This is the full resource pack for an assessment for KS4 students who are studying saturation, vegetable oils, bromine water test, uses of halogens, and oils in foods. This resource pack comes with several parts; 1. PowerPoint presentation to introduce the task, which includes the questions and level ladder. 2. Word document task printout for the students to stick in their books. 3. Word document printout containing just the level ladder so that students can tick off their progress as they go, this could also be suitable for peer/teacher assessment. 4. Word document containing both the task and the level ladder, by combining these two sheet you can save printing however the work sheet is very ‘busy’ and may be too much to take in at one go for some learners. 5. Word document containing the answers to the task questions and some notes for the teacher regarding common mistakes and hints to help push the students 6. Word document writing frame for students who struggle to get started and would benefit from extra support/. 7. Excel spreadsheet that can be used to automatically generate extended written feedback including improvement strategies for the teacher to give the students. A guide on how to use this resource can be freely accessed at https://www.tes.com/teaching-resource/the-automarker-11191496 This task is suitable for students at KS4 Grade E-A*, I have left the 'old' grading system on these resources however you can easily overwrite these for the new 1-9 grading system.

This is the full resource pack for an assessment for KS3/KS4 students who are studying magnets, electricity, scientific investigations, electromagnets, data analysis, graph plotting, writing conclusions and evaluations. This resource pack comes with several parts; 1. PowerPoint presentation to introduce the task and relevant background information. 2. Word document printout for the students to stick in their books. 3. Word document printout with a level ladder on so that the students work can be assessed, this has two columns so that the students can tick off the levels as they go and then the teacher can tick off the achieved tasks too. 4. Excel spreadsheet that can be used to automatically generate extended written feedback including improvement strategies for the teacher to give the students. I have included two spreadsheets, one focuses specifically on the graph part of the assessment, the second spreadsheet includes a few comments for the graph however focuses mainly on the conclusion and evaluation aspect of this assessment. A guide on how to use this resource can be freely accessed at https://www.tes.com/teaching-resource/the-automarker-11191496 This was originally a KS3 assessment on method writing, however I have expanded this to a full investigation which could be used for KS3 students and KS4 students preparing for coursework. The levels are numerical however these could be adapted to whatever you need.

This is the free version of an assessment for KS3 students who are studying energy, electricity, electrical generators, power stations, renewable energy, and energy transfers. It may also be suitable for KS4 students. I have also produced a resource pack available to purchase from TES at https://www.tes.com/teaching-resource/generating-electricity-project-quality-mark-assessment-full-resource-pack-11381218 This resource pack comes with several parts; 1. PowerPoint presentation to introduce the task and relevant background information. 2. Word document printout for the students to stick in their books. 3. Word document printouts with a level ladder on so that the students can self/peer assess the work, there is also a column so the teacher can tick off the achieved criteria. This currently has the KS3 levels of 3-7 on however this could be altered. 4. Excel spreadsheet that can be used to automatically generate extended written feedback including improvement strategies for the teacher to give the students. A guide on how to use this resource can be freely accessed at https://www.tes.com/teaching-resource/the-automarker-11191496

This is the full resource pack for an assessment for KS3 students who are studying energy, electricity, electrical generators, power stations, renewable energy, and energy transfers. It may also be suitable for KS4 students. This resource pack comes with several parts; 1. PowerPoint presentation to introduce the task and relevant background information. 2. Word document printout for the students to stick in their books. 3. Word document printouts with a level ladder on so that the students can self/peer assess the work, there is also a column so the teacher can tick off the achieved criteria. This currently has the KS3 levels of 3-7 on however this could be altered. 4. Excel spreadsheet that can be used to automatically generate extended written feedback including improvement strategies for the teacher to give the students. A guide on how to use this resource can be freely accessed at https://www.tes.com/teaching-resource/the-automarker-11191496

This is an amalgamation of several TES resources I have collected over the years, I have combined them together to make a checklist for revising C2 additional chemistry that can be easily printed as a booklet (only 3 pages)

