This lesson describes how molecules move across cell membranes by passive transport, as exemplified by simple and facilitated diffusion. The PowerPoint and accompanying resource have been designed to cover the first part of specification point 2.5 of the Edexcel International A-level Biology specification and the factors that increase the rate of diffusion are covered along with the limitations imposed by the phospholipid bilayer and the role of channel and carrier proteins The structure and properties of cell membranes were described in the lesson covering 2.2, so this lesson has been written to include continual references to the content of that lesson. This enables links to be made between the movement across a cell membrane with the concentration gradient, the parts of the membrane that are involved and any features that may increase the rate at which the molecules move. A quick quiz competition challenges students to recall Fick’s law of diffusion and a series of questions and tasks are used to demonstrate how a large surface area, a short diffusion distance and the maintenance of a steep concentration gradient will increase the rate of simple diffusion. Another quick quiz round is then used to introduce temperature and size of molecule as two further factors that can affect simple diffusion. The remainder of the lesson focuses on facilitated diffusion and describes how transmembrane proteins are needed to move small, polar or large molecules from a high concentration to a lower concentration across a partially permeable membrane

This fully-resourced lesson describes how magnification and resolution can be achieved using light and electron microscopy. The engaging PowerPoint and accompanying resources have been designed to cover the content of points 3.7 (i) & (ii) of the Edexcel International A-level Biology specification and also considers how specimens are stained. To promote engagement and focus throughout this lesson, the PowerPoint contains a quiz competition with 7 rounds. The quiz rounds found in this lesson will introduce the objective lens powers, the names of the parts of a light microscope and emphasise some of the other key terms such as resolution. The final round checks on their understanding of the different numbers that were mentioned in the lesson, namely the differing maximum magnifications and resolutions. Time is taken to explain the meaning of both of these microscopic terms so that students can recognise their importance when considering the organelles that were met earlier in topic 3. By the end of the lesson, the students will be able to explain how a light microscope uses light to form an image and will understand how electrons transmitted through a specimen or across the surface will form an image with a TEM or a SEM respectively.

This fully-resourced lesson describes the role of mitosis and the cell cycle in producing genetically identical daughter cells. The detailed PowerPoint and accompanying resources have been designed to cover point 3.14 of the Edexcel International A-level Biology specification and explains the importance of these cells for growth and asexual reproduction. In an earlier lesson covering meiosis (3.10), students were introduced to the different phases and structures involved in the cycle so this lesson builds on that by providing greater detail of the key events in each phase. Beginning with a focus on interphase, the importance of DNA replication is explained so that students can initially recognise that there are pairs of identical sister chromatids and then can understand how they are separated later in the cycle. A quiz competition has been written into the lesson and this runs throughout, challenging the students to identify the quantity of DNA in the cell (in terms of n) at different points of the cycle. The main part of the lesson focuses on prophase, metaphase, anaphase and telophase and describes how the chromosomes behave in these stages. Students will understand how the cytoplasmic division that occurs in cytokinesis results in the production of genetically identical daughter cells. This leads into a series of understanding and application questions where students have to identify the various roles of mitosis in living organisms as well as tackling a Maths in a Biology context question. The lesson concludes with a final round of MITOSIS SNAP where they only shout out this word when a match is seen between the name of a phase, an event and a picture.

This fully-resourced lesson describes how post-transcriptional changes to mRNA enable 1 gene to give rise to multiple proteins. The detailed PowerPoint and accompanying resources have been designed to cover point 3.19 of the Edexcel International A-level Biology specification. The lesson begins with a knowledge recall as the students have to recognise the definition of a gene as a sequence of bases on a DNA molecule that codes for a sequence of amino acids in a polypeptide chain. This description was introduced in topic 2 and the aim of the start of the lesson is to introduce the fact that despite this definition, most of the nuclear DNA in eukaryotes doesn’t actually code for proteins. A quick quiz competition is then used to introduce exons as the coding regions within a gene before students are challenged to predict the name of the non-coding regions and then to suggest a function for these introns. Moving forwards, pre-mRNA as a primary transcript is introduced and students will learn that this isn’t the mature strand that moves off to the ribosome for translation. Instead, a process called splicing takes place where the introns are removed and the remaining exons are joined together. Another quick quiz round leads to an answer of 20000 and students will learn that this is the number of protein-coding genes in the human genome. Importantly, the students are then told that the number of proteins that are synthesised is much higher than this value and a class discussion period encourages them to come up with biological suggestions for this discrepancy between the two numbers. The lesson concludes with a series of understanding and application questions where students will learn that alternative splicing enables a gene to produce more than a single protein and that this natural phenomenon greatly increases biodiversity.

