This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the Periodic Table, students will be shown a diagram of the Periodic Table and will be asked to identify whether they think certain elements are metals or non-metals, or even semi-metals (metalloids). This task can the be checked and assessed against the answers provided on the PowerPoint. Next, students will be given part of a table of information on the properties of metals compared to non-metals. They will need to walk around the room and trade information with others in order to successfully complete their own table. Once this task has been completed, students can self-assess their work using the mark scheme provided. Students are now shown a diagram of an iron roof and a copper roof and how this can change over time, students are asked to think about what is happening in these picture & try to identify the chemical reaction. After a short class discussion, the answers to the questions will then be revealed. Students will then be told that non-metals react in a similar way with oxygen, they will then be shown 4 incomplete word equations for the reaction of different non-metals with oxygen. Students will need to complete this equation, this task can the self-assessed using the mark scheme provided. The last activity is a true or false activity, students will need to identify whether the statements about metals/non-metals are true or false. This task can the be marked using the mark scheme provided. The plenary task is an exit card, students will need to write down three key words, one fact and a question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students are firstly introduced to collision theory, outlining the conditions which need to be in place in order for a chemical reaction to occur. Next students are asked to ‘Think, Pair, Share’ factors which they think may affect the rate of a reaction, once students have had chance to discuss this they are introduced to the four main factors which they study within this topic. Firstly, the lesson will focus on surface area, this factor is explained using apple slices turning brown as an example, students are then introduced to the relationship between surface area to volume ratio and the rate of reaction. Students will then need to complete a worksheet of surface area to volume ration calculations, this can then be self-assessed using the mark scheme available. Students will now work through a set of levelled questions looking at data on the effect of surface area on the rate of reaction, this work can be self-assessed using the mark scheme provided in the PowerPoint presentation. The next part of the lesson will focus on the effect of temperature on the rate of reaction, students will firstly need to answer questions whilst watching a video, this work can then be self-assessed using the mark scheme. Next, students will carry out an investigation into the effect of temperature on the rate of reaction between sodium thisulphate and hydrochloric acid. Students will need to collect data and use this to work out the rate of reaction at different temperatures, a worksheet is provided for this task. The last task is for pupils to complete a ‘Quick Check’ set of questions in order to assess what they have learned this lesson, students can then either peer-assess or self-assess their work using the mark scheme provided. The plenary task is for pupils to write a twitter message about what they have learned this lesson, included a hashtag of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Resources’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with an introduction to a Life Cycle Assessment, what it is, how it is carried out and the reasons behind conducting them. Next, pupils will watch a video on the process and importance of carrying out an LCA - pupils can answer a set of questions whilst watching this and when finished they can self-assess their work using the mark scheme provided. Pupils are then shown a diagram which outlines the input and output of an LCA, including all of the processes which occur in between. Pupils will now consider the overall environmental impact of the production of a paper bag compared to the production of a carrier bag. Pupils can discuss their ideas of which may make the larger impact on the environment. Next, pupils will be given a set of information about the extraction of raw materials, manufacture, use and reuse and disposal of these two bags - using this information they will need to conduct an LCA for each bag. To do this they have been provided with a table to fill in, for each factor they will need to score the environmental impact from 1-10. At the end they will have a score out of 40, the higher the score the larger the environmental impact. The last part of the lesson requires pupils to consider the problems of conducting a life cycle assessment, they can mind map their ideas as a pair and then share as part of a class discussion. The teacher can then reveal some of the issues with LCA’s, pupils can check their work against these answers. The plenary task is for pupils to write three quiz questions to test their peers knowledge of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please email me at swift.education.uk@gmail.com and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Rates of Reaction’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with an introduction to reversible reactions, including the example of thermal decomposition of ammonium chloride. Pupils will then conduct an investigation into the energy changes which occur during a reversible reaction, using the