This is a resource pack for the Reacting Masses calculations. I have made a range of resources for the calculations that AQA GCSE students will be expected to complete for the new Chemistry specification (8462). The resources packs contain 1. PowerPoint showing the key stages/background information on the calculation. 2. Word document with a printout showing the stages to complete the calculation. 3. Word document worksheet with some questions for the students to attempt, whenever possible these are based on exam questions. 4. WMV video clip this format is playable in most programs, such as RealPlayer, MPlayer, Windows Media Player, and the VLC Media Player. The video clip goes through the stages of the calculations on the worksheet, this is extremely useful for students (and teachers) who are struggling to see where the answer comes from. 5. Word document containing just the answers. There are a total of 8 resource packs for the Reacting Masses calculations. If you find the Resource Packs helpful and want more of the same the rest of the resource packs can be purchased from TES at: 1. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-1-free-sample-11356990 2. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-2-11357025 3. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-3-11357027 4. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-4-11357030 5. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-5-11357033 6. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-6-11357034 7. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-7-11357036 8. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-8-11357041 I have also made a bundle which is available for a reduced price containing all of the resource pack for this type of calculation. This is available to purchase at: https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-bundle-11357050

I have made a range of resources for the calculations that AQA GCSE students will be expected to complete for the new Chemistry specification (8462). The resources packs contain 1. PowerPoint showing the key stages/background information on the calculation. 2. Word document worksheet with some questions for the students to attempt, whenever possible these are based on exam questions. 3. Word document with the questions on with space left for working out the answer. 4. WMV video clip this format is playable in most programs, such as RealPlayer, MPlayer, Windows Media Player, and the VLC Media Player. The video clip goes through the stages of the calculations on the worksheet, this is extremely useful for students (and teachers) who are struggling to see where the answer comes from. 5. Word document containing just the answers. There are a total of 13 resource packs for the balancing chemical equations calculations. If you find the Resource Packs helpful and want more of the same the rest of the resource packs can be purchased from TES at: 1. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-1-free-sample-11354804 2. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-2-11354808 3. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-3-11354813 4. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-4-11354814 5. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-5-11354818 6. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-6-11354822 7. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-7-11354823 8. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-8-11354825 9. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-9-11354826 10. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-10-11354830 11. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-11-11367403 12. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-12-11367404 13 https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-13-11367406 I have also made a bundle which is available for a reduced price containing all of the resource pack for this type of calculation. This is available to purchase at: https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-bundle-11354835

I have made a range of resources for the calculations that AQA GCSE students will be expected to complete for the new Chemistry specification (8462). The resources packs contain 1. PowerPoint showing the key stages/background information on the calculation. 2. Word document worksheet with some questions for the students to attempt, whenever possible these are based on exam questions. 3. Word document with the questions on with space left for working out the answer. 4. WMV video clip this format is playable in most programs, such as RealPlayer, MPlayer, Windows Media Player, and the VLC Media Player. The video clip goes through the stages of the calculations on the worksheet, this is extremely useful for students (and teachers) who are struggling to see where the answer comes from. 5. Word document containing just the answers. There are a total of 13 resource packs for the balancing chemical equations calculations. If you find the Resource Packs helpful and want more of the same the rest of the resource packs can be purchased from TES at: 1. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-1-free-sample-11354804 2. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-2-11354808 3. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-3-11354813 4. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-4-11354814 5. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-5-11354818 6. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-6-11354822 7. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-7-11354823 8. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-8-11354825 9. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-9-11354826 10. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-10-11354830 11. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-11-11367403 12. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-12-11367404 13 https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-13-11367406 I have also made a bundle which is available for a reduced price containing all of the resource pack for this type of calculation. This is available to purchase at: https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-bundle-11354835

I have made a range of resources for the calculations that AQA GCSE students will be expected to complete for the new Chem specification (8462). The resources packs contain 1. PowerPoint showing the key stages/background information on the calculation. 2. Word document worksheet with some questions for the students to attempt, whenever possible these are based on exam questions. 3. Word document with the questions on with space left for working out the answer. 4. WMV video clip this format is playable in most programs, such as RealPlayer, MPlayer, Windows Media Player, and the VLC Media Player. The video clip goes through the stages of the calculations on the worksheet, this is extremely useful for students (and teachers) who are struggling to see where the answer comes from. 5. Word document containing just the answers. There are a total of 13 resource packs for the balancing chemical equations calculations. If you find the Resource Packs helpful and want more of the same the rest of the resource packs can be purchased from TES at: 1. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-1-free-sample-11354804 2. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-2-11354808 3. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-3-11354813 4. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-4-11354814 5. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-5-11354818 6. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-6-11354822 7. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-7-11354823 8. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-8-11354825 9. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-9-11354826 10. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-10-11354830 11. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-11-11367403 12. https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-12-11367404 13 https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-13-11367406 I have also made a bundle which is available for a reduced price containing all of the resource pack for this type of calculation. This is available to purchase at: https://www.tes.com/teaching-resource/chemical-calculations-balancing-chemical-equations-bundle-11354835

These are question cards on light and sound and includes questions on light, reflection, refraction, dispersion, sound, waves, amplitude, volume etc. These are made to go with the Science Revision Board Game I made which I use with KS3 and KS4 students to revise for their end of unit tests or exams. The board game and some sample question cards are freely available at https://www.tes.com/teaching-resource/science-revision-board-game-free-version-11445205 If the game board isn’t quite how you’d like it, or if you want your own question cards you could download my ‘Make Your Own Revision Board Game Resource Pack’ which can be purchased at https://www.tes.com/teaching-resource/make-your-own-revision-board-game-resource-pack-11445322 For the teacher, this is quick and easy revision activity that requires a one-time set up and then it can be used time and time again! Very little effort is required by you and the students can happily spend all lesson playing the game (if you let them) leaving you free to do what you fancy! My students love it and I get chance to sit down with the students who need extra help, or catch up on a bit of marking. To get started: • Print the board game on white A3 paper. • Print the question cards on blue paper/card, cut them up and pop them in little bags. • Print the hazard cards on yellow paper/card, cut them up and pop them in little bags. • Laminate the board game (optional but makes the game last longer) • Get a little stash of counters or items that could be used as the player pieces e.g. coloured paper circles, novelty rubbers, little model etc • Get some dice. For a class of 30 I’ve found that 6 groups of 5 work quite well, therefore you’d need 6 game boards and 6 packs of cards. For each unit taught I’ve made my own quiz cards so the students can test themselves on the unit content, I have quite a few different units which I am in the processing of uploading to TES now. Keep your eyes peeled for the bundles I am putting together.

These are question cards on the human body and include questions on organs, organ systems, and health. These are made to go with the Science Revision Board Game I made which I use with KS3 and KS4 students to revise for their end of unit tests or exams. The board game and some sample question cards are freely available at https://www.tes.com/teaching-resource/science-revision-board-game-free-version-11445205 If the game board isn’t quite how you’d like it, or if you want your own question cards you could download my ‘Make Your Own Revision Board Game Resource Pack’ which can be purchased at https://www.tes.com/teaching-resource/make-your-own-revision-board-game-resource-pack-11445322 For the teacher, this is quick and easy revision activity that requires a one-time set up and then it can be used time and time again! Very little effort is required by you and the students can happily spend all lesson playing the game (if you let them) leaving you free to do what you fancy! My students love it and I get chance to sit down with the students who need extra help, or catch up on a bit of marking. To get started: • Print the board game on white A3 paper. • Print the question cards on blue paper/card, cut them up and pop them in little bags. • Print the hazard cards on yellow paper/card, cut them up and pop them in little bags. • Laminate the board game (optional but makes the game last longer) • Get a little stash of counters or items that could be used as the player pieces e.g. coloured paper circles, novelty rubbers, little model etc • Get some dice. For a class of 30 I’ve found that 6 groups of 5 work quite well, therefore you’d need 6 game boards and 6 packs of cards. For each unit taught I’ve made my own quiz cards so the students can test themselves on the unit content, I have quite a few different units which I am in the processing of uploading to TES now. Keep your eyes peeled for the bundles I am putting together.