This fully-resourced lesson describes how polygenic inheritance gives rise to phenotypes that show continuous variation. The engaging PowerPoint and accompanying resources have been primarily designed to cover points 3.20 (i) & 3.21 of the Edexcel International A-level Biology specification but also includes activities to challenge the students on previous concepts in topics 3 and 2. The students begin the lesson by having to identify phenotype and species from their respective definitions so that a discussion can be encouraged where they will recognise that phenotypic variation within a species is due to both genetic and environmental factors. The main part of the the lesson focuses on these genetic factors, and describes how mutation and the events of meiosis contribute to this variation. A range of activities, which include exam-style questions and quick quiz rounds, are used to challenge the students on their knowledge and understanding of substitution mutations, deletions, insertions, the genetic code, crossing over and independent assortment. Moving forwards, the concept of multiple alleles is introduced and students will learn how the presence of more than 2 alleles at a locus increases the number of phenotypic variants. Another quick quiz round is used to introduce polygenic inheritance and the link is made between this inheritance of genes at a number of loci as an example of continuous variation. The final part of the lesson describes a few examples where environmental factors affect phenotype, such as chlorosis in plants. As this is the final lesson in topic 3, the numerous activities can be used for revision purposes and to demonstrate the links between different biological topics.

This detailed lesson introduces the 3 main principles of the cell theory and describes how cells are organised into tissues, organs and organ systems. The engaging PowerPoint and accompanying resources have been designed to cover points 2.1 (i) & (ii) of the Edexcel A-level Biology B specification. The cell theory is introduced at the start of the lesson and the 1st principle is immediately discussed to ensure that students are aware that all living organisms are made of cells. This principle is discussed with relation to viruses to enable students to understand that the lack of cell structure in a virus is one of the reasons that they are not considered to be living. The second principle states that the cell is the basic unit of structure and organisation and this leads into the main part of the lesson where specialised cells and their groupings into tissues are considered. Students are challenged to compare an amoeba against a human to get them to focus on the difference in the SA/V ratio. This acts as an introduction into the process of differentiation and a recognition of its importance for multicellular organisms. Students will discover that a zygote is a stem cell which can express all of the genes in its genome and divide by mitosis. Time is then taken to introduce gene expression as this will need to be understood in the later topics of the course. Moving forwards, the lesson uses the process of haematopoiesis from haematopoietic stem cells to demonstrate how the red blood cell and neutrophil differ significantly in structure despite arising from the same cell along the same cell lineage. A series of exam-style questions will not only challenge their knowledge of structure but also their ability to apply this knowledge to unfamiliar situations. These differences in cell structure is further exemplified by the epithelial cells of the respiratory tract and students will understand why the shape and arrangement of these cells differ in the trachea and alveoli in line with function. The link between specialised cells and tissues is made at this point of the lesson with these examples of epithelium and students will also see how tissues are grouped into organs and then into organ systems. The third principle states that cells arise from pre-existing cells and this will be demonstrated later in topic 2 with mitosis and meiosis.

