This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW, it contains some higher-tier only content. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson firstly begins with a description and definition for gene expression in a cell, this leads onto introduce the idea of a mutation. Pupils are given a definition of a mutation and are asked to consider whether mutations are always negative effects. This leads onto show the ways in which a mutation can affect a protein/enzyme in the body and the effect that could have on the function of body processes. Next is a quick check-silent 5 activity to assess students knowledge of gene expression and mutation, pupils can answer the questions in their book and mark their work using the answers provided. There is on further activity on mutations, pupils will watch a video on sickle cell anaemia and answer questions in their books. The next section of the lesson is on inheritance, firstly pupils are introduced to the idea of alleles and are shown the genotypes of three rabbits with either black or white fur colour to show that it is the combination of alleles that determines this characteristic. Pupils are asked to complete some questions based on what they have learnt so far, which can be assessed using the answers provided. Next pupils are introduced to the difference between genotype and phenotype, homozygous and heterozygous genotypes. Pupils will then be given a set of images and are asked to identify whether these images are representing a genotype or phenotype, if it is a genotype they are asked to determine if it is homozygous or heterozygous. This work can then be assessed. Pupils are now shown how to construct a genetic diagram using a worked example, they are then given another genetic cross for which they need to construct their own genetic diagram and work out the percentage of each offspring that would be present, this work can be self-assessed. The final task is on sex determination, pupils are introduced to the idea of X & Y chromosomes and are shown the combinations needed to produce a male or a female. Pupils will need to construct their own genetic diagram to show the percentage chance of a baby being male or female. This topic can also be assessed using an exam-style questions for higher ability pupils. The plenary activity is for pupils to write a glossary in the back of their books for any new key words they have learnt this lesson All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a description of the new field of nanoscience and the types of industries where this may be important. Pupils are then given a set of questions which they must complete using a video, once the students have answered the questions they can assess their work using the mark scheme provided. Pupils will now focus on the importance of surface are to volume ratio when considering nanoparticles, students will calculate the surface area to volume ratio of a cube that is 100cm x 100cm, 10cm x 10cm and 1cm x 1cm. By doing this they can see that the smaller the particle the higher the surface area to volume ratio, this is an important property in nanoparticles - particularly for their use as catalysts. Students are then asked to prove that the same applies for a cube that is 10m x 10m and 0.1cm x 0.1cm. All work from these tasks can be self or peer assessed using the answers provided in the PowerPoint presentation. The next part of the lesson is a task for pupils to consider the application of nanotechnology, pupils will each be given a card of information describing one application of nanoparticles. They will need to walk around the room and discuss the applications with each other to complete a table in their books. The last task is for pupils to consider the potential risks involved with the uses of nanoparticles in everyday products, students should think > pair > share their ideas about how the industries using nanoparticles might be posing risks to people and the environment. Once the class has discussed these potential risks you can outline some examples using the PowerPoint presentation. The plenary is for pupils to pick a task, either write a twitter message or summarise what they learnt in the lesson in three sentences. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a definition on biodiversity, pupils are shown a pie chart of the numbers of different groups of organisms that have been identified to date. The first task is for pupils to consider which numbers correspond to which groups of organisms. Once pupils have discussed in pairs or groups the answers will be revealed, pupils can check their work against the answers provided. The next part of the lesson focuses on how and why scientists quantify biodiversity, pupils are firstly asked why it might be important to map out biodiversity - they can discuss in groups before the answer is revealed on the PowerPoint presentation. A map of the world depicting certain biodiversity hotspots is then shown to students and they are asked a couple of question about this map, pupils will be required to answer these questions in their books and then self-assess their work using the answers provided. Pupils are then asked to think > pair > share their ideas on why it is important to maintain biodiversity, in groups pupils may be given an A3 sheet for them to mind map their ideas onto. Once finished each group can feedback their ideas to the class and a larger mind map could be completed on the white board. Some of the key reasons for maintaining biodiversity cant then be detailed on the PowerPoint presentation for students to assess their work. The last task is for pupils to use information posters placed around the room to answer a set of questions, all on the topic of maintaining biodiversity. Once pupils have spent a good amount of time writing their answers down they should sit in their seats and use the mark scheme provided on the PowerPoint presentation to peer-assess their work. The plenary activity is for pupils to draw a feedback grid in their partners books and write down one positive comment, one negative comment and a question to test their knowledge. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Biology GCSE, particularly the 'Infection & Response' SoW for the higher tier. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first part of this lesson is a recap on the plant diseases students should have already covered within the 'infection & response' unit - rose black stop and tobacco mosaic virus. Plants will then be asked to come up with a brainstorm of the symptoms plants may exhibit when they are diseased. Once pupils have discussed this and tried to come up with some ideas you can reveal some of the common symptoms on the PowerPoint slide, along with images and examples. The next slide looks at the ways in which plant diseases can be diagnosed, from gardening manuals to monoclonal antibody testing kits. The next activity focuses on the role of certain minerals in the growth and development of plants, firstly students will draw a table in their book and then they will given a slip of information about one of the mineral ions - nitrates, magnesium or potassium. Pupils will need to walk around the room or swap these slips of paper with people on the same table as them to complete the table, they can then assess their work. The final part of the lesson focuses on plant defence responses, firstly pupils will be shown some diagrams of plants and their defence methods and will be asked to think > pair > share the potential ways plants can defend against disease. Pupils will then be given a card sort with different plant defence mechanisms, students need to sort these into three different categories - physical barrier, chemical barrier, defence against herbivore. Once completed pupils can then assess their work using the answers provided. The final task is an exam-style question on what they have learnt that lesson, pupils of higher ability may want to complete these questions in silence at the backs of their book. Pupils can then self or peer-assess their work. Plenary activity is to write 3 key words, 2 facts and 1 question about what pupils have learnt that lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy. The lesson begins with an introduction to the law of the conservation of energy, students are told that energy cannot be created or destroyed but it can be stored and transferred. Next, students are introduced to the five main energy stores, students are asked to match the correct names to the photos displayed. This task can then be self-assessed using the mark scheme provided. Next, students are introduced to the ways in which energy can be transferred - via light waves, sound waves and electricity. They will be shown an energy transfer diagram, depicting the energy transfers which take place within a torch. Once students have seen the complete diagram, they will then have a go at completing it themselves, using the statements provided. This task can the be marked against the mark scheme provided. Students will then complete two further energy diagrams to display the energy transfers taking place within a candle and TV. The answers to this task are also included in the PowerPoint presentation so students can self-assess their work using the mark scheme provided. Lastly, students will complete an investigation into the height a ball bounces back up to after it has been dropped from a height. Students will work in groups of three, following the instructions provided on the PowerPoint to complete the results table provided. Students will then need to answer a set of questions using the data they collected from the investigation. This can be self-assessed using the mark scheme provided. The plenary task requires students to complete one of the sentence starters, to summarise what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first task is for pupils to think > pair > share the factors which may cause a contribution of carbon dioxide into our atmosphere. Pupils can create a mind map in their books and then discuss their ideas as a table and then as a class. The next PowerPoint slide reveals some of the main factors which contribute to an increase in carbon dioxide levels in our atmosphere, pupils can check their work against these answers. For the next task pupils will be required to watch a video about the greenhouse effect and answer questions in their books, this task can be self-assessed using the answers provided once complete. Using this information pupils will then be asked to fill in the blanks on a diagram depicting the greenhouse effect, pupils will be given captions to write into the correct boxes on their worksheet. This can be self-assessed once it has been completed. Next pupils will be given a set of data on the mean world temperature change from 1960 to present day, students will be required to plot the data on a graph, describe the pattern of the graph and explain why the graph may be showing this pattern. The next part of the lesson focuses on global warming, students will firstly be given a set of questions which they will need to answer whilst watching a video. This work can then be self-assessed using the answers provided. For the very last task pupils will be given a card of information each detailing an environmental factor and it’s impact on living organisms. Pupils will need to wander around the room and share information with each other to complete their table of environmental factors. The plenary task is for pupils to identify what the questions might be for a set of answers provided on the PowerPoint presentation. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Forces in Action’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with an introduction to force diagrams, students are given some information about how arrows can show the direction and size of forces acting upon an object. Students will then need to add force arrows to a diagram of a brick falling, this task can then be checked against the answer provided. Students are now shown a ‘Tug of war’ diagram, students are asked to ‘Think > Pair > Share’ their ideas about which side would win and why. After a short class discussion, students are now introduced to the idea of balanced and unbalanced forces, using ‘tug of war’ images as examples. Students are then given some information outlining how the motion of an object is affected by balanced/unbalanced forces acting upon it. Students will now complete a forces circuit to consider the type and size of forces acting upon different objects in the circus, students will need to identify the type/size of the forces and decide whether they are balanced or unbalanced. This task can be self-assessed once it is complete. Students will now be introduced to the definition of resultant forces, and will be shown some examples of how to calculate resultant force using ‘tug of war’ examples again. Students will now complete a couple of tasks to assess their knowledge of what they have learned so far on resultant forces, both tasks can be self-assessed using the mark scheme provided in the PowerPoint presentation. Lastly, students are shown how to draw ‘Free-body Force Diagrams’, an example is given before students are asked to draw their own onces using the two scenarios provided. The work can be marked and corrected using the mark scheme provided. The plenary task requires students to write a Whatsapp message to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Organisation’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by pupils given a bit of information about the tissues which make up the lining