These are question cards on Rocks and include questions on the rock types, igneous sedimentary, metamorphic, weathering, erosion, the rock cycle, the structure of the Earth. These may be suitable for Science and Geography lessons. These are made to go with the Science Revision Board Game I made which I use with KS3 and KS4 students to revise for their end of unit tests or exams. The board game and some sample question cards are freely available at https://www.tes.com/teaching-resource/science-revision-board-game-free-version-11445205 If the game board isn’t quite how you’d like it, or if you want your own question cards you could download my ‘Make Your Own Revision Board Game Resource Pack’ which can be purchased at https://www.tes.com/teaching-resource/make-your-own-revision-board-game-resource-pack-11445322 For the teacher, this is quick and easy revision activity that requires a one-time set up and then it can be used time and time again! Very little effort is required by you and the students can happily spend all lesson playing the game (if you let them) leaving you free to do what you fancy! My students love it and I get chance to sit down with the students who need extra help, or catch up on a bit of marking. To get started: • Print the board game on white A3 paper. • Print the question cards on blue paper/card, cut them up and pop them in little bags. • Print the hazard cards on yellow paper/card, cut them up and pop them in little bags. • Laminate the board game (optional but makes the game last longer) • Get a little stash of counters or items that could be used as the player pieces e.g. coloured paper circles, novelty rubbers, little model etc • Get some dice. For a class of 30 I’ve found that 6 groups of 5 work quite well, therefore you’d need 6 game boards and 6 packs of cards. For each unit taught I’ve made my own quiz cards so the students can test themselves on the unit content, I have quite a few different units which I am in the processing of uploading to TES now. Keep your eyes peeled for the bundles I am putting together.

These are question cards on the environment and include questions on plants, ecology, sampling techniques, food chains and animal adaptations. These are made to go with the Science Revision Board Game I made which I use with KS3 and KS4 students to revise for their end of unit tests or exams. The board game and some sample question cards are freely available at https://www.tes.com/teaching-resource/science-revision-board-game-free-version-11445205 If the game board isn’t quite how you’d like it, or if you want your own question cards you could download my ‘Make Your Own Revision Board Game Resource Pack’ which can be purchased at https://www.tes.com/teaching-resource/make-your-own-revision-board-game-resource-pack-11445322 For the teacher, this is quick and easy revision activity that requires a one-time set up and then it can be used time and time again! Very little effort is required by you and the students can happily spend all lesson playing the game (if you let them) leaving you free to do what you fancy! My students love it and I get chance to sit down with the students who need extra help, or catch up on a bit of marking. To get started: • Print the board game on white A3 paper. • Print the question cards on blue paper/card, cut them up and pop them in little bags. • Print the hazard cards on yellow paper/card, cut them up and pop them in little bags. • Laminate the board game (optional but makes the game last longer) • Get a little stash of counters or items that could be used as the player pieces e.g. coloured paper circles, novelty rubbers, little model etc • Get some dice. For a class of 30 I’ve found that 6 groups of 5 work quite well, therefore you’d need 6 game boards and 6 packs of cards. For each unit taught I’ve made my own quiz cards so the students can test themselves on the unit content, I have quite a few different units which I am in the processing of uploading to TES now. Keep your eyes peeled for the bundles I am putting together.