This fully-resourced lesson describes the ultrastructure of a prokaryotic cell including the nucleoid, plasmid, 70S ribosomes and cell wall. The engaging PowerPoint and accompanying resources have been designed to cover specification point 2.1 (iii) of the Edexcel A-level Biology B specification but has been specifically designed to be taught after the lesson on the ultrastructure of eukaryotic cells, specification point 2.1 (v), so that comparisons can be drawn. A clear understanding of terminology is important for A-level Biology so this lesson begins with a challenge, where the students have to come up with a 3-letter prefix that they believe will translate as before or in front of . This leads into the discovery of the meaning of prokaryote as before nucleus which acts to remind students that these types of cell lack this cell structure. Links to the previous lessons on the eukaryotic cells are made throughout the lesson and at this particular point, the students are asked to work out why the DNA would be described as naked and to state where it will be found in the cell. Moving forwards, the students will discover that these cells also lack membrane bound organelles and a quick quiz competition challenges them to identify the specific structure that is absent from just a single word. In addition to the naked DNA, students will learn that there are also ribosomes in the cytoplasm and will discover that these are smaller than those found in the cytoplasm of an eukaryotic cell (but the same size as those in chloroplasts and mitochondria). The remainder of the lesson focuses on the composition of the cell wall, the additional features of prokaryotic cells such as plasmids and there is also the introduction of binary fission as the mechanism by which these organisms reproduce so that students can recognise that prokaryotic cells do not contain centrioles

This fully-resourced lesson describes the structure of the cell surface membrane and references Singer and Nicholson’s fluid mosaic model. The detailed and engaging PowerPoint and accompanying resources have been designed to cover specification point 4.2 (i) of the Edexcel A-level Biology B specification and also makes clear links are made to related topics such as the binding of hormones as covered in topic 9 and the electron transport chain as covered in topic 5. The fluid mosaic model is introduced at the start of the lesson so that it can be referenced at appropriate points throughout the lesson. Students were introduced to phospholipids in topic 1 and an initial task challenges them to spot the errors in a passage describing the structure and properties of this molecule. This reminds them of the bilayer arrangement, with the hydrophilic phosphate heads protruding outwards into the aqueous solutions on the inside and the outside of the cell. In a link to some upcoming lessons on the transport mechanisms, the students will learn that only small, non-polar molecules can move by simple diffusion and that this is through the tails of the bilayer. This introduces the need for transmembrane proteins to allow large or polar molecules to move into the cell by facilitated diffusion and active transport. Proteins that act as receptors as also introduced and an opportunity is taken to make a link to topic 9 so that students can understand how hormones or drugs will bind to target cells in this way and cause the release of cAMP on the interior of the cell. Moving forwards, the structure of cholesterol is covered and students will learn that this hydrophobic molecule sits in the middle of the tails and therefore acts to regulate membrane fluidity. The final part of the lesson challenges the students to apply their newly-acquired knowledge to a series of questions where they have to explain why proteins may have moved when two cells are used and to suggest why there is a larger proportion of these proteins in the inner mitochondrial membrane than the outer membrane.

This detailed and engaging lesson describes how the passive transport of water molecules is brought about by osmosis. The PowerPoint and accompanying resources have been designed to cover the second part of specification point 4.2 (ii) as detailed in the Edexcel A-level Biology B specification and water potential is included throughout which will help students to prepare for core practical 6 It’s likely that students will have used the term concentration in their osmosis definitions at GCSE, so the aim of the starter task is to introduce water potential to allow students to begin to recognise osmosis as the movement of water molecules from a high water potential to a lower potential, with the water potential gradient. Time is taken to describe the finer details of water potential to enable students to understand that 0 is the highest value (pure water) and that this becomes negative once solutes are dissolved. Exam-style questions are used throughout the lesson to check on current understanding as well as prior knowledge checks which make links to previously covered topics such as the lipid bilayer of the cell membrane. The remainder of the lesson focuses on the movement of water between cells and a solution when these animal and plant cells are suspended in hypotonic, hypertonic or isotonic solutions.

