Here you will find a complete set of 55 simplified lesson plans that should be used alongside the starter/bell tasks and complete NEA template I have developed. Together they will allow for the complete delivery of the new AQA DT NEA.

Theory PowerPoint, Theory lesson sheet plus homework. Please see me other Engineering Theory topics and front cover sheet.

Theory PowerPoint, Theory lesson sheet plus homework. Please see me other Engineering Theory topics and front cover sheet.

Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson). Please see my extensive range of other supporting resources.

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have created an introduction lesson for use when delivering the new AQA NEA courswork task. I have stated the contextual challenges and unpacked them with a slant towards Graphics. However the structure can easily be tweaked to focus on any material base. Please see me other NEA documents for a complete picture of the work I do.

A set of front covers for the theory lessons that I have generated to deliver the content of the AQA DT 9-1 GCSE. There are 4 in total and they are to be used in conjunction with the theory lessons I have uploaded here. They include space for students to record their performance and log any DIRT work that has been carried out.

This is a 20 lesson project design to introduce students to the main manufacturing techniques used in metal. Students are required to design, mark out, cut, file and polish an aluminium vane before using the lathe to turn a post for it to be mounted to. A direction arm will be screw threaded then brazed into place before drilling and welding a base in place. Job cards are used to develop students ability to read and interpret manufacturing spec drawings and begin to work with independance. PowerPoint has embedded gifs to show students main manufacturing techniques. Please check out my theory lessons that run along this project.

Complete starter pack for delivery of the AQA NEA. Included is a launch lesson which is slightly Graphics biased but can be easily modified to your own requirements, a complete set of lesson plans and student template to guide them through the delivery. A set of starter tasks that can be used to refresh theory knowledge during the NEA and a tracker sheet to allow pupils to recieve feedback and improve their work.

I am developing a full range of theory lessons to support the new AQA design technology GCSE 9-1. There are 30 lessons that are taught one a week throughout Y10. Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. To support the theory lessons I have uploaded, please download my pupil tracker sheet. As well as theory lessons I have uploaded project/skills learning journeys that can be easily customised to the projects you are delivering. All content is fully branded and is graphically consistent. Please check out my other resources and give feedback if you find my resources helpful. If there are any missing video links, please contact me and I will send.

Series of 9 lessons that deliver training for the examined Unit 3 as part of the new BTEC Tech Award Engineering. The lessons cover isometric and orthographic training as well as SpaceClaim (CAD) training (Unit 1B). They are designed to give students the skills required to complete the Examination they will sit, as well as support the work required to complete Unit 1B (design and produce a prototype). Part of the lessons focus on redrawing products they have previously manufactured (a small passive amplifier, also available in my shop) but could be easily swapped out for an alternative project of your choosing. Includes teaching PowerPoint, Student Booklet, Lesson Plans and Learning Objectives/Starters/Plenaries. Please also see my other lessons that support this qualification, I have the whole course uploaded onto my shop.

I have included the SOW that I have developed for the delivery of the new BTEC Tech Award for Engineering. i have a full set of resources to support this course in my TES shop.

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation