A full differentiated lesson based on the new AQA (P3.4) SOW. The lesson covers issues with fossil fuels, the advantages and disadvantages of nuclear energy and outlines the Chernobyl disaster (mainly to incite interest). A differentiated question grid is used to apply learning and to conduct AFL (answers included). The lesson then covers the advantages and disadvantages of renewable energy resources prior to a GCSE PP question (answers included) facilitating further application of knowledge and AFL. The plenary involves students reflecting upon their progress against the learning objectives.

This lesson is based on the Activate 2 (P2.2) SOW but can be used for others. The lesson covers the law of conservation of energy, different energy stores, energy transfer and dissipation. Learning is assessed at 3 stages using think pair and share, an energy store match up, and a 4 mark question to answer. Students are scaffolded up to each task, and answers are included to allow self/peer assessment. The practical activity involves 6 small experiments that the students must visit, observe energy transfers and explain their observations within a table. Extension questions are included for those who finish early, again the answers are included within the slides. The plenary involves students reflecting upon their progress against the learning objectives.

A full lesson covering specific heat capacity based on the AQA SOW. Students are scaffolded up to using the equation within calculations prior to a practical. The (required) practical follows the AQA SOW but employs voltmeters and ammeters instead of Joulmeters. Awards can be given to students who calculate the closest SHC for aluminium.

This lesson is based on the activate 1 SOW and so is pitched to a year 7 class. The lesson includes an introduction to the solar system through video, think pair and share and a simple DART activity. Students then complete an exercise where the distance between planets and the sun is modelled through folding and annotating paper. A graph drawing exercise is included as an extension, where students link the distance from the sun to temperature.

A full differentiated lesson based on the activate 2 (P3.3) SOW but can be used for others. The lesson covers pressure in gases and the effects of volume and temperature. Student understanding is checked with a differentiated question grid challenge. Atmospheric pressure is introduced ahead on the 'crushing can' demonstration - very easy; a can, water, tongues and bunsen burner is required (youtube for demo). Students then reorder statements to explain their observations. The effect of altitude on gas pressure is then discussed with use of examples. The plenary is an 'articulate' activity where students make logical and scientific speeches making use of key words from the lesson. Those with the most key words used can be given a reward. This lesson includes all answers for self/peer assessment and no additional worksheets are required. The use of animation and the choice of topics to explain each theory were chosen with an emphasis on promoting a love of learning. Timers are included to promote pace.

A full lesson based on the Activate 2 (P3.1) SOW but can be used for others. This lesson covers the units of speed, how to calculate speed, distance and time. Student understanding is checked with a simple calculation table and answers are peer/self assessed. The lesson then moves onto averages speed vs. instantaneous speed and relative motion. A differentiated question grid challenge is then used to apply learning and facilitate AFL for peer/self marking. The practical activity involves students calculating the speed of a toy car down a ramp, which can be divided into 5 sections to facilitate the calculation of instantaneous speed within each section. The plenary is based on the students reflecting upon their progress against the learning objectives.

Full lesson with everything you need. Based on activate SOW and pitched to a year 7 class. Lesson is differentiated to support both more and less able. Timings included to promote pace and animations for peer or self marking/correction.

Topic of refraction for KS3, tailored to activate SOW and pitched to a year 7 class. Can be used above or below this criteria depending on ability. Lesson is differentiated and includes timers/animations for pace and Q/A during self/peer marking.

Lesson based on Edexcell ‘keeping warm’, covering conduction convection, radiation and insulation. Can be used for other SOW. Everything you need for the lesson included; simple practical exercise (based on insulators), timers to promote pace, animations for Q/A during review of answers after each learning check point. Plenary based on self reflection against lesson LO’s.

A full AQA physics revision lesson specifically tailored towards the P1 checkpoint (conservation and dissipation of energy). This lesson was used for a low ability group and is based on the foundation P1 test paper. Includes whiteboard activity, think pair and share, work done, GPE and power calculations. Timers are included to promote pace and PowerPoint animations are used to facilitate Q/A during review of each learning checkpoint.

A full, differentiated lesson on the topic of drag forces and friction. The lesson is based on the activate 1 SOW and so is pitched to a year 7 group. The lesson includes a think pair and share, DART activity, simple practical activity (requiring different surfaces and a newtonmeters), differentiated question grid challenge and a reflective plenary. All answers are incorporated into the slides via animation and timers are included to promote pace.

