair > Share’ their ideas, drawing a diagram of the particle arrangement in each as an extra challenge. After a short discussion, the answers will be revealed so students can check their work. The next task requires students to organise a set of statements into two columns - those statements describing a mixture or describing a compound. This task can then be self-assessed using the mark scheme provided once complete. Students are now asked to ‘Think > Pair > Share’ their ideas about what the term ‘pure’ means. After a short class discussion, the definitions (along with examples) for pure and impure substances are provided. Students will now complete an investigation to test three different water samples for purity. Using a pH test and an evaporation test students need to decide which of the samples are pure and which are impure. Students will have the chance to report their findings to the rest of the classroom, explaining their thoughts on which samples were pure/impure. Lastly, students will watch a video on chemical tests used to check the purity of a substance. Students will need to answer a set of questions whilst watching this video, the answers to which are included in the PowerPoint so students can self-assess their work once it is complete. The plenary task requires students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical calculations’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction of concentration, students learn the definitions of key words such as solute, concentration, solvent and dilute and look at the difference between concentrated and dilute solutions. Students will then be shown a selection of diagrams and students will need to which shows the most concentrated and the most dilute solutions. Pupils will now be introduced to the calculation for concentration, students will need to use this calculation to work out a set of problems. Students can self-assess their work using the answers provided. The next set of problems will require pupils to rearrange the equation and also convert units of measurements, again pupils should show all of their working for each of these problems. The answers for these problems are included in the PowerPoint presentation, students can now use this to self-assess their work. The next part of the lesson focuses on titration, firstly students will answer a set of questions whilst watching a video. This work can be assessed using the mark scheme provided. Students will then be given a card sort, they will need to rearrange the cards into the correct order to describe the steps taken during a titration, which can then be assessed using the answers provided. The plenary task is for pupils to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson starts with a video on ionic bonding, students need to watch the video and answer a set of questions, once complete pupils can self-assess their work. Pupils are then asked to think > pair > share how the group number relates to the charge on the ions formed from that group. Using the PowerPoint presentation you can then demonstrate the link between group number and number of electrons lost/gained by a specific atom, students can use these rules to help work out the charges on ions formed. To assess their knowledge of this, pupils will be asked to copy and complete a table to identify the number of protons, electron, the electronic configuration of an atom and of the ion of that atom, as well as the ion’s charge. Pupils can self or peer assess their work using the answers provided in the PowerPoint presentation. The next part of the lesson is for pupils to consider the ionic bond formed in calcium chloride, students will first need to draw the electronic configuration of a calcium and chlorine atom and then looking at the structure try and work out how an ionic bond might form between them. Once pupils have had a go you can reveal the answers using the diagrams and descriptions provided in the PowerPoint presentation, for those pupils who were unable to work it out it may be best for them to copy down the diagram in their books. Pupils will now be asked to draw diagrams to demonstrate the ionic bonds formed between a set of elements - calcium and oxygen, potassium and chlorine, sodium and oxygen, magnesium and chlorine. Once complete they can assess and correct their work using the answers provided in the PowerPoint presentation. The last activity is an exam-style question which pupils can complete in silence, and at the back of their books if it is a higher ability class. When complete the work can be red-pen assessed using the mark scheme provided. The plenary activity is for pupils to summarise what they have learnt in the lesson in three sentences, using as many of the key words provided as possible. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Using Our Resources’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students are firstly given a set of different objects on their desks and they are also provided with a list of properties, for each object students need to use the words from the list provided to identify the object’s properties. This work can be self-assessed using the mark scheme provided. The next task for pupils to complete is an ‘Each one, teach one’ task - in pairs, pupils are either given information about glass or ceramics, they need to learn the information and teach each other so they are able to complete a table of information on both. This work can then be peer or self-assessed using the mark scheme provided. Next, pupils will watch a video about different composite materials - they will need to answer a set of questions whilst watching the video and this can be marked using the mark scheme provided. The next activity is for pupils to investigate the differences between reinforced concrete vs. normal concrete. Finally, students will complete a ‘Quick Check’ activity - pupils will need to answer a set of questions to summarise what they have learned this lesson. This work can be self-assessed using the mark scheme provided. The plenary activity requires pupils to write a Whatsapp message to their friends outlining what they have learned during the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with a video animation on melting and freezing, along with written definitions that students could use to take notes down in their books. This leads into a task whereby students need to explain what is happening to the particle arrangement of a solid as it melts in a liquid, and of a liquid as it turns back into a solid during freezing. Students will watch a video first, then will have a go at coming up with their written explanations. Their answers can then be checked against the ones included in the PowerPoint presentation, students can mark and correct their work. Next, students are introduced to the idea of pure and impure substances are an explanation of how this affects the melting point of a substance is included. Students can investigate the melting point of stearic acid by carrying out