Some resources require specialist files that can not be uploaded (2D Design), please contact me direct for these by email - craigjohnscott1@outlook.com
Some resources require specialist files that can not be uploaded (2D Design), please contact me direct for these by email - craigjohnscott1@outlook.com
I am developing a full range of theory lessons to support the new AQA design technology GCSE 9-1. There are 30 lessons that are taught one a week throughout Y10.
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
To support the theory lessons I have uploaded, please download my pupil tracker sheet.
As well as theory lessons I have uploaded project/skills learning journeys that can be easily customised to the projects you are delivering.
All content is fully branded and is graphically consistent.
Please check out my other resources and give feedback if you find my resources helpful.
If there are any missing video links, please contact me and I will send.
Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson).
Please see my extensive range of other supporting resources.
I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below).
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package.
1 Properties
2 Metals
3 Woods and Boards
4 Seasoning and Conversion
5 Cutting
6 Drilling
7 Polymers
8 Composites
9 Papers and Boards
10 Orthographic Drawing
11 Isometric/Perspective
12 Types of Movement
13 Levers
14 Linkages and Cams
15 Gear Trains
16 Pulleys and Belts
17 Programmable Systems 1
18 Programmable Systems 2
19 Programmable Systems 3
20 Textiles
21 Marcel Breuer
22 Philippe Starck
23 Stock Forms
24 Chiselling, Planing, Turning
25 Flat Pack Furniture,
26 Wood Finishes
27 Quality Manufacture
28 Commercial Routing and Turning
29 Scales of Production
30 Smart, Modern Materials
31 Design Strategies
32 Dyson - Prototype Development
33 Apple - Recycling and Disassembly
34 Industry
35 Enterprise
36 Production Techniques
37 Design Decisions
38 Sustainability
39 Energy Generation and Storage
40 Exam Preparation
I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below).
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package.
1 Properties
2 Metals
3 Woods and Boards
4 Seasoning and Conversion
5 Cutting
6 Drilling
7 Polymers
8 Composites
9 Papers and Boards
10 Orthographic Drawing
11 Isometric/Perspective
12 Types of Movement
13 Levers
14 Linkages and Cams
15 Gear Trains
16 Pulleys and Belts
17 Programmable Systems 1
18 Programmable Systems 2
19 Programmable Systems 3
20 Textiles
21 Marcel Breuer
22 Philippe Starck
23 Stock Forms
24 Chiselling, Planing, Turning
25 Flat Pack Furniture,
26 Wood Finishes
27 Quality Manufacture
28 Commercial Routing and Turning
29 Scales of Production
30 Smart, Modern Materials
31 Design Strategies
32 Dyson - Prototype Development
33 Apple - Recycling and Disassembly
34 Industry
35 Enterprise
36 Production Techniques
37 Design Decisions
38 Sustainability
39 Energy Generation and Storage
40 Exam Preparation
I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below).
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package.
1 Properties
2 Metals
3 Woods and Boards
4 Seasoning and Conversion
5 Cutting
6 Drilling
7 Polymers
8 Composites
9 Papers and Boards
10 Orthographic Drawing
11 Isometric/Perspective
12 Types of Movement
13 Levers
14 Linkages and Cams
15 Gear Trains
16 Pulleys and Belts
17 Programmable Systems 1
18 Programmable Systems 2
19 Programmable Systems 3
20 Textiles
21 Marcel Breuer
22 Philippe Starck
23 Stock Forms
24 Chiselling, Planing, Turning
25 Flat Pack Furniture,
26 Wood Finishes
27 Quality Manufacture
28 Commercial Routing and Turning
29 Scales of Production
30 Smart, Modern Materials
31 Design Strategies
32 Dyson - Prototype Development
33 Apple - Recycling and Disassembly
34 Industry
35 Enterprise
36 Production Techniques
37 Design Decisions
38 Sustainability
39 Energy Generation and Storage
40 Exam Preparation
I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below).
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package.
1 Properties
2 Metals
3 Woods and Boards
4 Seasoning and Conversion
5 Cutting
6 Drilling
7 Polymers
8 Composites
9 Papers and Boards
10 Orthographic Drawing
11 Isometric/Perspective
12 Types of Movement
13 Levers
14 Linkages and Cams
15 Gear Trains
16 Pulleys and Belts
17 Programmable Systems 1
18 Programmable Systems 2
19 Programmable Systems 3
20 Textiles
21 Marcel Breuer
22 Philippe Starck
23 Stock Forms
24 Chiselling, Planing, Turning
25 Flat Pack Furniture,
26 Wood Finishes
27 Quality Manufacture
28 Commercial Routing and Turning
29 Scales of Production
30 Smart, Modern Materials
31 Design Strategies
32 Dyson - Prototype Development
33 Apple - Recycling and Disassembly
34 Industry
35 Enterprise
36 Production Techniques
37 Design Decisions
38 Sustainability
39 Energy Generation and Storage
40 Exam Preparation
I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below).
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package.
1 Properties
2 Metals
3 Woods and Boards
4 Seasoning and Conversion
5 Cutting
6 Drilling
7 Polymers
8 Composites
9 Papers and Boards
10 Orthographic Drawing
11 Isometric/Perspective
12 Types of Movement
13 Levers
14 Linkages and Cams
15 Gear Trains
16 Pulleys and Belts
17 Programmable Systems 1
18 Programmable Systems 2
19 Programmable Systems 3
20 Textiles
21 Marcel Breuer
22 Philippe Starck
23 Stock Forms
24 Chiselling, Planing, Turning
25 Flat Pack Furniture,
26 Wood Finishes
27 Quality Manufacture
28 Commercial Routing and Turning
29 Scales of Production
30 Smart, Modern Materials
31 Design Strategies
32 Dyson - Prototype Development
33 Apple - Recycling and Disassembly
34 Industry
35 Enterprise
36 Production Techniques
37 Design Decisions
38 Sustainability
39 Energy Generation and Storage
40 Exam Preparation
I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below).
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package.
1 Properties
2 Metals
3 Woods and Boards
4 Seasoning and Conversion
5 Cutting
6 Drilling
7 Polymers
8 Composites
9 Papers and Boards
10 Orthographic Drawing
11 Isometric/Perspective
12 Types of Movement
13 Levers
14 Linkages and Cams
15 Gear Trains
16 Pulleys and Belts
17 Programmable Systems 1
18 Programmable Systems 2
19 Programmable Systems 3
20 Textiles
21 Marcel Breuer
22 Philippe Starck
23 Stock Forms
24 Chiselling, Planing, Turning
25 Flat Pack Furniture,
26 Wood Finishes
27 Quality Manufacture
28 Commercial Routing and Turning
29 Scales of Production
30 Smart, Modern Materials
31 Design Strategies
32 Dyson - Prototype Development
33 Apple - Recycling and Disassembly
34 Industry
35 Enterprise
36 Production Techniques
37 Design Decisions
38 Sustainability
39 Energy Generation and Storage
40 Exam Preparation
Complete starter pack for delivery of the AQA NEA. Included is a launch lesson which is slightly Graphics biased but can be easily modified to your own requirements, a complete set of lesson plans and student template to guide them through the delivery. A set of starter tasks that can be used to refresh theory knowledge during the NEA and a tracker sheet to allow pupils to recieve feedback and improve their work.
I am developing a full range of theory lessons to support the new AQA design technology GCSE starting in 2017. There are 30 lessons that are taught 1 a week throughout Y10.
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
To support the theory lessons I have uploaded, please download my pupil tracker sheet.
As well as theory lessons I have uploaded project/skills learning journeys that can be easily customised to the projects you are delivering.
All content is fully branded and is graphically consistent.
Please check out my other resources and give feedback if you find my resources helpful.
If there are any missing video links, please contact me and I will send.
I am developing a full range of theory lessons to support the new AQA design technology GCSE starting in 2017. There are 30 lessons that are taught 1 a week throughout Y10.
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
To support the theory lessons I have uploaded, please download my pupil tracker sheet.
As well as theory lessons I have uploaded project/skills learning journeys that can be easily customised to the projects you are delivering.
All content is fully branded and is graphically consistent.
Please check out my other resources and give feedback if you find my resources helpful.
If there are any missing video links, please contact me and I will send.
This is a PowerPoint that contains 55 starter/bell tasks. It has been designed to be delivered alongside the new AQA DT GSCE. One can be selected each lesson to support/refresh understanding of theory topics that have already been covered in Y10.