of the stomach. They will need to read this information in pairs and then answer questions in their book, once completed the pupils can self or peer-assess their work using the answers provided on the next slide. Pupils will then be introduced to the digestive system, it’s role and the organs involved with this system. They should be able to remember some information from previous lessons on organ systems (see ‘Principles of organisation’ in my shop!). Now, pupils must read through another card of information in pairs and complete tasks on the board, these tasks will require pupils to label a diagram of a human body to show the locations of the major organ systems and also describe the function of these organs. The next task is a video which pupils will watch and answer questions, list of questions is provided as a worksheet. Pupils will then self-assess their work using the answers provided after the video has finished. The final activity is an exam-style question, pupils will answer this on the sheet and then mark their work using the mark scheme. The plenary task is a word search challenge, there are 10 words associated with digestion in the word search. Pupils will race to complete against each other to complete the word search. You can award a prize if you have any :) All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Bioenergetics’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Firstly pupils are asked to consider why organisms may not be able to continuously carry out aerobic respiration. They can discuss in pairs and then as a class and be introduced to the idea of anaerobic respiration. They will fill then complete a fill-in-the-blank task to sum up this process. Pupils will then watch a video where they will answer questions about anaerobic respiration, their answers can be checked against the mark scheme provided. Now pupils are introduced to the idea of oxygen debt, they are given an information card in pairs (for lower ability classes you may want to tag read this as a class) and then pupils will need to answer questions about this information. They can talk about in partners, once finished they can self or peer assess their work. Finally the different products of anaerobic respiration that are made in different organisms are highlighted, it is touched upon in the video but this is clear slide to show anaerobic respiration in plants, bacteria and yeast. Pupils will complete some exam-style questions to assess their knowledge of this topic, can be answered in the back of their books to fully test them! Pupils can then mark their own work using the mark scheme provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Infection & Response’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson firstly begins by looking at what monoclonal antibodies are and how they are produced, using a flow diagram the first slide goes through these details. The next slide is the images from the flow diagram but no description of what is happening, pupils need to match the statements to the correct part of the process. This can then be assessed. The next part of the lesson focuses on the uses of monoclonal antibodies, firstly pupils are given a set of questions about pregnancy tests which they will need to answer using a video. This can then be assessed using the answers provided. Pupils are then given a table/asked to draw a table in their book for the different uses of monoclonal antibodies. Pupils will then need to use posters which can be positioned around the room or on desks to fill this table in. The final activity is a card sort - pupils are given statements about the uses of monoclonal antibodies which are either advantages or disadvantages, pupils will need to write these statements into the correct column in their books. Once finished they can self-assess their work using the answers provided. The plenary activity is for pupils to choose two questions to answer from a list about the topic of the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW for the higher tier, biology only specification. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will firstly be given, in pairs, information about Lamarck’s and Darwin’s theories of evolution. In pairs students will need to explain each theory to each other and discuss the merits and downfalls of each. The next task required pupils to summarise the main points of each of the scientists theories in a table, this work can be self-assessed against the answers provided. Pupils will then be asked to consider the flaws in Lamarck’s theory, pupils will be asked to come up with a question to ask Lamarck about his theory and to discuss in pairs what they think the potential flaws of this theory could be. Once you have gone through pupils’ ideas as a class you can reveal some of the problems with this theory of evolution. The next part of the lesson focuses on Darwin, firstly pupils will be asked to copy and complete sentences to summarise the main ideas from Darwin’s theory of evolution. Once this task is completed and marked, pupils will go on to look at why Darwin’s ideas were not published or accepted straight away. Pupils will be provided with some information but they will also need to use their own knowledge to answer a set of questions provided on a worksheet. Once this task is complete, a detailed mark scheme has been provided for pupils to either self or peer assess their work. The very last task is an exam-style question, pupils will need to complete this in their books (at the back of books without notes for a stretch and challenge) and self or peer-assess using the mark scheme once they have finished. The plenary task is for pupils to summarise what they have learnt in the lesson using the key words provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW and for higher tier students. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a recap of normal body temperature and what happens if the temperature falls above or below this temperature. Pupils will also be introduced to the role of the thermoregulatory centre and thermoregulatory receptors in monitoring body temperature. Pupils are then asked to discuss and produce a list of mechanisms that helps the body to cool down on a hot day. This leads onto describe the role of sweating and vasodilation in cooling the body down. Pupils are then asked to consider what they think might happen if the body becomes too cold and again produce a list of mechanisms which might help warm it up. Using the PowerPoint slides the mechanisms of shivering and vasoconstriction will be demonstrated to pupils. Using this information pupils will need to copy and complete a flow diagram to demonstrate the role of thermoregulatory centre in controlling body temperature, this can be self-assessed once it has been completed. Pupils will now copy and label a diagram of the skin to show the position of sweat glands, hair, hair muscle and blood vessels, this can be marked once it has been completed. The next activity is for pupils to sort statements into two columns - one describing what happens when the body is too hot and one for when the body is too cold. Once completed the mark scheme can be used by pupils to self or peer-assess their work. The final activity is a 6-mark exam-style question on this topic, pupils should try and complete this in silence and at the back of their books to really test their knowledge of this topic. Once complete the mark scheme can be used for pupils to mark their own work. The plenary task is for pupils to pick a summary question of their choice from the two provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Forces in Action’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a ‘Think > Pair > Share’ task, students are asked to consider the question ‘What is a force?’. Students will be given a few minutes to discuss in pairs, before feeding back to the class before the answer is revealed. Forces can be described as ‘contact’ or ‘non-contact’, students are asked to discuss what they think the differences between these types of forces are. After a short class discussion, the definition for each is revealed to students, they can make a note of this in their books. Next, students will be provided with a list (and diagrams) of different forces , they will need to sort into either contact or non-contact forces. This task can be self-assessed once it is complete. Next, students are introduced to Newton’s Third Law of Motion, when two objects interact with each other, they exert equal and opposite forces on each other. Students will then watch a video to demonstrate the principles of this law, students will answer a set of questions whilst doing so. Once complete, students can self-assess their work using the mark scheme provided. Next, students are provided with a further example of this law which they can take notes on their books. After this, students will complete a ‘quick check’ task to assess their knowledge of what they have learned so far this lesson. This work can then be marked and corrected using the answers provided on the PowerPoint presentation. Lastly, students complete a ‘fill-in-the-blank’ task to summarise what they have learned this lesson, this can be self-assessed using the mark scheme provided. The plenary task requires students to write down three facts, three key words and one question to test their peers on what they have learned so far this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA GCSE Trilogy Chemistry GCSE, particularly the ‘Using our Resources’ scheme of work.

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the three main acids and their chemical formulae - nitric acid, hydrochloric acid and sulphuric acid - students are asked to identify what the three compounds have in common. Students should hopefully identify that they are contain hydrogen atoms. This then leads onto the next slide where students are introduced to the idea of a salt - the compound which forms when an acid and a metal react together. Students are given some information about this reaction and about salts, using this information students will need to answer some questions. Once this task has been completed, students can self-assess their work using the mark scheme provided. Students will then watch a video of a metal reacting with an acid, whilst students watch this video they are asked to write down any observations they make about the reaction, as well as think about what is happening that we can’t see/hear/feel. Students are now shown the word equation for magnesium metal reacting with hydrochloric acid and zinc metal reacting with hydrochloric acid, students are asked to think about the pattern with the products formed from these reactions. Hopefully, students can identify that a salt + hydrogen is formed in each one. Students are now asked to copy and complete a set of word equations for several more metal + acid reactions. This work can be self-assessed once complete. Next, students will conduct an investigation into how different metals react differently with acids. Students will test five metals - copper, iron, zinc, lead and magnesium - with hydrochloric acid. Hopefully, by completing this investigation they will be able to successfully place the metals in order of reactivity, this can be checked using the answers provided on the PowerPoint. Lastly, students need to be able to describe the test for hydrogen gas. Students will firstly be asked to ‘Think > Pair >Share’ their ideas about how this may be carried out, before watching a video to check whether their ideas were correct. Students can then make a note of this test in their books. The plenary task requires students to write a list of key words which were learned in the lesson today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a definition of homeostasis and pupils will then need to discuss in pairs the conditions that they think need to be controlled by the body. This leads on to revealing these factors and looking specifically at the way in which water can be lost and gained by the body. Pupils the complete a couple of questions on the topic. Next is a focus on temperature control in the body, pupils need to consider what might happen if the temperature rises too high or falls too low and come up with ideas about how this might affect the body. Having already covered enzymes hopefully they might have some clue about what might happen. You can reveal the answer and pupils then need to complete a small worksheet to summarise these ideas. Next pupils are challenged to think about what parts of our body control our reactions, pupils are asked to complete a challenge which gets them thinking about coordination and they will then write down any organs they think were involved with this process. The nervous and endocrine system are then introduced, pupils will need to copy and complete summary sentences to describe the main structures and functions of these two systems in controlling the body. Pupils will then complete an exam question on the differences between nervous and endocrine control, the mark scheme is provided for pupils to mark their work. Finally pupils look at the role of negative feedback in the body and how this works with the example of temperature control. Pupils will need to sketch a simple graph into their books and use labels provided to demonstrate how this process occurs. Again, the finished diagram is included so pupils can assess their own work. A plenary activity is to complete an exit card listing key words, facts and to pose a question about the work covered in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)