a practical investigation, the equipment list and method for this investigation is included on the PowerPoint for students to follow. Their results should be recorded in a suitable table and can be plotted onto graph paper as an extension task. Next, students are given a diagram of the changes of state and are asked to draw a particle diagram for each of the states of matter, to show the transition between the states. This work can be self-assessed using the answers provided. Lastly, students will be asked to complete a ‘Progress Check’ task to assess what they have learned so far this lesson. The mark scheme for this task is included on the PowerPoint. The plenary is a ‘pick a plenary’ task, students can either summarise what they have learned so far this lesson in three sentences or write definitions for a set of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to different examples of exothermic reactions, this includes video links to more exciting exothermic reactions like the thermite reaction and the screaming jelly baby. Students are also told the definition for an exothermic reaction. Students are now asked to consider what an endothermic reaction is, now that they know the definition for an exothermic reaction. Students are asked to ‘think > pair > share’ their ideas, eventually feeding back into a class discussion and the definition can then be revealed, as well as two two examples. Students will now watch a video on exothermic and endothermic reactions, whilst watching the video they will answer a set of questions. Once this task has been completed, students can self-assess their work against the mark scheme provided on the PowerPoint. Students will now complete an investigation to identify whether a set of three chemical reactions are exothermic or endothermic. They will start the reaction and then measure the temperature over a set period of time, finally working out the change in temperature to determine which type of reaction has occurred. Students can follow instructions on the practical worksheet and record their results in a table drawn into their books. Finally, students will complete a ‘quick check’ task - whereby they will need to answer a question on the topic of the lesson, this can then be checked against the answer provided on the PowerPoint. The plenary task is an anagram challenge, students need to unscramble a set of anagrams which then spell out a set of key words from the last few lessons on reactions. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be shown a demonstration of magnesium being burnt in air, students are asked to predict whether they think the mass of the product will increase, decrease or stay the same. Students are asked to explain their prediction. The demonstration is then carried out, students should record in their books the mass of the magnesium before burning and then the mass of the magnesium oxide after burning, from this they can deduce the mass of the oxygen needed to burn the magnesium. Students can then check their predictions to see if they were correct or not. Now, students can summarise what they have learned by completing a ‘fill-in-the-blank’ task which is a definition for the ‘conservation of mass’ in chemical reactions. This task can be self-assessed against the mark scheme provided. Students will now also complete a ‘Quick Check’ task where they are asked come questions to test their knowledge of what they have learned so far, this work can also be marked against the mark scheme provided. Students will not complete a match-up task, students are asked to complete the sentences by matching the correct phrases together. This helps students to explore the idea of the law of the conservation of mass, considering how this applies to reactions involving solids, liquids and gases. Again, the mark scheme for this task is included for students to check and correct their work. The latter part of the lesson is on balancing equations, students are firstly introduced to the process by which students should balance an equation, demonstrated by the example of magnesium + oxygen -> magnesium oxide. A few more examples are used to talk students through the process, then students will complete a step-by-step worksheet which introduces them to balancing equations at a basic level. The mark scheme for this task is included in the PowerPoint for students to self-assess their work. The plenary task requires students to complete a 3-2-1 reduction of the lesson, to include 3 facts 2 key words and 1 question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the elements found within Group 1 of the Periodic Table - The Alkali Metals. Students will also learn some of the properties of the Alkali Metals which make them similar to other metals. Students will now focus on the reaction of alkali metals with water, students will learn what happens with lithium is placed in water - including the word equation for this reactions. After learning this, students will then need to copy and complete the word equations of other alkali metal reactions with water. This task can then self-assessed using the mark scheme provided. Students will now draw a table in their books before watching a video on the different reactions of Group 1 metals with water. Students will need to note down observations whilst watching the video. After completing this task, students are asked to ‘Think > Pair > Share’ their ideas about how they think rubidium and caesium will react with water. After this task, students can assess their work and also watch a another video to find out if their predictions about rubidium and caesium were correct. The next activity requires students to read a paragraph of information about the alkali metals, students will then need to answer a set of questions using this information. Once complete students can self-assess their work using the answers provided on the PowerPoint. The last activity is a ‘True or False’ activity, students will need to decide whether the statements are correct or not. The answers are provided for this task so students can check their work. The plenary activity requires students to write down three facts, three key words and one question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a video on the process of ‘boiling’, students will need to answer a set of questions whilst watching the video. Once complete students can self-assess their work using the mark scheme provided. Students are then shown a method they could use to measure the boiling point of a liquid, they are given tips for what to look out for - e.g. bubbles of gas forming in the liquid and also an increase in temperature which then plateaus at a certain point without increasing further. Next activity is a ‘progress check’, students are asked to copy and complete a set of sentences to outline the process of boiling. This task can then be marked using the mark scheme provided on the PowerPoint. The next part of the lesson focuses on an investigation, students are asked to firstly think