I also have a full NEA template available and complete scheme of work/lesson plans to cover the 55 lesson project.
Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson).
Please see my extensive range of other supporting resources.
I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below).
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package.
1 Properties
2 Metals
3 Woods and Boards
4 Seasoning and Conversion
5 Cutting
6 Drilling
7 Polymers
8 Composites
9 Papers and Boards
10 Orthographic Drawing
11 Isometric/Perspective
12 Types of Movement
13 Levers
14 Linkages and Cams
15 Gear Trains
16 Pulleys and Belts
17 Programmable Systems 1
18 Programmable Systems 2
19 Programmable Systems 3
20 Textiles
21 Marcel Breuer
22 Philippe Starck
23 Stock Forms
24 Chiselling, Planing, Turning
25 Flat Pack Furniture,
26 Wood Finishes
27 Quality Manufacture
28 Commercial Routing and Turning
29 Scales of Production
30 Smart, Modern Materials
31 Design Strategies
32 Dyson - Prototype Development
33 Apple - Recycling and Disassembly
34 Industry
35 Enterprise
36 Production Techniques
37 Design Decisions
38 Sustainability
39 Energy Generation and Storage
40 Exam Preparation
I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below).
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package.
1 Properties
2 Metals
3 Woods and Boards
4 Seasoning and Conversion
5 Cutting
6 Drilling
7 Polymers
8 Composites
9 Papers and Boards
10 Orthographic Drawing
11 Isometric/Perspective
12 Types of Movement
13 Levers
14 Linkages and Cams
15 Gear Trains
16 Pulleys and Belts
17 Programmable Systems 1
18 Programmable Systems 2
19 Programmable Systems 3
20 Textiles
21 Marcel Breuer
22 Philippe Starck
23 Stock Forms
24 Chiselling, Planing, Turning
25 Flat Pack Furniture,
26 Wood Finishes
27 Quality Manufacture
28 Commercial Routing and Turning
29 Scales of Production
30 Smart, Modern Materials
31 Design Strategies
32 Dyson - Prototype Development
33 Apple - Recycling and Disassembly
34 Industry
35 Enterprise
36 Production Techniques
37 Design Decisions
38 Sustainability
39 Energy Generation and Storage
40 Exam Preparation
I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below).
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package.
1 Properties
2 Metals
3 Woods and Boards
4 Seasoning and Conversion
5 Cutting
6 Drilling
7 Polymers
8 Composites
9 Papers and Boards
10 Orthographic Drawing
11 Isometric/Perspective
12 Types of Movement
13 Levers
14 Linkages and Cams
15 Gear Trains
16 Pulleys and Belts
17 Programmable Systems 1
18 Programmable Systems 2
19 Programmable Systems 3
20 Textiles
21 Marcel Breuer
22 Philippe Starck
23 Stock Forms
24 Chiselling, Planing, Turning
25 Flat Pack Furniture,
26 Wood Finishes
27 Quality Manufacture
28 Commercial Routing and Turning
29 Scales of Production
30 Smart, Modern Materials
31 Design Strategies
32 Dyson - Prototype Development
33 Apple - Recycling and Disassembly
34 Industry
35 Enterprise
36 Production Techniques
37 Design Decisions
38 Sustainability
39 Energy Generation and Storage
40 Exam Preparation
I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below).
Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section.
As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package.
1 Properties
2 Metals
3 Woods and Boards
4 Seasoning and Conversion
5 Cutting
6 Drilling
7 Polymers
8 Composites
9 Papers and Boards
10 Orthographic Drawing
11 Isometric/Perspective
12 Types of Movement
13 Levers
14 Linkages and Cams
15 Gear Trains
16 Pulleys and Belts
17 Programmable Systems 1
18 Programmable Systems 2
19 Programmable Systems 3
20 Textiles
21 Marcel Breuer
22 Philippe Starck
23 Stock Forms
24 Chiselling, Planing, Turning
25 Flat Pack Furniture,
26 Wood Finishes
27 Quality Manufacture
28 Commercial Routing and Turning
29 Scales of Production
30 Smart, Modern Materials
31 Design Strategies
32 Dyson - Prototype Development
33 Apple - Recycling and Disassembly
34 Industry
35 Enterprise
36 Production Techniques
37 Design Decisions
38 Sustainability
39 Energy Generation and Storage
40 Exam Preparation