The Internet (or internet) is the global system of interconnected computer networks that uses the Internet protocol suite (TCP/IP) to communicate between networks and devices. The World Wide Web, commonly known as the Web, is an information system where documents and other web resources are identified by Uniform Resource Locators, which may be interlinked by hyperlinks, and are accessible over the Internet. (wikipedia definitions) This is part of a series of 45-60 minute lessons that will give students (and often, teachers) a much greater understanding of what the internet is, how it works and what the World Wide Web is (no, it is not the internet). Each lesson comprises: - a fully animated PowerPoint with explanatory slides - loads of embedded videos (can be extracted if required) - worksheets and self-evaluation files The lesson objectives are to understand: 1. what the Internet is (this FREE resource) 2. how the Internet works 3. what the World Wide Web is 4. what web pages are and HTML ALL my postings are FULLY "classroom-tested" - before I publish, my lessons are tested by both myself and colleagues, rigorously evaluated and discussed, and continually updated to maximise their effectiveness. But there is always the possibility of error and room for improvement, so do please provide constructive feedback.

There are many sites offering Scratch Projects. However, many tend to be like recipes - students almost mechanically enter code and create “delicious cakes”, without learning a lot about Scratch. My goal is to get students to create a fun project, and at the same time learn how the instructions work and fit together. I use the following approach: - break the project into manageable chunks - present “pseudo-code” for each chunk - provide the Scratch commands to implement the pseudo-code, but jumbled up In this way, students learn about pseudo-code (an important part of coding), and have to understand the Scratch instructions in order to sequence them correctly to match the pseudo-code. The lessons comprise: 1. a PowerPoint with instructions 2. a Word document with the instruction slides printed 2 to a page as a handout 3. accompanying Scratch files for teachers that match each stage of the project Lessons in the series: FREE introduction to Scratch. Moving a sprite through a maze. A question and answer type quiz. A game where students move a sight with the mouse to shoot ghosts. A Music Player with layers of menus. Simulates a toy bear with touch pads. Drawing shapes and repeating patterns. Alien spacecraft attack a base that must be defended. An Octopus must swim through walls of hungry sharks. Navigate through different worlds Bundle I-III Bundle IV-VI Bundle VII-IX Bundle I-IX ALL my postings are FULLY “classroom-tested”, and continually updated. But there is always the possibility of error and room for improvement, so please provide constructive feedback.

WRITTEN FOR THE NEWLY RELEASED SCRATCH 3 In my series of Scratch projects, students are encouraged to learn through doing - creating projects that encourage learning. In this NEW series of lessons for Scratch 3, I provide a more structured approach, looking in detail at Scratch programming tools. Each tool is explored through simple projects, and students then go on to further explore using guided project worksheets. What is Scratch v3 The following lessons will be published as a package shortly - please Follow Me to be kept up to date with their publication. Events and Triggers Controls Motion and the Stage Data Variables Operations - number Operations - text The Graphics editor The lessons comprise: a fully animated PowerPoint with explanatory slides, together with the project instructions a Word document with the PowerPoint project instruction slides printed 2 to a page as a handout for students to follow accompanying fully-working Scratch3 project files for students and teachers Let me know if you have any questions or suggestions, and a BIG BIG thanks for looking (as a full time practising teacher, I KNOW how time consuming this process can be). ALL my postings are FULLY “classroom-tested” - before I publish, my lessons are tested by both myself and colleagues, rigorously evaluated and discussed, and continually updated to maximise their effectiveness. But there is always the possibility of error and room for improvement, so do please provide constructive feedback. Teacher/Author: Barrie James Search words: scratch, computer, programming, coding, algorithm

I’ve created and delivered a series of lessons for Junior students this year, and the response was overwhelming. Students loved learning about 3D graphics and went on to produce some amazing creations of their own. While I thought it might be too advanced, students as young as 8 have grasped and loved using it. 3D GRAPHICS REALLY IS A USEFUL SKILL FOR THE DIGITAL FUTURE. The lessons assume absolutely no knowledge and build up in a gradual way Lessons 1-2 (FREE) What is Blender The Blender interface Navigating the 3D view port Lessons 3-5 Transforming objects Creating, selecting and duplicating objects Project: create a snowman Lessons 6-9 Rendering, colours and lighting Editing objects Project: create a donut Lessons 10-13 3D Text Box modelling - extruding, loop cuts, insets, bevels Project: create a Treasure Chest Lessons 14-15 Animations using Timeframes Animations using Rigid Bodies Each lesson is delivered via an animated PowerPoint with an accompanying Workbook, and follows a similar format: A short video to inspire (embedded in the PowerPoint) Explanations about any new concepts and skills A demo of what will be covered (Blender demo files included) Working together trying out these new concepts and skills (Workbook and Blender exercise files are provided) Free exploration A project bringing it all together (a finished Blender file is provided) Let me know if you have any questions or suggestions, and a BIG BIG thanks for looking (as a full time practicing teacher, I KNOW how time consuming this process can be). ALL my postings are FULLY “classroom-tested” - before I publish, my lessons are tested by both myself and colleagues, rigorously evaluated and discussed, and continually updated to maximise their effectiveness. But there is always the possibility of error and room for improvement, so do please provide constructive feedback.

Lessons in this series so far (always more to follow): A series of lessons exploring Scratch 3 programming concepts. Scratch v3 Tutorials A FREE lesson explaining all about sprites, scripts, stages, etc… An introduction to Scratch A maze type project that adds multiple levels of complexity. Save the Penguin Students create a question and answer type quiz, adding a timer, scores and other enhancements. Design a Quiz Students create a game where they move a target with the mouse to shoot the ghosts. The time allowed and the speed and number of ghosts can be varied. Ghost Busting Students create a Music Player with layers of menus for different categories of music. Audio files can then be uploaded as the tracks for each category. Music Player Students create a simulation of a toy bear that responds to “touch pads”, speaks and talks. Interactive Toy Bear Students draw shapes and repeating patterns using the pen in Scratch. Drawing patterns and shapes Students create a space game with a scrolling backdrop (sprite) and alien spacecraft appearing from any edge attacking the base. Base Attack A game similar to Flappy Birds but moving an Octopus through a wall of hungry Sharks. Flappy Octopus Students must capture items in their journey through 2 worlds. Worlds Cost-effective Bundles: All NINE projects for the price of six Projects 1-3 Projects 4-6 Projects 7-9

Machine Learning and AI are terms we all hear a lot about every day. They affect our lives profoundly and yet, we know so little about either. Producing this presentation in what I hope is an easy to understand form, was hugely challenging and immensely rewarding, and I hope it can benefit you and your students. We all need at least a basic understanding of what is happening in the world of AI. This lesson for absolute beginners looks at what is intelligence (easy start!!) what is machine learning how AI is related to machine learning the ethical concerns of bias The lesson comprises: a fully animated PowerPoint with explanatory slides inspiring embedded videos (if you need to extract, click here) Let me know if you have any questions or suggestions, and a BIG BIG thanks for looking (as a full time practising teacher, I KNOW how time consuming this process can be). ALL my postings are FULLY “classroom-tested” - before I publish, my lessons are tested by both myself and colleagues, rigorously evaluated and discussed, and continually updated to maximise their effectiveness. But there is always the possibility of error and room for improvement, so do please provide constructive feedback.

There are many sites offering Scratch Projects. However, many tend to be like recipes - students almost mechanically enter code and create “delicious cakes”, without learning a lot about Scratch. My goal is to get students to create a fun project, and at the same time learn how the instructions work and fit together. I use the following approach: - break the project into manageable chunks - present “pseudo-code” for each chunk - provide the Scratch commands to implement the pseudo-code, but jumbled up In this way, students learn about pseudo-code (an important part of coding), and have to understand the Scratch instructions in order to sequence them correctly to match the pseudo-code. The lessons comprise: 1. a PowerPoint with instructions 2. a Word document with the instruction slides printed 2 to a page as a handout 3. accompanying Scratch files for teachers that match each stage of the project Lessons in the series: FREE introduction to Scratch. Moving a sprite through a maze. A question and answer type quiz. A game where students move a sight with the mouse to shoot ghosts. A Music Player with layers of menus. Simulates a toy bear with touch pads. Drawing shapes and repeating patterns. Alien spacecraft attack a base that must be defended. An Octopus must swim through walls of hungry sharks. Navigate through different worlds Bundle I-III Bundle IV-VI Bundle VII-IX Bundle I-IX ALL my postings are FULLY “classroom-tested”, and continually updated. But there is always the possibility of error and room for improvement, so please provide constructive feedback.

Below are links to all my Blender v2.79 resources: Lessons 1-2 (FREE) Blender 3D - (3-5) creating, selecting and transforming objects Blender 3D - (6-9) rendering, colours, lighting and editing objects Blender 3D - (10-13) 3D Text, modelling - extruding, loop cuts, insets, beveling Blender 3D - (14-15) animating using time frames and rigid bodies Blender-3D-3-15-BUNDLE-3964949">Blender 3D - (3-15) BUNDLE

Embedding videos in a PowerPoint presentation is a really useful feature, but if you are using an older computer to display the slideshow, or an external monitor, the video playback may flicker. The simplest solution to this is to save the video as an mp4 file, and then play back with whatever video player you normally use outside of PowerPoint.

HUGE REDUCTION on all Scratch v2 resources. In this project, the Scratch Pen is used to draw geometric shapes using Repeat blocks. There are many sites offering Scratch Projects. However, many tend to be like recipes - students almost mechanically enter code and create “delicious cakes”, without learning a lot about Scratch. My goal is to get students to create a fun project, and at the same time learn how the instructions work and fit together. I use the following approach: - break the project into manageable chunks - present “pseudo-code” for each chunk - provide the Scratch commands to implement the pseudo-code, but jumbled up In this way, students learn about pseudo-code (an important part of coding), and have to understand the Scratch instructions in order to sequence them correctly to match the pseudo-code. The lessons comprise: 1. a PowerPoint with instructions 2. a Word document with the instruction slides printed 2 to a page as a handout 3. accompanying Scratch files for teachers that match each stage of the project ALL my postings are FULLY “classroom-tested”, and continually updated. But there is always the possibility of error and room for improvement, so please provide constructive feedback.

HUGE REDUCTION on all Scratch v2 resources. In this project, students create their own Music Player with levels of menus for different categories of music. The corresponding music tracks can then be uploaded. There are many sites offering Scratch Projects. However, many tend to be like recipes - students almost mechanically enter code and create “delicious cakes”, without learning a lot about Scratch. My goal is to get students to create a fun project, and at the same time learn how the instructions work and fit together. I use the following approach: - break the project into manageable chunks - present “pseudo-code” for each chunk - provide the Scratch commands to implement the pseudo-code, but jumbled up In this way, students learn about pseudo-code (an important part of coding), and have to understand the Scratch instructions in order to sequence them correctly to match the pseudo-code. The lessons comprise: 1. a PowerPoint with instructions 2. a Word document with the instruction slides printed 2 to a page as a handout 3. accompanying Scratch files for teachers that match each stage of the project ALL my postings are FULLY “classroom-tested”, and continually updated. But there is always the possibility of error and room for improvement, so please provide constructive feedback.

This is a series of 8 by 45-minute lessons designed to support the Switched On Computing unit 4.5, and has been written with year 4 pupils in mind, but is also suitable for older pupils. Each lesson is presented through a colourful and stimulating PowerPoint presentation, with clearly defined Learning Objectives and embedded videos and is accompanied with worksheets. **Note - the wiki example is created in wikispaces.com (no longer available) but can be adapted to any similar wiki hosting site. ** The lesson objectives are: - understand what a Wiki is - become familiar with the web’s largest Wiki - Wikipedia - practice Google search skills - develop formatting skills - write for a target audience (your peers) - create Pages in our Wiki - develop proofreading and editing skills - peer review and self assessment ALL my postings are FULLY “classroom-tested”, and continually updated to maximize their effectiveness. But there is always the possibility of error and room for improvement, so do please provide constructive feedback.

HUGE REDUCTION on all Scratch v2 resources. This is designed to support the Switched On Computing Year 4 unit 4.2, and has been specifically written with year 4 pupils in mind. My goal is to get students to create a fun project, whilst at the same time learn how the instructions work and fit together. To this end, I use the following approach: - break the project down into manageable chunks - present students with “pseudo-code” for each chunk - provide students with the Scratch commands to implement the pseudo-code, but jumbled up In this way, students learn about pseudo-code (an important part of coding), and have to understand the Scratch instructions in order to sequence them correctly to match the pseudo-code. The lessons comprise: 1. a PowerPoint with introductory slides and the project instructions 2. a Word document with the PowerPoint instruction slides printed 2 to a page as a handout 3. accompanying Scratch project files for teachers that match the project Other lessons in this series: A FREE introduction to Scratch. Project I: A maze type project. Project II: Create a question and answer type quiz. Project III: A game where students move a sight with the mouse to shoot ghosts. Project IV: Students create a Music Player with layers of menus for different categories. Project V: Simulate a toy with touch pads. Project VI: Drawing shapes and repeating patterns. Project VII: Base Attack. [Project VIII: Flappy Octopus.</> ](https://www.tes.com/teaching-resource/scratch-viii-flappy-octopus-11558745)Budle of Projects I-III. Budle of Projects IV-VI. ALL my postings are FULLY “classroom-tested”, and continually updated to maximize their effectiveness. But there is always the possibility of error and room for improvement, so do please provide constructive feedback.

This is part of the topic Creating a Class Wiki but is also useful as a one-off lesson to help students learn basic formatting skills.

This is part of the topic Creating a Class Wiki but is also useful as a one-off lesson to help students search effectively.