about why salt might be added to a pan of boiling water when cooking pasta. After a short class discussion, students will need to come up with a prediction of how adding salt to water will affect the boiling point of water - will it make it higher or lower? After making the prediction, students will now conduct the experiment to investigate the effect of salt on the boiling point of water. Results should be written into a results table, followed by plotting a graph of their results and writing a conclusion. The last section of the lesson focuses on the usefulness of boiling points and melting points of substances for predicting the state they are in. Students are provided with the melting point and boiling point of magnesium and are asked to predict the state of the metal at certain temperatures. This work can be marked and corrected using the mark scheme provided. Lastly, students are given a set of questions based upon what they have learned so far this lesson, they should indicate the correct answers with either thumbs up, thumbs down or thumb in the middle. The plenary task requires students to write a list of key words from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical calculation’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students will firstly be introduced to the concept of a limiting reactant, using the example of hydrochloric acid and magnesium. Pupils will then be shown the steps to take to work out the limiting reactant of a reaction, using a worked example. Using this example students can then complete a set of questions on limiting reactants, the answers these questions are provided in the PowerPoint presentation. Next pupils will watch a video on percentage yield, they will need to answer a set of questions using the video. Once complete pupils can self-assess their answers against the answers provided. Pupils will then be provided with a set of steps to help them work out the percentage yield of a chemical reaction, pupils can check they have completed this task correctly using the answers on the PowerPoint. The last task is a worksheet of percentage yield problems, pupils will need to show their working for each question. The answers are again provided on the PowerPoint presentation for pupils to self-assess their work. The plenary task is for pupils is a key word and Ar bingo task, pupils should choose 6 keys words/relative atomic masses from th board. The teacher will then read out clues, if students think that they have the word/Ar they can cross it out, first to cross all 6 our shouts bingo! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will firstly come up with a mind map of ideas about why water is such an important resource, they can discuss with their partner and write their ideas in their books. Some of the reasons can then be revealed via the PowerPoint presentation and pupils can assess their work - making corrections where necessary. Pupils are then shown a quick recap of the stages involved in the water cycle, before beginning to look at the treatment of fresh water and purification of salt water. Students will be given a worksheet of questions, around the room will be information sheet on how fresh water is turned into potable, drinking water and how sea water is purified. Pupils will need to read the information posters to answer their questions, this work can then be self-assessed using the mark scheme provided. The next part of the lesson will focus on waste water treatment, pupils will watch a video on the steps involved with sewage treatment. Pupils will answer a set of questions whilst watching the video, this work can then be self-assessed using the answers provided. The final task is for pupils to complete an exam-style question on this topic, they can answer in their books and either self or peer assess using the mark scheme provided. Finally, pupils will be given a set of answers, they will need to come up with questions which match these answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Chemistry GCSE, particularly the ‘Atomic Structure & Periodic Table’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with an introduction to the group that alkali metals are found in, this then is followed by a video about the metals where pupils will be required to answer questions, these can then be self-assessed. Next, the PowerPoint slides explain why, in terms of electronic configuration, the alkali metals increase in reactivity as you go down the group. Pupils can summarise this information using a fill-in-the-blank task, which can then be self-assessed. The reaction with alkali metals can then be modelled (practically you can show a demo of this) and pupils will need to be able to complete the word equation for this reaction, using a worked example of lithium and water pupils will need to fill int he word equations for other alkali metals. This work can be self-assessed. Pupils will then be given a set of information about the properties of alkali metals and about their reaction with oxygen and chlorine. Using this information pupils will need to complete questions, as well as compete work equations showing the reaction of various alkali metals with either oxygen or chlorine. Again, all answers to this work is provided so pupils can self or peer assess their work… The plenary task is a true or false task, which pupils could complete on their own at the back of their books. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a video on covalent bonding, pupils will need to watch the video and answer a set of questions. When pupils are finished their work can be marked using the answers provided. The next activity is a crossword on covalent bonding, this too can be self-assessed using the answers provided on the PowerPoint. The next part of the lesson focuses on simple covalent molecules, firstly pupils are introduced to the idea that covalent structures are either simple molecules or giant structures. Pupils will be shown dot and cross diagram of a hydrogen molecule and asked to have a go at drawing a dot and cross diagram of a chlorine molecule. Once this work has been checked, pupils are then shown how to draw a dot and cross diagram of a double bond and triple bond (oxygen molecule and nitrogen molecule), it may be beneficial for pupils to draw these diagrams in their books for future reference. The lesson now focuses on some of the properties of simple covalent molecules, then pupils will be asked to draw a dot and cross diagram to show the structure of water, methane and ammonia. Once this task is complete, students can assess their work using the answers provided on the PowerPoint presentation. The final task is a true or false task, pupils are given a set of statements about covalent bonding. They will need to identify if true or false, this can be done as a whole class using white-boards or in their books. The plenary task is for pupils to unscramble anagrams of words relating to the bonding topic. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)