This fully-resourced revision lesson consists of an engaging PowerPoint and differentiated resources which together challenge the students on their knowledge of the Key concepts in Physics, which are detailed in topic 1 of the Pearson Edexcel GCSE Physics specification . The content in this topic is particularly important because it will be assessed in both paper 1 and paper 2 of the terminal exams. The lesson has been filled with a wide range of activities which test the following specification points: Recall and use the SI units for physical quantities Recall and use multiples and sub-multiples of units Be able to convert between different units Use significant figures and standard form# To fall in line with the heavy mathematical content of this specification, the main task of the lesson challenges the students to carry out a range of calculations where they have to convert between units and leave their answers in a specific form.

This revision lesson has been filled with activities that will challenge the students on their knowledge and understanding of the content detailed in topic 8 (Energy - forces doing work) of the Pearson Edexcel GCSE Physics specification. The wide range of activities in the engaging PowerPoint and accompanying resources will check on the knowledge of this topic and allow the students to recognise those areas which need further attention before the mock or terminal GCSE exams. This resource has been designed to cover as much of topic 8 as possible but the following points have received particular attention: Describe how to measure the work done by a force Understand that work done is equal to energy transferred Recall and use the equation to calculate work done Calculate the changes in energy involved when a system is changed by work done by forces Recall and use the equation to calculate gravitational potential energy Recall and use the equation to calculate kinetic energy Explain how energy is dissipated so that it is stored in less useful ways Define power as the rate at which energy is transferred and that 1 watt is equal to one joule per second Recall and use the equation to calculate power Recall and use the equation to calculate efficiency The mathematical content of this specification and this topic is heavy and in line with this lots of calculated-based tasks are included and all of the answers are explained in steps so students can assess their progress The main task of the lesson which challenges students to use the principle of moments has been differentiated so that differing abilities can access the work

This is a highly engaging, detailed and fully-resourced revision lesson which has been designed to test the students on their knowledge and understanding of topic 6 (Radioactivity) of the Pearson Edexcel GCSE Physics specification. The PowerPoint and accompanying resources contain a wide range of resources which include exam-style questions with fully-explained answers, differentiated tasks and quick quiz competitions. The students will be motivated by the range of tasks whilst crucially recognising those areas of the specification which require some extra time before the exams The following specification points are covered in this lesson: Describe the structure of atom and recall the typical size Recall the relative masses and charges of the subatomic particles and use the number of protons and electrons to explain why atoms are neutral Describe the structure of the nuclei of an isotope Explain what is meant by background radiation and recall sources Describe methods for measuring and detecting radioactivity Describe the process of beta minus and beta plus decay Write and balance nuclear decay equations Explain the effects on the proton and nucleon number as a result of decay Recall that the unit of radioactivity is Bq Use the concept of half-life to carry out calculations Describe the use of isotopes in PET scanners Describe the differences between nuclear fission and fusion Explain how the fission of U-235 produces two daughter nuclei, two or three neutrons and releases energy Describe the advantages and disadvantages of nuclear energy Explain why nuclear fusion cannot happen at low temperatures and pressures It is estimated that it will take in excess of 2 hours of GCSE teaching to cover the detail of this lesson and it can be used for effective revision at the end of the topic or in the lead up to mock or terminal exams.

This fully-resourced revision lesson contains a wide range of activities that will challenge the students on their knowledge and understanding of the content detailed in the CORE and SUPPLEMENT sections of topic P2 (Work, energy and power) of the CIE IGCSE Combined Science specification. These activities include exam style questions which will allow the students to assess their progress against the clearly explained answers. There is also a quiz that runs throughout the course of the lesson and this has been designed to maintain engagement and motivation. The following specification points have been covered in this lesson: Recall and use the equation to calculate work done Demonstrate an understanding that work done = energy transferred Understand that an object may have energy due to its motion or position Recall and use the equations to calculate kinetic and gravitational potential energy Recognise the ways that energy is transferred during events and processes Apply the conservation of energy Recall and use the equation to calculate power Distinguish between renewable and non-renewable sources of energy Describe how electricity is obtained from the tides, hydroelectric power and nuclear fission One of the main tasks of the lesson, which challenges the students to apply the law of the conservation of energy, has been differentiated so that differing abilities can access the work