HUGE REDUCTION on all Scratch v2 resources. In my series of Scratch projects, students are encouraged to learn through doing - creating projects that encourage learning. In this NEW series of lessons for Scratch 2, I provide a more structured approach, looking in detail at Scratch programming tools. Each tool is explored through simple projects, and students then go on to further explore using guided project worksheets. What is Scratch v2 Events and Triggers Controls Motion and the Stage Data Variables Operators - number Operators - text The lessons comprise: a fully animated PowerPoint with explanatory slides, together with the project instructions a Word document with the PowerPoint project instruction slides printed 2 to a page as a handout for students to follow accompanying fully-working Scratch project files for students and teachers Let me know if you have any questions or suggestions, and a BIG BIG thanks for looking (as a full time practising teacher, I KNOW how time consuming this process can be). ALL my postings are FULLY “classroom-tested” - before I publish, my lessons are tested by both myself and colleagues, rigorously evaluated and discussed, and continually updated to maximise their effectiveness. But there is always the possibility of error and room for improvement, so do please provide constructive feedback. Teacher/Author: Barrie James Search words: scratch, computer, programming, coding, algorithm

I know only too well how intimidating computers can be for primary teachers - even with the aid of on-line tools like Purple Mash. With this in mind, and being extremely computer literate myself, I produced a series of Teacher-friendly PowerPoints (with embedded videos) and Worksheets to fully support the module. As my TAs commented - these make it so easy, even for us! The pack covers the Purple Mash topics Creating a Flip Book Introduction to 2Animate Animations with backgrounds and sounds Exploring animations More advanced animations I delivered these lessons in 5 one-hour sessions, over half a term. Let me know if you have any questions or suggestions, and a BIG BIG thanks for looking (as a full time practising teacher, I KNOW how time consuming this process can be). ALL my postings are FULLY “classroom-tested” - before I publish, my lessons are tested by both myself and colleagues, rigorously evaluated and discussed, and continually updated to maximise their effectiveness. But there is always the possibility of error and room for improvement, so do please provide constructive feedback.

The Scratch 3 version is here. Click here for a full listing of all my Scratch Projects In this project, the player must move a sprite through the maze using the keyboard. Timers, obstacles (floating sprites) and a more difficult maze can be added as enhancements . There are many sites offering Scratch Projects. However, many tend to be like recipes - students almost mechanically enter code and create “delicious cakes”, without learning a lot about Scratch. My goal is to get students to create a fun project, and at the same time learn how the instructions work and fit together. I use the following approach: - break the project into manageable chunks - present “pseudo-code” for each chunk - provide the Scratch commands to implement the pseudo-code, but jumbled up In this way, students learn about pseudo-code (an important part of coding), and have to understand the Scratch instructions in order to sequence them correctly to match the pseudo-code. The lessons comprise: 1. a PowerPoint with instructions 2. a Word document with the instruction slides printed 2 to a page as a handout 3. accompanying Scratch files for teachers that match each stage of the project ALL my postings are FULLY “classroom-tested”, and continually updated. But there is always the possibility of error and room for improvement, so please provide constructive feedback.

Click here for a full listing of all my Scratch Projects In this project, students create a toy bear, using sprites to simulate “touch pads” -making the bear smile, blink, change colour, etc. Enhancements include using the keyboard instead of sprites, and adding sound. There are many sites offering Scratch Projects. However, many tend to be like recipes - students almost mechanically enter code and create “delicious cakes”, without learning a lot about Scratch. My goal is to get students to create a fun project, and at the same time learn how the instructions work and fit together. I use the following approach: - break the project into manageable chunks - present “pseudo-code” for each chunk - provide the Scratch commands to implement the pseudo-code, but jumbled up In this way, students learn about pseudo-code (an important part of coding), and have to understand the Scratch instructions in order to sequence them correctly to match the pseudo-code. The lessons comprise: 1. a PowerPoint with instructions 2. a Word document with the instruction slides printed 2 to a page as a handout 3. accompanying Scratch files for teachers that match each stage of the project ALL my postings are FULLY “classroom-tested”, and continually updated. But there is always the possibility of error and room for improvement, so please provide constructive feedback.

The Scratch 3 version is here. Click here for a full listing of all my Scratch Projects In this project, students use the mouse to move a target across the screen to shoot ghosts. The coding makes it easy to add any number of ghosts, varying their size and speed, There are many sites offering Scratch Projects. However, many tend to be like recipes - students almost mechanically enter code and create “delicious cakes”, without learning a lot about Scratch. My goal is to get students to create a fun project, and at the same time learn how the instructions work and fit together. I use the following approach: - break the project into manageable chunks - present “pseudo-code” for each chunk - provide the Scratch commands to implement the pseudo-code, but jumbled up In this way, students learn about pseudo-code (an important part of coding), and have to understand the Scratch instructions in order to sequence them correctly to match the pseudo-code. The lessons comprise: 1. a PowerPoint with instructions 2. a Word document with the instruction slides printed 2 to a page as a handout 3. accompanying Scratch files for teachers that match each stage of the project ALL my postings are FULLY “classroom-tested”, and continually updated. But there is always the possibility of error and room for improvement, so please provide constructive feedback.