practical sheet provided students will carry out the experiment and record their results in the table provided. The reversible reaction from this investigation is then shown on the board, with an explanation of the energy changes that are taking place as the reaction moves in either the forward or reverse direction. Pupils will now watch a video on energy changes which take place during a reversible reaction, using this they will need to answer a set of questions. This work can be self-assessed using the answers provided on the PowerPoint presentation. Pupils will now need to complete a ‘Quick Check’ task which includes questions within the module of ‘Rates of Reaction’, students can then self-assess or peer-assess their work using the mark scheme provided. Finally, pupils can complete a crossword which summarizes definitions used within the ‘Rates of Reaction’ module, the answers for this are provided for self/peer assessment. The plenary task required pupils to complete an exit card listing 3 things they have learnt today, 5 key words and 1 question to test their peers knowledge of a subject. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Chemistry GCSE, particularly the 'Atomic Structure & Periodic Table' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a video about the developments in the atomic model starting from Greek philosophers to 20th Century scientists. Pupils are given a set of questions to answer whilst watching the video, this work can be self-assess using answers provided. Next, pupils are given a set of cards with bits of information about different scientists involved in the development of the model of the atom. Pupils should put these cards in order and then use the information on the cards to formulate a timeline in their books, they should use the information on the cards to add labels describing the work of each of the scientists. Once this work has been marked, pupils are then introduced to the idea of isotopes and ions. Pupils will then watch a video and will need to answer questions whilst watching and also complete a fill-in-the-blank summary sentence about what they have learnt. This work can be assessed using the answers provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Using Our Resources’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students are firstly given a set of different objects on their desks and they are also provided with a list of properties, for each object students need to use the words from the list provided to identify the object’s properties. This work can be self-assessed using the mark scheme provided. The next task for pupils to complete is an ‘Each one, teach one’ task - in pairs, pupils are either given information about glass or ceramics, they need to learn the information and teach each other so they are able to complete a table of information on both. This work can then be peer or self-assessed using the mark scheme provided. Next, pupils will watch a video about different composite materials - they will need to answer a set of questions whilst watching the video and this can be marked using the mark scheme provided. The next activity is for pupils to investigate the differences between reinforced concrete vs. normal concrete. Finally, students will complete a ‘Quick Check’ activity - pupils will need to answer a set of questions to summarise what they have learned this lesson. This work can be self-assessed using the mark scheme provided. The plenary activity requires pupils to write a Whatsapp message to their friends outlining what they have learned during the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Rates of Reaction’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with students introduced to the idea of concentration in terms of no. of particles per cm3. Students will then need to ‘Think > Pair > Share’ their ideas of how an increase in concentration may affect the rate of a reaction. Students can use their ideas from this first task to make a prediction for the investigation into the rate of reaction between sodium thiosulphate and different concentrations of HCl. Students will need to conduct this investigation using the practical sheet provided, record their results, plot a graph of their results and complete a conclusion. Students can assess their explanation of the results they collected using the answer provided in the PowerPoint presentation. The next part of the lesson will focus on the effect of pressure on the rate of a reaction. Students will firstly be introduced to the idea of an increasing pressure leading to an increase in the number of particles per cm3, using this information and the diagrams provided pupils can ‘Think > Pair > Share’ their ideas about how an increase in pressure would affect the rate of a reaction. Their answer to this question can self-assessed using the answers provided. Next, students need to work through a set of levelled questions on the effect of pressure on the rate of a reaction. This work can be self-assessed using the answers provided on the PowerPoint. The last task is for pupils to plot a set of results onto graph paper, using these data they can calculate the initial rate of reactions for two concentrations of HCl. Students can assess their work using the mark scheme provided on the PowerPoint. The plenary task is for pupils to write down three quiz questions (and the answers!) to test their peers knowledge of what they have learned in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a mind map task, students are given a definition for recycling and are asked to come up with a mind map of different