This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topics P4 and P5 (Waves, Light and the Electromagnetic spectrum) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Define and use the terms frequency, wavelength, amplitude, period and wave velocity as applied to waves Describe the difference between longitudinal and transverse waves by referring to sound and EM waves Recall and use the two equations to calculate wave speed Describe how to measure the velocity of sound in air and ripples on water surfaces Explain how waves will be refracted at a boundary in terms of the change in direction and speed Recall that the EM waves are transverse and travel at the same speed in a vacuum Recall the main groupings of the EM spectrum Recall the potential danger associated with EM waves with increasing frequency Describe some uses of the EM waves Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic P3 (Conservation of energy) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Recall and use the equation to calculate the change in gravitational potential energy Recall and use the equation to calculate the change in kinetic energy of a moving object Explain what is meant by the conservation of energy Analyse the way energy is stored when a system changes Explain how mechanical processes become wasteful Explain ways of reducing unwanted energy transfer Recall and use the equation to calculate efficiency Describe the main energy sources available for use on Earth Explain patterns and trends in the use of energy resources Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is an engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 6 (Waves) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Transverse and longitudinal waves Properties of waves Reflection of waves Sound waves Waves for detection and exploration Types of electromagnetic waves Properties of electromagnetic waves Visible light The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Should you WAVE goodbye” where they have to determine whether a passage about waves is 100% correct or not whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is a detailed and engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Waves) of the Pearson Edexcel IGCSE Physics 9-1 specification (4PH1) for first assessment in June 2019. The specification points that are covered in this revision lesson include: Use the following units: degree (°), hertz (Hz), metre (m), metre/second (m/s) and second (s) Explain the difference between longitudinal and transverse waves Know the definitions of amplitude, frequency, wavelength and period of a wave Know and use the relationship between the speed, frequency and wavelength of a wave Use the relationship between frequency and time period Explain that all waves can be reflected and refracted Know that light is part of a continuous electromagnetic spectrum that includes radio, microwave, infrared, visible, ultraviolet, x-ray and gamma ray radiations and that all these waves travel at the same speed in free space Know the order of the electromagnetic spectrum in terms of decreasing wavelength and increasing frequency, including the colours of the visible spectrum Explain some of the uses of electromagnetic radiations Draw ray diagrams to illustrate refraction Know and use the relationship between refractive index, angle of incidence and angle of refraction Describe the role of total internal reflection in transmitting information along optical fibres and in prisms Explain the meaning of critical angle c Know and use the relationship between critical angle and refractive index Know that sound waves are longitudinal waves which can be reflected and refracted Know that the frequency range for human hearing is 20–20 000 Hz Understand how the loudness of a sound relates to the amplitude of vibration of the source The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Should you WAVE goodbye” where they have to decide whether a passage about a sub-topic of waves is completely correct whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual International GCSE exams

This is an engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 1 (General Physics) of the CIE IGCSE Physics (0625) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: CORE Define speed and calculate average speed from total distance divided by total time Plot and interpret a speed-time graph or a distance-time graph Recognise from the shape of a speed-time graph when a body is at rest, moving at a constant speed or changing speed Calculate the area under a speed-time graph to work out the distance travelled for motion with constant acceleration Show familiarity with the idea of the mass of a body State that weight is a gravitational force Distinguish between mass and weight Recall and use the equation W = mg Recall and use the equation density = mass divided by volume Understand friction as the force between two surfaces which impedes motion and results in heating Calculate moment using the product force × perpendicular distance from the pivot Identify changes in kinetic, gravitational potential, chemical, elastic (strain), nuclear and internal energy that have occurred as a result of an event or process Recognise that energy is transferred during events and processes, including examples of transfer by forces (mechanical working), by electrical currents (electrical working), by heating and by waves Apply the principle of conservation of energy to simple examples Describe how electricity or other useful forms of energy may be obtained from a range of sources Show a qualitative understanding of efficiency Demonstrate understanding that work done = energy transferred Relate (without calculation) power to work done and time taken, using appropriate examples SUPPLEMENT Distinguish between speed and velocity Define and calculate acceleration Understand deceleration as a negative acceleration Describe, and use the concept of, weight as the effect of a gravitational field on a mass State Hooke’s Law and recall and use the expression F = k x, where k is the spring constant Apply the principle of moments to different situations Understand that vectors have a magnitude and direction The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Are you the KING of the KINGDOMS” where they have to name the kingdoms involved based on a feature whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual IGCSE exam

This revision lesson contains a wide range of activities that will challenge the students on their knowledge and understanding of the content detailed in topic 3 (Conservation of energy) of the Pearson Edexcel GCSE Physics specification. These activities include exam style questions which will allow the students to assess their progress against the clearly explained answer. There is also a quiz that runs throughout the course of the lesson and this has been designed to maintain engagement and motivation. The following specification points have been covered in this lesson: Recall and use the equation to calculate the gravitational potential energy Recall and use the equation to calculate the kinetic energy Explain what is meant by the conservation of energy Explain that mechanical transfers become wasteful when energy is dissipated to the surroundings Explain ways of reducing unwanted energy transfers Recall and use the equation to calculate efficiency Describe the main energy sources available for use on Earth and explain their patterns and trends in the use of energy resources

An engaging lesson presentation (43 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit P5 (Energy) of the OCR Gateway A GCSE Combined Science specification The topics that are tested within the lesson include: Conservation of energy Efficiency Energy transfer by heating Mechanical energy transfers Students will be engaged through the numerous activities including quiz rounds like “The TRANSFER market” whilst crucially being able to recognise those areas which need further attention