This is a fully-resourced revision lesson which covers the content detailed in the CORE & SUPPLEMENT sections of topics P5 & P6 (Electrical quantities and electric circuits) of the CIE IGCSE Combined Science specification. The engaging PowerPoint and accompanying resources contain a wide range of activities which include exam-style questions with clearly explained answers, differentiated tasks and quiz competitions to allow students to assess their understanding and to ultimately recognise those areas which need further consideration. The following specification points have been given particular attention in this lesson: The electrical symbols that represent the electrical components Describe the differences between series and parallel circuits Recall that a voltmeter is connected in parallel One volt is equal to one joule per coulomb Recall and use the equations that calculate charge, potential difference and power Recall that an ammeter is connected in series Calculate the currents, potential differences and resistances in series and parallel circuits Know the safety function of the fuse Understand that like charges repel and unlike charges attract This lesson has been designed to fall in line with the heavy mathematical content of the Physics specification with a number of calculation tasks and students are guided through the range of skills that they will have to employ

This fully-resourced revision lesson covers the CORE and SUPPLEMENT sections of topic P4 (Properties of waves, including light and sound) of the CIE IGCSE Combined Science specification. The engaging PowerPoint and acccompanying resource have been written to include a wide range of activities which include exam-style questions (with clearly explained answers), differentiated tasks and quick quiz competitions. These activities challenge the following specification points: State the meaning of speed, frequency, wavelength and amplitude Distinguish between transverse and longitudinal waves and give examples Describe how waves can undergo reflection and refraction and that the latter is caused by a change in the wave speed Recall and use the law of reflection Describe the main features of the EM spectrum State that all waves travel at the speed of light in a vacuum and recall this speed Describe the uses of the EM waves Describe the longitudinal nature of sound waves Recall and use the equation to calculate wave speed Describe how to measure the speed of sound in air and ripples on water surfaces Recall that sound waves can be ultrasound To fall in line with the greater mathematical content of the specification, there is a large emphasis on a range of mathematical skills in this lesson which includes the use of standard form. Due to the detail of this lesson, it is estimated that it will take in excess of 2 hours of IGCSE-allocated teaching time to cover the content and this allows this to be used at the end of the topic or in the lead up to mock or terminal examinations.

This fully-resourced revision lesson has been written to cover the major details of the electricity and circuits topic that can be assessed in the GCSE Physics and Combined Science (HT) exams. The engaging PowerPoint and accompanying resources contain a wide range of activities which include exam-style questions with clearly explained answers, differentiated tasks and quiz competitions to allow students to assess their understanding and to ultimately recognise those areas which need further consideration. The following points are covered in this revision lesson: The electrical symbols that represent the electrical components Describe the differences between series and parallel circuits Recall that a voltmeter is connected in parallel One volt is equal to one joule per coulomb Recall and use the equations that calculate energy transferred, charge, potential difference, power and electrical power Recall that an ammeter is connected in series Calculate the currents, potential differences and resistances in series and parallel circuits Explain how current varies with potential difference in resistors Know the functions of the wires in a plug and the safety features The main task of the lesson, which challenges the students to calculate the currents, potential differences and resistances in series and parallel circuits, is differentiated to allow students of differing abilities to access the work

This lesson has been written to act as a revision tool for students at the completion of topic 2.1 of the WJEC GCSE Physics specification or in the lead up to mock or terminal exams. The engaging PowerPoint and accompanying resources have been designed to include a wide range of activities to allow the students to assess their understanding and to recognise any areas which need extra attention. This specification is heavy in mathematical content and so a lot of opportunities are presented for a range of skills to be tested and the PowerPoint guides students through the application of these requirements such as rearranging the formula and converting between units. The following specification points have received a particular focus in this lesson: Motion using speed, velocity and acceleration Speed-time graphs Application of the equations to calculate speed and acceleration Using velocity-time graphs to calculate uniform acceleration and distance travelled Knowledge of the terms reaction time, thinking distance, braking distance and stopping distance The factors which affect these distances A number of quick quiz rounds, such as THE WHOLE DISTANCE, are used to maintain engagement and motivation and to challenge the students on their recall of important points.