This lesson is based on the Activate 2 (P1.7) SOW but can be used for others. The lesson includes the making of electromagnets, increasing the strength of electromagnets and differentiates between permanent and electromagnets. A practical demonstration and a fun think pair and share session are included to maintain student focus. Students attempt a focus mark question based on the content of the lesson and peer assess - this can be used for focus marking. The plenary involves students reflecting upon their progress against the learning objectives, and how they can improve. No additional worksheets required, answers incorporated into the slides for written activities.

A full differentiated lesson based on the Activate 2 (P2.1) SOW but can be used for others. This lesson introduces the Joule and how to calculate kJ's. Energy in different food products are compared by the students with questions and a DART activity to check for understanding. The energy requirements of different activities are then compared prior to a discussion on the balance of energy. Students then take part in a 'beat the grid' challenge answering as many differentiated questions as they can within 10 minutes. A worksheet exercise then takes place to apply and reinforce knowledge based on the content of the lesson. The plenary is based on students reflecting upon their progress against the learning objectives. This lesson includes timers and animation to promote pace, and all answers are included in the slides to facilitate self/peer marking. This lesson also promotes the correct use of literacy and numeracy through the activities included.

Full differentiated lesson based on colour (activate SOW). Includes timers and animations to promote pace and Q/A during peer/self correction or marking. Whiteboard AFL activity included as well as fun 'car race' plenary.

Full, differentiated lesson with everything you need for the topic of reflection. Tailored around the activate SOW and used within a year 7 class, can be applied to other SOW and year groups. Use of timers to promote pace and powerpoint animations to support Q/A during self/peer marking of answers.

A lesson based on the Activate 2 (P1.2) SOW but can be used for others. The lesson involves an introduction to circuit symbols, current, measuring current and cells/batteries. Students then model current in a circuit using rope. There is then a simple practical where students measure current within simple circuits; battery packs, connection leads, ammeters, bulbs, motors, buzzers and switches are required. This is followed by a differentiated question grid challenge where students answer as many questions as they can within 10 minutes. The plenary is based on student reflection against the learning objectives. Students can be asked to read out their answers during the plenary, and this can be 'pop corned' on by throwing around a soft toy.

A complete lesson based on the topic of loudness and pitch. The lesson is based on the Activate 1 (2.3) SOW but can be used for others. All resources/activities are incorporated into the slides, no additional worksheets required. Planner cards (red, green and yellow) are needed for AFL at one of the learning checkpoints, and an oscilloscope would be good for the demonstration - a video is included if this is not possible. The lesson teaches the relationship between loudness and amplitude, and frequency and pitch prior to class wide AFL. The audible range is discussed and students are then redirected to the question posed within the starter. Students must then design an audible deterrent systems to protect certain animals (such as a goldfish) from predators making use of a table which gives the audible range of different species. The plenary is based on student reflection on their progress against the learning objectives, a soft toy can be thrown between students to elect who reads out their answer.

This lesson is based on the Activate 2 (P3.5) SOW but can be used for others. Covers pressure in relation to force and weight, calculating pressure and the relationship between area and pressure. A simple practical is included where students investigate the indentation of weights within sand when applied on a different numbers of supports. Ranked questions tailored to this practical are then conducted (answers included). The plenary involves students reflecting upon their progress against the learning objectives. If you like this lesson please visit my shop for other more comprehensive resources: https://www.tes.com/teaching-resources/shop/matt_nick1in

A full differentiated lesson based on the Activate 2 (P3.2) SOW but can be used for others. The lesson includes the calculation of speed (with whiteboard activity) and interpreting/drawing motion graphs with a range of activities. A support sheet is included for SEND pupils during the final graph drawing activity. All answers are included and timers are used to promote pace. If you like this lesson please visit my shop for more: https://www.tes.com/teaching-resources/shop/matt_nick1in

A full lesson based on the Activate 2 (P2.1) SOW. This is a revision lesson which covers circuits and current, potential difference and series and parallel circuits. Student understanding is checked with 2 planner card activities and learning applied to a simple worksheet task (taken from other TES author). Students can 'stretch' to attempt a GCSE PP question. All answers included. If you like this resource please visit my shop for more: https://www.tes.com/teaching-resources/shop/matt_nick1in