This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Motion & Pressure’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a a ‘Think > PAir > Share’ task, students are provided with some information about ice road truckers, students are asked to consider whether the job of an ice road trucker is too risky. Students are also asked to discuss the meaning of the term ‘pressure’ - after a short class discussion the definition for the term ‘pressure’ will be revealed to students, they can make a note of this in their books. Students are now introduced to the formula for pressure (pressure = force / area), using this formula students will complete a couple of tasks where they will work through a set of pressure problems. Once complete this task can then be self-assessed using the mark scheme provided. Students will now complete an activity where they will work out the pressure they exert on the ground. Lastly, students will complete a ‘copy and correct’ task, they will be given a paragraph of information related to what they have learned this lesson. They will need to copy it out, correcting any parts they believe to be wrong. This task can the self-assessed using the mark scheme provided once it is complete. The plenary task requires students to complete an ‘exit card’ to summarise what they have learned this lesson, the exit card will include three key words, one fact and one questions for students to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a list of minerals that plants need to survive - magnesium, phosphates, nitrates and potassium. Students will need to ‘Think > Pair > Share’ their ideas about how plants receive their minerals. After a short class discussion, students will be shown a diagram which demonstrates how mineral ions are taken up by the plant. Students will now watch a video, this video will go through some of the symptoms of different mineral deficiencies. Whilst watching the video, students will need to note down these symptoms. This task can be marked and corrected against the mark scheme provided once complete. The next part of the lesson will focus on farming methods, students will each be given a different bit of information on a method employed by farmers to increase crop yield. Students will need to walk around the room to share information on these methods in order to complete a summary table. This can then be self-assessed using the mark scheme provided on the PowerPoint. Lastly, students will now design and complete a pamphlet of information for farmers to help them decide which type of minerals their plants may be deficient in, this should include images of a healthy plant as well as unhealthy plants depicting various mineral deficiencies. The plenary task requires students to write a Whatsapp message to a friend, explaining what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to cells as the building blocks of life and the smallest units found in living organisms, this is demonstrated with diagrams of animal and plant cells. The scientist Robert Hooke is then introduced as someone who firstly coined the phrase ‘cell’ after observing plant tissue down a microscope, this leads into the main part of the lesson which is on microscopes. Students will be shown a diagram of a microscope and are told some details of factors which should be considered when observing a specimen using a microscope. A video is then played which students need to watch in order to complete a ‘fill-in-the-blank’ task which summarises how to use a microscope and the main parts of the structure of a microscope. This task can be self-assessed using the mark scheme provided. Once this task has been completed it can be self-assessed using the mark scheme provided. Next, students are shown how to calculate the total magnification of a microscope using the magnification of the objective lens and the eyepiece lens. Students will then need to work their way through a set of problems using this calculation. The answers to this task is included in the PowerPoint so students can mark and correct their work. The last part of the lesson requires pupils to follow the instructions included in the PowerPoint to prepare an onion slide to then observe plant cells under the microscope. Once students have carefully prepared their slide they should observe the plant cells at a range of magnifications, sketching a diagram of their observations onto the worksheet provided The plenary requires pupils to copy and complete sentences which summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Organic Chemistry’ SoW. Firstly, students asked to think about a question that oil companies face - what to do with longer chain hydrocarbons which are in less demand than smaller chain hydrcarbons? Pupils can share their ideas in pairs, then as a class, before being introduced to the process of cracking. Next, as a recap of the structure of alkanes pupils will need to use ‘Molymod’ kits to make the first four alkanes in the homologous series, they will also need to complete a table to identify the structural & displayed formulae for each. This work can be self-assessed using the mark scheme provided. Now pupils are introduced to the process and products of cracking, students will then be given a set of hydrocarbons which are being ‘cracked’ with one of the products identified, they will need to identify the other product and also determine if it would be an alkane or an alkene. Once complete, this work can be self-assessed using the mark scheme provided. The next part of the lesson focuses on the structure and properties of alkenes, students will firstly be given a set of facts about alkenes which they can take notes from. Next, students will watch a video about alkenes, they will be provided with a set of questions that they need to answer using this video. This work can be self-assessed using the answers provided. Using what they have learned in this video, the teacher will conduct a demonstration which tests four unknown substances with bromine water - pupils will need to record their results in a table and determine whether the unknown substances are alkenes or alkanes. Pupils will lastly complete a ‘Quick Check’ task, this is a set of questions which will summarise what pupils have learned during the lesson. They will be able to peer or self-assess their work using the answers provided. The plenary task is for pupils to sum up what they have learned this lesson in three sentences, using the list of key words provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is aimed at the new GCSE specification, on the topic of ‘Energy’. More lessons from this series can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils begin by considering what types of objects have a store of kinetic energy and then they can ‘Think, Pair, Share’ - what factors might affect how much kinetic energy an object actually has? The lesson then moves on to show pupils the calculation to work out kinetic energy, you can work through two model questions with pupils on the board. Pupils are then given a table where the calculation is broken down into sections. They are given the mass and the speed of an object, they will need to calculate 0.5 x mass in one column and the speed squared in another - from this they can calculate the kinetic energy. Once complete pupils can assess their work using a red pen. The next part of the lesson introduces how to rearrange the equation and then an activity follows with slightly harder calculations on kinetic energy, where they may be required to use the rearranged equation. Self-assessment of work when complete. **Higher ability students should now have a go at the past-paper question from the NEW AQA GCSE specimen material, they can complete the question and mark their work using the mark scheme provided** The plenary is game of ‘equation bingo’ - the students write 6 equations/words/phrases into their books, you describe their meaning and if students have the correct equation/word/phrase they can cross them out of their book. The first person to cross all of them out correctly can shout bingo! All resources are included in the PowerPoint - enjoy :)