These are question cards on the Earth based upon the first half of AQA's unit C1.7 Changes in the Earth. This includes questions on the structure of the Earth, tectonic plates, continental drift, Alfred Wegener and rocks. These are made to go with the Science Revision Board Game I made which I use with KS3 and KS4 students to revise for their end of unit tests or exams. The board game and some sample question cards are freely available at https://www.tes.com/teaching-resource/science-revision-board-game-free-version-11445205 If the game board isn’t quite how you’d like it, or if you want your own question cards you could download my ‘Make Your Own Revision Board Game Resource Pack’ which can be purchased at https://www.tes.com/teaching-resource/make-your-own-revision-board-game-resource-pack-11445322 For the teacher, this is quick and easy revision activity that requires a one-time set up and then it can be used time and time again! Very little effort is required by you and the students can happily spend all lesson playing the game (if you let them) leaving you free to do what you fancy! My students love it and I get chance to sit down with the students who need extra help, or catch up on a bit of marking. To get started: • Print the board game on white A3 paper. • Print the question cards on blue paper/card, cut them up and pop them in little bags. • Print the hazard cards on yellow paper/card, cut them up and pop them in little bags. • Laminate the board game (optional but makes the game last longer) • Get a little stash of counters or items that could be used as the player pieces e.g. coloured paper circles, novelty rubbers, little model etc • Get some dice. For a class of 30 I’ve found that 6 groups of 5 work quite well, therefore you’d need 6 game boards and 6 packs of cards. For each unit taught I’ve made my own quiz cards so the students can test themselves on the unit content, I have quite a few different units which I am in the processing of uploading to TES now. Keep your eyes peeled for the bundles I am putting together.

These are question cards on diet and exercise this include questions on food types, nutrients, food tests, malnutrition and health. These are made to go with the Science Revision Board Game I made which I use with KS3 and KS4 students to revise for their end of unit tests or exams. The board game and some sample question cards are freely available at https://www.tes.com/teaching-resource/science-revision-board-game-free-version-11445205 If the game board isn’t quite how you’d like it, or if you want your own question cards you could download my ‘Make Your Own Revision Board Game Resource Pack’ which can be purchased at https://www.tes.com/teaching-resource/make-your-own-revision-board-game-resource-pack-11445322 For the teacher, this is quick and easy revision activity that requires a one-time set up and then it can be used time and time again! Very little effort is required by you and the students can happily spend all lesson playing the game (if you let them) leaving you free to do what you fancy! My students love it and I get chance to sit down with the students who need extra help, or catch up on a bit of marking. To get started: • Print the board game on white A3 paper. • Print the question cards on blue paper/card, cut them up and pop them in little bags. • Print the hazard cards on yellow paper/card, cut them up and pop them in little bags. • Laminate the board game (optional but makes the game last longer) • Get a little stash of counters or items that could be used as the player pieces e.g. coloured paper circles, novelty rubbers, little model etc • Get some dice. For a class of 30 I’ve found that 6 groups of 5 work quite well, therefore you’d need 6 game boards and 6 packs of cards. For each unit taught I’ve made my own quiz cards so the students can test themselves on the unit content, I have quite a few different units which I am in the processing of uploading to TES now. Keep your eyes peeled for the bundles I am putting together.

These are question cards on electricity and magnetism and include questions on electricity, circuits, magnets, magnetism, electromagnets. These are made to go with the Science Revision Board Game I made which I use with KS3 and KS4 students to revise for their end of unit tests or exams. The board game and some sample question cards are freely available at https://www.tes.com/teaching-resource/science-revision-board-game-free-version-11445205 If the game board isn’t quite how you’d like it, or if you want your own question cards you could download my ‘Make Your Own Revision Board Game Resource Pack’ which can be purchased at https://www.tes.com/teaching-resource/make-your-own-revision-board-game-resource-pack-11445322 For the teacher, this is quick and easy revision activity that requires a one-time set up and then it can be used time and time again! Very little effort is required by you and the students can happily spend all lesson playing the game (if you let them) leaving you free to do what you fancy! My students love it and I get chance to sit down with the students who need extra help, or catch up on a bit of marking. To get started: • Print the board game on white A3 paper. • Print the question cards on blue paper/card, cut them up and pop them in little bags. • Print the hazard cards on yellow paper/card, cut them up and pop them in little bags. • Laminate the board game (optional but makes the game last longer) • Get a little stash of counters or items that could be used as the player pieces e.g. coloured paper circles, novelty rubbers, little model etc • Get some dice. For a class of 30 I’ve found that 6 groups of 5 work quite well, therefore you’d need 6 game boards and 6 packs of cards. For each unit taught I’ve made my own quiz cards so the students can test themselves on the unit content, I have quite a few different units which I am in the processing of uploading to TES now. Keep your eyes peeled for the bundles I am putting together.