This detailed lesson describes the pressure changes that occur during the cardiac cycle and explains how ECG traces can be interpreted. The PowerPoint and accompanying resources have been designed to cover points 4.4 (iii) & (v) of the Edexcel A-level Biology B specification and focuses on the importance of the valves in ensuring unidirectional movement of blood during the cycle. The start of the lesson introduces the cardiac cycle as well as the key term systole, so that students can immediately recognise that the three stages of the cycle are atrial and ventricular systole followed by diastole. Students are challenged on their prior knowledge of the structure of the heart as they have to name and state the function of an atrioventricular and semi-lunar valve from an internal diagram. This leads into the key point that pressure changes in the chambers and the major arteries results in the opening and closing of these sets of valves. Students are given a description of the pressure change that results in the opening of the AV valves and shown where this would be found on the graph detailing the pressure changes of the cardiac cycle. They then have to use this as a guide to write descriptions for the closing of the AV valve and the opening and closing of the semi-lunar valves and to locate these on the graph. By providing the students with this graph, the rest of the lesson can focus on explaining how these changes come about. Students have to use their current and prior knowledge of the chambers and blood vessels to write 4 descriptions that cover the cardiac cycle. The final part of the lesson covers the changes in the volume of the ventricle. The remainder of the lesson focuses on the ECG and explains how these traces can be interpreted to diagnose heart problems. A quiz competition is used to introduce the reference points of P, QRS and T on a normal sinus rhythm before time is taken to explain their representation with reference to the cardiac cycle. Moving forwards, a SPOT the DIFFERENCE task is used to challenge the students to recognise differences between sinus rhythm and some abnormal rhythms including tachycardia and atrial fibrillation. Bradycardia is used as a symptom of sinus node disfunction and the students are encouraged to discuss this symptom along with some others to try to diagnose this health problem.

This lesson describes how passive transport is brought about (simple) diffusion and facilitated diffusion. The PowerPoint and accompanying resources have been designed to cover the first part of specification point 4.2 (ii) of the Edexcel A-level Biology B specification but also covers 4.2 (iii) as the relationship between the properties of a molecule and the method by which they are transported is discussed. The structure of the cell surface membrane was described in the previous lesson, so this lesson has been written to include continual references to the content of that lesson. This enables links to be made between the movement across a cell membrane with the concentration gradient, the parts of the membrane that are involved and any features that may increase the rate at which the molecules move. A series of questions about the alveoli are used to demonstrate how a large surface area, a short diffusion distance and the maintenance of a steep concentration gradient will increase the rate of simple diffusion. One of two quick quiz rounds is then used to introduce temperature and size of molecule as two further factors that can affect simple diffusion. The remainder of the lesson focuses on facilitated diffusion and describes how transmembrane proteins are needed to move small, polar or large molecules from a high concentration to a lower concentration across a partially permeable membrane

This engaging lesson describes the myogenic stimulation of the heart and focuses on the roles of the SAN, AVN and bundle of His. The PowerPoint and accompanying resources have been designed to cover the point 4.4 (iv) of the Edexcel A-level Biology B specification but also describes the role of the Purkyne fibres. The lesson begins with the introduction of the SAN as the natural pacemaker and then time is given to study each step of the conduction of the impulse as it spreads away from the myogenic tissue in a wave of excitation. The lesson has been written to make clear links to the cardiac cycle and the structure of the heart and students are challenged on their knowledge of this system from earlier in the topic. Moving forwards, students are encouraged to consider why a delay would occur at the AVN and then they will learn that the impulse is conducted along the Bundle of His to the apex so that the contraction of the ventricles can happen from the bottom upwards. The structure of the cardiac muscle cells is discussed and the final task of the lesson challenges the students to describe the conducting tissue, with an emphasis on the use of key terminology.

This fully-resourced lesson describes the roles of the platelets and plasma proteins in the sequence of events that lead to blood clotting. The engaging PowerPoint and accompanying resources have been primarily designed to cover the content detailed in point 4.4 (viii) of the Edexcel A-level Biology B specification and includes descriptions of the roles of thromboplastin, thrombin and fibrin but time has also been taken to look at haemophilia as a sex-linked disease so that students are prepared for topic 8 (genetic variation). The lesson begins with the introduction of clotting factors as integral parts of the blood clotting process and explains that factor III, thromboplastin, needs to be recalled as well as the events that immediately precede and follows its release. Students will learn how damage to the lining and the exposure of collagen triggers the release of this factor and how a cascade of events then results. Quick quiz rounds and tasks are used to introduce the names of the other substances involved which are prothrombin, thrombin, fibrinogen and fibrin. In a link to the upcoming topic of proteins, students will understand how the insolubility of fibrin enables this mesh of fibres to trap platelets and red blood cells and to form the permanent clot. The final part of the lesson introduces haemophilia as a sex-linked disease and students are challenged to apply their knowledge to an unfamiliar situation as they have to write genotypes and determine phenotypes before explaining why men are more likely to suffer from this disease than women.

This detailed lesson describes the role of haemoglobin in the transport of respiratory gases and compares the dissociation curves for foetal and adult haemoglobin. The PowerPoint and accompanying resource have been designed to cover points 4.5 (i), (ii) and (iv) of the Edexcel A-level Biology B specification. The structure of haemoglobin was covered during topic 1, so the start of the lesson acts as a prior knowledge check where the students are challenged to recall that it is a globular protein which consists of 4 polypeptide chains. A series of exam-style questions are then used to challenge them to make the link between the solubility of a globular protein and its role in the transport of oxygen from the alveoli to the respiring cells. Moving forwards, the students will learn that each of the 4 polypeptide chains contains a haem group with an iron ion attached and that it is this group which has a high affinity for oxygen. Time is taken to discuss how this protein must be able to load (and unload) oxygen as well as transport the molecules to the respiring tissues. Students will plot the oxyhaemoglobin dissociation curve and the S-shaped curve is used to encourage discussions about the ease with which haemoglobin loads each molecule. At this point, foetal haemoglobin and its differing affinity of oxygen is introduced and students are challenged to predict whether this affinity will be higher or lower than adult haemoglobin and to represent this on their dissociation curve. The remainder of the lesson looks at the different ways that carbon dioxide is transported around the body that involve haemoglobin. Time is taken to look at the dissociation of carbonic acid into hydrogen ions so that students can understand how this will affect the affinity of haemoglobin for oxygen in an upcoming lesson on the Bohr effect.

This lesson describes the relationship between the structure and function of the xylem and phloem in transport. The engaging and detailed PowerPoint and accompanying resources have been designed to cover point 4.7 (i) of the Edexcel A-level Biology B specification. The lessons begins by challenging the students to identify the substances that a plant needs for the cellular reactions, where they are absorbed and where these reactions occur in a plant. The aim of this task is to get the students to recognise that water and mineral ions are absorbed in the roots and needed in the leaves whilst the products of photosynthesis are in the leaves and need to be used all over the plant. Students will be reminded that the xylem and phloem are part of the vascular system responsible for transporting these substances and then the rest of the lesson focuses on linking structure to function. A range of tasks which include discussion points, exam-style questions and quick quiz rounds are used to describe how lignification results in the xylem as a hollow tube of xylem cells to allow water to move as a complete column. They will also learn that the narrow diameter of this vessel allows capillary action to move water molecules up the sides of the vessel. The same process is used to enable students to understand how the structures of the companion cells allows assimilates to be loaded before being moved to the sieve tube elements through the plasmodesmata.

This engaging lesson describes how the structure of the mammalian lung is adapted for rapid gaseous exchange. The PowerPoint has been designed to cover point 2.1 (iii) of the Pearson Edexcel A-level Biology A specification and focuses on the essential features of the alveolar epithelium as well as the mechanism of ventilation to maintain a steep concentration gradient for the simple diffusion of oxygen and carbon dioxide. Gas exchange at the alveoli is a topic that was covered at GCSE and considered during the previous lessons in topic 2.1 so this lesson has been written to challenge the recall of that knowledge and then to build on it. The main focus of the first half of the lesson is the type of epithelium found lining the alveoli and students will discover that a single layer of flattened cells known as simple, squamous epithelium acts to reduce the diffusion distance. The following features of the alveolar epithelium are also covered: Surface area Moist lining Production of surfactant The maintenance of a steep concentration gradient is the role of the respiratory system and the next part of the lesson focuses on the diaphragm and intercostal muscles. As the mechanism of inhalation is a cascade of events, the details of this process are covered in a step by step format using bullet points. At each step, time is taken to discuss the key details which includes an introduction to Boyle’s law that reveals the inverse relationship between volume and pressure. It is crucial that students are able to describe how the actions of the diaphragm, external intercostal muscles and ribcage result in an increased volume of the thoracic cavity and a subsequent decrease in the pressure, which is below the pressure outside of the body. At this point, their recall of the structures of the mammalian gas exchange system is tested, to ensure that they can describe the pathway taken by air when moving into the lungs.