materials which are able to be recycled. Students can discuss this in pairs and complete the mind map in their books, this work can then be self-assessed using the mark scheme provided. The next part of the lesson focuses on how aluminum is recycled, students will watch a video on the steps involved in the recycling of aluminum. They will then be given a set of jumbled statements, students will need to place the statements in the correct order to describe the method of aluminum recycling. This task can then be marked and corrected using the mark scheme provided. The next learning objective students will achieve is the ability to discuss the advantages and disadvantages of recycling. Students will need be given a card sort of statements, students will be requires to sort these statements into the correct columns - advantages/disadvantages. This task can the be self or peer assessed. Lastly, students will consider the limits to recycling, they will be shown a short video and will be required to answer a set of questions whilst watching. The mark scheme for this task is included in the PowerPoint so students can self-assess their work using the mark scheme provided. The plenary task requires students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Organic Chemistry’ SoW. The lesson begins with pupils watching a video on the differences between complete and incomplete combustion, whilst watching the video students will need to answer a set of questions. This work can be self-assessed using the mark scheme provided. The next task requires pupils to complete an investigation which demonstrates the products of complete combustion, following the steps provided pupils should identify that limewater turns cloudy due to carbon dioxide and anhydrous copper sulphate turns blue in the presence of water. Next, students will focus on writing word and balanced symbol equations for the complete combustion of a set alkanes. Students can self-assess their work using the mark scheme provided. Students will then be a shown a worked example of a calculation used to work out the maximum amount of carbon dioxide released when a known mass of an alkane is burnt in a plentiful supply of air. Pupils will then need to complete a set of questions to practice this maths skill, the answers to these questions are provided in the PowerPoint so students can self-assess their work once it is complete. The final activity is a ‘Quick Check’ task for pupils to answer a set of questions which summarises what they have learnt this lesson, again the answers are provided in the PowerPoint. The plenary task will require pupils to write three sentences to sum up what they have learnt this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Chemistry GCSE, particularly the 'Atomic Structure & Periodic Table' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with student discussing the differences between atoms, compounds & mixtures and writing their ideas down, this is knowledge they should be able to recall from KS3. This is then explored further using an animation with questions that pupils are required to answer. After self-assessment of this task pupils are introduced to the definitions of each: atoms, elements, compounds and mixtures and will need to complete a fill-in-the-blank task to summarise. Pupils will then be given a selection of diagrams on the board, they will need to determine whether these diagrams are representing elements, compounds or mixtures. Once complete they can self-asses their work using the answers provided. The next part of the lesson introduces students to the idea of the periodic table, pupils will need to stick in a copy of it and then will be given a task sheet which can be completed using the names and symbols of the elements. The plenary task is a set of questions about what students have learnt that lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a recap of particle arrangements in an element, compound and a mixture. Students will be asked to ‘Think > Pair > Share’ their ideas, drawing a diagram of the particle arrangement in each as an extra challenge. After a short discussion, the answers will be revealed so students can check their work. The next task requires students to organise a set of statements into two columns - those statements describing a mixture or describing a compound. This task can then be self-assessed using the mark scheme provided once complete. Students are now asked to ‘Think > Pair > Share’ their ideas about what the term ‘pure’ means. After a short class discussion, the definitions (along with examples) for pure and impure substances are provided. Students will now complete an investigation to test three different water samples for purity. Using a pH test and an evaporation test students need to decide which of the samples are pure and which are impure. Students will have the chance to report their findings to the rest of the classroom, explaining their thoughts on which samples were pure/impure. Lastly, students will watch a video on chemical tests used to check the purity of a substance. Students will need to answer a set of questions whilst watching this video, the answers to which are included in the PowerPoint so students can self-assess their work once it is complete. The plenary task requires students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a description of a solution, students can make a note of this in their books and then ‘Think > Pair > Share’ their ideas about examples of solutions they know. After a short discussion in pairs and as a class, some example answers are revealed to students. Next, students are introduced to the key terms - solute, solvent and solution - given the example of salt being dissolved in water to produce a saltwater solution. The process of dissolving is explained using particle theory, using a particle diagram to help demonstrate the concept. Students will then be asked to come up with a role-play to demonstrate the process of dissolving, some groups can show this to the rest of the class. Students will now complete a fill-in-the-blank worksheet to assess their knowledge of what they have learned so far this lesson, this can be marked and corrected using the mark scheme provided. Lastly, students will be shown how to work out the total mass/volume of a solution given the mass/volume of the solute and solvent. Students will then work through a set of problems, the answers to which are included in the PowerPoint so students can self-assess their work using the mark scheme provided. The plenary task requires students to write a twitter message to summarise what they have learned this lesson, including #keywords. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical calculations’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction of concentration, students learn the definitions of key words such as solute, concentration, solvent and dilute and look at the difference between concentrated and dilute solutions. Students will then be shown a selection of diagrams and students will need to which shows the most concentrated and the most dilute solutions. Pupils will now be introduced to the calculation for concentration, students will need to use this calculation to work out a set of problems. Students can self-assess their work using the answers provided. The next set of problems will require pupils to rearrange the equation and also convert units of measurements, again pupils should show all of their working for each of these problems. The answers for these problems are included in the PowerPoint presentation, students can now use this to self-assess their work. The next part of the lesson focuses on titration, firstly students will answer a set of questions whilst watching a video. This work can be assessed using the mark scheme provided. Students will then be given a card sort, they will need to rearrange the cards into the correct order to describe the steps taken during a titration, which can then be assessed using the answers provided. The plenary task is for pupils to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson starts with a set of questions on ionic compounds, pupils will watch a video and answer these questions. Then pupils will be shown a diagram to demonstrate the structure of a giant ionic compound and will be given a set of melting points for a range of ionic compounds, pupils will need to think > pair > share why they think the melting points of ionic compounds are so high. Once students have considered this, a class discussion can reveal some of the students ideas before the presentation moves on and explains why ionic compounds have high melting and boiling points. Students are now given a place-mat of questions, using information from the lesson so far they will need to complete part of it, for lower-ability students they may need extra support such as a text book to help them answer the questions. Once complete pupils can assess their work using the answers provided. The next part of the lesson focuses on electrolysis using ionic compounds, students are shown that only ionic compounds that are molten or dissolved in water are able to conduct electricity. The process of electrolysis is demonstrated to students using an animation . Pupils are then asked to thin > pair > share their ideas on why ionic compounds that are solid cannot conduct electricity. Once some ideas have been discuss as a class, the answer can be revealed on the PowerPoint presentation. Pupils will now complete the remainder of their questions on their place-mat and mark them using the answers provided. Pupils will now be given a set of ions and will need to decide whether they will be found at the positive or negative electrode, this activity can be done as a whole class by pupils holding up answers using whiteboards or in their books. Once completed students can assess their work using the answers provided. The last activity is for pupils to complete a cartoon strip to demonstrate what happens to molten potassium fluoride when it is used to conduct electricity. Part of the cartoon strip is filled in already, pupils just need to add in either diagrams or descriptions, this can also be assessed once complete. The plenary task is a set of answers, pupils need to come up with a set of questions for these answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students will firstly be given a recap on the definition of a polymer and an explanation of the factors which can affect the properties of a polymer. Pupils are then given some information about high-density polyethene and low-density polyethene, they will need to use this information to complete a worksheet of questions. This work can then be self-assessed using the mark scheme provided. Pupils will now complete an investigation into the modification of polymers by finding how the quantity of borax solution can affect the properties of slime, they can record their observations in a table in their books. Next, students are introduced to the processes of thermosetting and thermosoftening polymers with a video - using the information in the video they will need to answer a set of questions. This work can be self-assessed using the mark scheme provided. The last task is a ‘Quick Check’ task - pupils will need to answer a set of questions about what they have learned this lesson. Their work can then be self-assessed using the mark scheme provided in the PowerPoint. The plenary is a ‘Pick a plenary’ activity which requires pupils to either unscramble a set of anagrams or write a summary sentence for the lesson using a list of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’ module. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to chemical reactions, students will read a paragraph of information on chemical reactions. Using the information students will answer a set of questions, this task can then be self-assessed using the mark scheme provided once complete. Students will now watch a video about chemical reactions, they will need to write down as many things you might see/hear/feel during a chemical reaction. This work can the be self-assessed using the mark scheme provided on the PowerPoint presentation. Students will now summarise what they have learned so far by completing a ‘fill-in-the-blank’ task, this work can also be marked and corrected using the anwers provided Students will now consider whether chemical reactions are useful or now, they will be given a list of different chemical reactions and they will need to sort these into two columns - useful or not useful. Students can then self-assess this task when it is complete. Next, students will watch a video on the differences between chemical and physical changes. Whilst watching the video students will need to answer a set of questions, this work can self-assessed using the mark scheme provided. The last task requires students to determine whether a set of examples are demonstrating a chemical or a physical change. They could complete this task as a class, using mini whiteboards. The plenary task requires students to write three sentences to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to different examples of exothermic reactions, this includes video links to more exciting exothermic reactions like the thermite reaction and the screaming jelly baby. Students are also told the definition for an exothermic reaction. Students are now asked to consider what an endothermic reaction is, now that they know the definition for an exothermic reaction. Students are asked to ‘think > pair > share’ their ideas, eventually feeding back into a class discussion and the definition can then be revealed, as well as two two examples. Students will now watch a video on exothermic and endothermic reactions, whilst watching the video they will answer a set of questions. Once this task has been completed, students can self-assess their work against the mark scheme provided on the PowerPoint. Students will now complete an investigation to identify whether a set of three chemical reactions are exothermic or endothermic. They will start the reaction and then measure the temperature over a set period of time, finally working out the change in temperature to determine which type of reaction has occurred. Students can follow instructions on the practical worksheet and record their results in a table drawn into their books. Finally, students will complete a ‘quick check’ task - whereby they will need to answer a question on the topic of the lesson, this can then be checked against the answer provided on the PowerPoint. The plenary task is an anagram challenge, students need to unscramble a set of anagrams which then spell out a set of key words from the last few lessons on reactions. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be shown a demonstration of magnesium being burnt in air, students are asked to predict whether they think the mass of the product will increase, decrease or stay the same. Students are asked to explain their prediction. The demonstration is then carried out, students should record in their books the mass of the magnesium before burning and then the mass of the magnesium oxide after burning, from this they can deduce the mass of the oxygen needed to burn the magnesium. Students can then check their predictions to see if they were correct or not. Now, students can summarise what they have learned by completing a ‘fill-in-the-blank’ task which is a definition for the ‘conservation of mass’ in chemical reactions. This task can be self-assessed against the mark scheme provided. Students will now also complete a ‘Quick Check’ task where they are asked come questions to test their knowledge of what they have learned so far, this work can also be marked against the mark scheme provided. Students will not complete a match-up task, students are asked to complete the sentences by matching the correct phrases together. This helps students to explore the idea of the law of the conservation of mass, considering how this applies to reactions involving solids, liquids and gases. Again, the mark scheme for this task is included for students to check and correct their work. The latter part of the lesson is on balancing equations, students are firstly introduced to the process by which students should balance an equation, demonstrated by the example of magnesium + oxygen -> magnesium oxide. A few more examples are used to talk students through the process, then students will complete a step-by-step worksheet which introduces them to balancing equations at a basic level. The mark scheme for this task is included in the PowerPoint for students to self-assess their work. The plenary task requires students to complete a 3-2-1 reduction of the lesson, to include 3 facts 2 key words and 1 question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)