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Module P1 (Matter) of the OCR Gateway A GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Describe how the atomic model has changed over time Define density Measure length, volume and mass to calculate density Explain the differences in density between the different states of matter in terms of the arrangements of atoms and molecules Describe how physical changes differ from chemical changes Define the term specific heat capacity and distinguis between this term and specific latent heat Carry out calculations to apply the equations involving specific heat capacity and specific latent heat Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the sub-topics found within Topic P10 (Electricity and their circuits) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Draw and use electric circuit diagrams Describe the difference between series and parallel circuits Recall that an ammeter is set up in series and a voltmeter is set up in parallel Explain that the electric current is the rate of flow of charge Recall and use the equation connecting potential difference, current and resistance Calculate the current, potential difference and resistance in series and parallel circuits Describe power as the energy transferred per second and is measured in Watts Describe the differences between alternating and direct current Recall that mains electricity uses alternating current and has a frequency of 50Hz Explain the difference between the function of the neutral and live wires Explain the function of the earth wire and fuses in ensuring safety Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This engaging revision resource has been written with the sole aim of challenging students on their knowledge of both the Core and Supplement sections of TOPIC 2 of the Cambridge IGCSE Physics specification. The resource includes an engaging PowerPoint (68 slides) and accompanying worksheets, some of which are differentiated. The wide range of activities in the lesson which include exam questions with explained answers and quiz competitions will motivate the students whilst they evaluate and assess their knowledge of the content and recognise those areas which will require further attention. The lesson has been designed to cover as many parts of the topic as possible, but the following sub-topics have been given a particular focus: The properties of solids, liquids and gases Conduction, convection and radiation Melting and boiling points Boiling vs evaporation Specific latent heat The structure and action of liquid-in-glass thermometers The use of thermocouples Specific heat capacity The mathematical elements of the topic are covered throughout the lesson and students are given helpful hints to support them in structuring their answers. This resource can be used at the end of the topic or in the lead up to the mocks or the actual IGCSE terminal examinations.

This fully-resourced REVISION lesson has been written to challenge the students on their knowledge of the content of topic 5 Solids, liquids and gases) of the Pearson Edexcel International GCSE Physics specification. The engaging PowerPoint and accompanying resources will motivate the students whilst they assess their understanding of the content and identify any areas which may require further attention. The wide range of activities have been written to cover as much of the topic as possible but the following specification points have been given particular focus: Using the correct units Converting between the Kelvin and degrees Celsius scales Explain the qualitative relationship between pressure and Kelvin temperature Use the relationship between pressure and Kelvin temperature Know and use the equations for density and pressure Design an experiment to investigate density Know the meaning of the specific heat capacity Use the equation for change in thermal energy Quiz rounds such as “SAY WHAT YOU SEE” and “YOU DO THE MATH” are used to test the students on their knowledge of key terms as well as numerical facts

This fully-resourced revision lesson challenges the students on their knowledge of the content detailed in topic 3 (Particle model of matter) of the AQA GCSE Physics specification. The wide range of activities which include exam questions with clear explanations will allow them to assess their understanding of the content and to recognise those areas which require further attention. The lesson has been designed to cover as much of the topic as possible but the following specification points have been given particular attention: Recall and apply the equation to calculate density Explaining differences in density between states of matter Internal energy and the result of heating the particles in a system Applying the equation to calculate the specific heat capacity Understanding that temperature does not change during changes of state Applying the equation to calculate the specific latent heat Explaining the qualitative relationship between the temperature of a gas and its pressure Applying the equation that links pressure, volume and a constant The engaging PowerPoint guides students on the use of key mathematical skills to aid success with the various calculations

This is a fully-resourced revision lesson that has been written to include a wide range of activities that challenge the students on their knowledge of astrophysics as detailed in topic 8 of the Pearson Edexcel IGCSE Physics specification. The numerous quiz rounds which include “Shine a LIGHT on any ERRORS” will engage and motivate their students whilst they assess their understanding of the content and recognise any areas that require further attention. The lesson has been designed to include as many of the specification points as possible but the following have been given particular attention: Understanding of the terms Solar system, galaxy and universe Gravitational field strength varies on different planets Gravitational force causes the Moon to orbit the Earth and the planets to orbit the Sun Use the relationship between orbital speed, orbital radius and time period Evolution of stars of a similar mass to our Sun and of stars with larger masses The evidence that supports the Big Bang theory The change in the frequency and wavelength of a wave if the source of the wave is moving in relation to the observer Red-shift as evidence of an expanding universe This topic contains a number of principles or theories which can be poorly understood by students so extra time has been taken to guide them in the formation of descriptions and explanations.

This revision lesson has been filled with activities that will challenge the students on their knowledge and understanding of the content detailed in topic 9 of the Pearson Edexcel GCSE Physics specification. The wide range of activities in the engaging PowerPoint and accompanying resources will check on the knowledge of the forces and their effects topic and allow the students to recognise those areas which need further attention before the mock or terminal GCSE exams. This resource has been designed to cover as much of topic 9 as possible but the following points have received particular attention: What happens when objects can interact at a distance without contact What happens when objects can interact by contact Explain the difference between vector and scalar quantities using examples Draw free body diagrams Recall and use the equation to calculate the moment of a force Recall and use the principle of moments in situations where rotational forces are in equilibrium Explain ways of reducing unwanted energy transfer through lubrication The main task of the lesson which challenges students to use the principle of moments has been differentiated so that differing abilities can access the work