This revision lesson is fully-resourced and differentiated to allow students of differing abilities to assess their understanding of topic 2.4 (Further motion concepts) of the WJEC GCSE Physics specification. The engaging and detailed PowerPoint and accompanying resources contain exam-style questions, quick tasks, discussion points and a quiz competition which check on the following specification points: The qualitative relationship between mass and velocity in the calculation of momentum Application of the law of the conservation of momentum to perform calculations involving collisions Applying the kinetic energy equation to compare the size of this energy store before and after an interaction Newton’s second law in the form force = change in momentum over time Using equations to model the motion of an object The principle of moments To fall in line with the specification, there is a big emphasis on mathematical skills in this lesson and students are given guidance and assistance to ensure that they can access the work

This is a fully-resourced lesson which uses exam-style questions, quiz competitions, quick tasks and discussion points to challenge students on their understanding of topics P5 - P7, that will assessed on PAPER 6. It has been specifically designed for students on the AQA GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the fundamentals are known and understood. The lesson has been written to cover as many specification points as possible but the following sub-topics have been given particular attention: Factors affecting the thinking, braking and stopping distance The 7 recall and apply equations tested in PAPER 6 Using velocity-time graphs to calculate accelerations The motions represented by the different lines on a velocity-time graph Resultant forces Speed and velocity as scalar and vector quantities Converting between units Sound as an example of a longitudinal wave The EM spectrum The meaning of amplitude, wavelength, frequency and period Contact and non-contact forces Attraction and repulsion in magnets Magnetic fields The extension of a spring In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for extra support when they are unable to begin a question. Step-by-step guides have also been written into the lesson to walk students through some of the more difficult concepts such as calculating acceleration and the mathematical elements Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 2/3 teaching hours to complete the tasks and therefore this can be used at different points throughout the course as well as acting as a final revision before the PAPER 6 exam.

This is a fully-resourced lesson which uses exam-style questions, engaging quiz competitions, quick tasks and discussion points to challenge students on their understanding of the content of topics P1 - P6, that will assessed on PAPER 5. It has been specifically designed for students on the Edexcel GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the fundamentals are known and understood. The lesson has been written to cover as many specification points as possible but the following sub-topics have been given particular attention: Factors affecting thinking and braking distance The 7 recall and apply equations tested in PAPER 5 The units associated with the physical factors challenged in PAPER 5 Recognising the motions represented by different motions on velocity-time graphs Using a velocity-time graph to calculate acceleration Resultant forces Sound waves as longitudinal waves The electromagnetic waves Using significant figures and standard form The relative charges and masses of the particles in an atom Recognising isotopes Using the half-life of radioactive isotopes The development of the atomic model In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for extra support when they are unable to begin a question. Step-by-step guides have also been incorporated into the lesson to walk through students through some of the more difficult concepts such as half-life calculations. Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 3 teaching hours to complete the tasks and therefore this can be used at different points throughout the course as well as acting as a final revision before the PAPER 5 exam.

This revision lesson focuses on the properties of waves and the process of refraction as detailed in topic 6 of the AQA physics and combined specifications. Each task in the PowerPoint and accompanying resources challenges the students on their understanding of the key terms frequency, period, wavelength, amplitude, transverse and longitudinal, and reminds them how to answer refraction questions by using explanations that involve density, speed and the change in direction of the light wave.

An engaging lesson presentation (78 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within module P4 (Waves and radioactivity) of the OCR Gateway A GCSE Combined Science specification. The topics that are tested within the lesson include: Waves and their properties Wave velocity Electromagnetic waves Atoms and isotopes Alpha, beta, gamma Nuclear equations Half-life Radiation and the human body Students will be engaged through the numerous activities including quiz rounds like “Tell EM the Word” and “Take the HOTSEAT” whilst crucially being able to recognise those areas which need further attention