This lesson is designed for the NEW AQA Biology GCSE, particularly for the higher tier for the 'Infection & Response ' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by students being introduced to how bacteria are grown and then students will watch a video on the growth of bacteria, they will need to answer questions and then will assess their work using the answers provided. Using the information learnt from the video pupils will then need to fill out a method sheet to describe how you safely grow microorganisms on agar plates. Pupils will then complete an exam-style question on what they have learnt so far as a mid-plenary and check their work. (Optional practical activity: Instructions are given for pupils to now complete the practical to start growing cultures of bacteria on agar plates.) The last half of the lesson will focus on mathematical skills related to working out the number of bacteria in a population. Pupils will watch a video to help them answer questions and then will need to complete questions by themselves, all answers are provided. The plenary task is for pupils to summarise what they have learnt this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P2 ’Sound’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly recap on the differences between a solid, liquid and gas. Students will need to identify the correct particle diagram from a selection. This then leads into a description of how a sound wave is made, students are asked to ‘Think > Pair > Share’ their ideas about what is meant by terms ‘vacuum’ and ‘medium’ - the answers can then be revealed on the PowerPoint for students to mark their work. Students will now watch a video of the ‘Bell Jar’ experiment, students will need to consider what is happening as they watch the video, they could try to write their ideas down in their books. An explanation of what they have observed can then be revealed using the PowerPoint. Students will now watch a video on the movement of sound waves through solids, liquids and gases. Whilst watching the video they will need to answer a set of questions, the mark scheme for this task is included in the PowerPoint for students to assess their work once it is complete. This is followed by a worksheet of questions, the answers to this is also included in the PowerPoint for students to self-assess their work. Students will then complete a progress check task, this is a copy-and-complete task which summarises what they have learned this lesson. This task can then be marked and corrected using the answers provided. Lastly, students will be asked to consider which travels faster - light or sound. They will need to think about evidence to support their ideas. The answers can then be revealed - light is faster than sound, with evidence such as you see lightening before you hear thunder, also when a starting pistol is used you see the smoke before you hear the bang. The plenary activity requires students to write down three facts, three key words and one question to test their peers knowledge of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be introduced to carbon as being one of the main constituents of life, as it is present within many molecules inside the human body - DNA, carbohydrates, fats & proteins. Students will also be introduced to the idea of ‘carbon sinks’. Students will now watch a video on the carbon cycle, students will need to answer a set of questions whilst watching this video. This task can then be self-assessed using the mark scheme provided. Next, students will be given a ‘fill-in-the-blank’ task to complete using the key words provided on the PowerPoint presenation. Students can self-assess their work using the mark scheme provided once this task is complete. Next, students will watch another video on the processes involved in the Carbon Cycle. Whilst watching this video they will be given a number of captions, which they will need to use in oder to fill in blanks on a worksheet. This task can be self-assessed using the mark scheme provided, once it is complete. Lastly, students will be given a series of pictures and words/descriptions which they need to use in order to construct their own poster of the carbon cycle, they will need to add arrows to demonstrate where the carbon is moving from and to. This task can be self-assessed using the mark scheme provided on the PowerPoint presentation. The final task requires students to read of piece of information, using this they should discuss and write down some changes that we could implement at home, and on a national scale, to help reduce our carbon emissions. The plenary is a ‘pick a plenary’ task, students will either choose to write down a summary of what they have learned this lesson in three sentences, or they may choose to write definitions for a set of key words that are provided. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Chemistry GCSE, particularly the ‘Atomic Structure & Periodic Table’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson starts with a video about Mendeleev and the development of the periodic table, pupisl should answer questions alongside watching this video. After this work has been self-assessed pupils will be given an information sheet in pairs, this can be tag read as a class for lower ability pupils. Using this information pupils will need to answer a set of questions, they can complete these tasks in their book and once finished this work can be self-assessed using the answers provided. The next part of the lesson focuses on metals vs. non-metals, pupils will be introduced to the idea that the periodic table is split into two groups and will then need to use a poster activity to summarise the differences in properties between these two groups. Once this work has been self-assessed, pupils will then be given another set of information about different types of metals and pupils will use this information to complete a worksheet. The plenary activity is a an exit card where pupils will need to summarise what they have learnt by writing down three key words, one fact and one question on a piece of paper which can be handed to the teacher as they leave. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This resources is designed for the OCR Biology GCSE, particularly the ‘B3 - Organism-Level Systems’ scheme of work. This lesson begins with a recap on the structures and function of the endocrine system, it then moves on to look at the positions of the different glands involved in the endocrine system. Pupils are shown an image of a human body (also can be given as a worksheet) and should discuss in pairs which glands fall into which position on the diagram. After the answers have been revealed, and are then assessed, pupils will now need to discuss the function of each of the glands. From a list of descriptions, pupils should try and match the name of the gland to the hormone it produces, this work can then be self-assessed. In the next activity pupils are required to draw a table and then in groups/per table they are given a set of cards which they then need to sort into the correct spaces on their table to summarise the main role of the hormones secreted by 5 glands - the pituitary, the thyroid, the pancreas, the ovaries and the testes. This work can then be assessed using the answers provided. Pupils can then complete a ‘silent 5’ set of questions on the topic they have covered so far, they should try and complete the questions on their own but for lower ability groups they may want to try discuss in pairs before answering. The final activity is an exam paper question on hormone levels, once completed pupils can use the mark scheme to mark their own work. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Organisation’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Infection & Response’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 8 B2.1 Module on ‘Ecosystem Processes’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 8 B2.1 Module on ‘Health & Lifestyle’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 C1.3 For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 C1.1 Module on ‘Particles & Their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 P1.4 Module on ‘Space’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Inheritance, variation & evolution’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 8 B2.1 Module on ‘Reactions with Metals’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)