This is a resource pack for the Reacting Masses calculations. I have made a range of resources for the calculations that AQA GCSE students will be expected to complete for the new Chemistry specification (8462). The resources packs contain 1. PowerPoint showing the key stages/background information on the calculation. 2. Word document with a printout showing the stages to complete the calculation. 3. Word document worksheet with some questions for the students to attempt, whenever possible these are based on exam questions. 4. WMV video clip this format is playable in most programs, such as RealPlayer, MPlayer, Windows Media Player, and the VLC Media Player. The video clip goes through the stages of the calculations on the worksheet, this is extremely useful for students (and teachers) who are struggling to see where the answer comes from. 5. Word document containing just the answers. There are a total of 8 resource packs for the Reacting Masses calculations. If you find the Resource Packs helpful and want more of the same the rest of the resource packs can be purchased from TES at: 1. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-1-free-sample-11356990 2. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-2-11357025 3. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-3-11357027 4. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-4-11357030 5. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-5-11357033 6. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-6-11357034 7. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-7-11357036 8. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-8-11357041 I have also made a bundle which is available for a reduced price containing all of the resource pack for this type of calculation. This is available to purchase at: https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-bundle-11357050

This is a resource pack for the Reacting Masses calculations. I have made a range of resources for the calculations that AQA GCSE students will be expected to complete for the new Chemistry specification (8462). The resources packs contain 1. PowerPoint showing the key stages/background information on the calculation. 2. Word document with a printout showing the stages to complete the calculation. 3. Word document worksheet with some questions for the students to attempt, whenever possible these are based on exam questions. 4. WMV video clip this format is playable in most programs, such as RealPlayer, MPlayer, Windows Media Player, and the VLC Media Player. The video clip goes through the stages of the calculations on the worksheet, this is extremely useful for students (and teachers) who are struggling to see where the answer comes from. 5. Word document containing just the answers. There are a total of 8 resource packs for the Reacting Masses calculations. If you find the Resource Packs helpful and want more of the same the rest of the resource packs can be purchased from TES at: 1. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-1-free-sample-11356990 2. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-2-11357025 3. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-3-11357027 4. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-4-11357030 5. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-5-11357033 6. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-6-11357034 7. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-7-11357036 8. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-8-11357041 I have also made a bundle which is available for a reduced price containing all of the resource pack for this type of calculation. This is available to purchase at: https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-bundle-11357050

This is a resource pack for the Reacting Masses calculations. I have made a range of resources for the calculations that AQA GCSE students will be expected to complete for the new Chemistry specification (8462). The resources packs contain 1. PowerPoint showing the key stages/background information on the calculation. 2. Word document with a printout showing the stages to complete the calculation. 3. Word document worksheet with some questions for the students to attempt, whenever possible these are based on exam questions. 4. WMV video clip this format is playable in most programs, such as RealPlayer, MPlayer, Windows Media Player, and the VLC Media Player. The video clip goes through the stages of the calculations on the worksheet, this is extremely useful for students (and teachers) who are struggling to see where the answer comes from. 5. Word document containing just the answers. There are a total of 8 resource packs for the Reacting Masses calculations. If you find the Resource Packs helpful and want more of the same the rest of the resource packs can be purchased from TES at: 1. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-1-free-sample-11356990 2. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-2-11357025 3. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-3-11357027 4. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-4-11357030 5. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-5-11357033 6. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-6-11357034 7. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-7-11357036 8. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-8-11357041 I have also made a bundle which is available for a reduced price containing all of the resource pack for this type of calculation. This is available to purchase at: https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-bundle-11357050

This is a resource pack for the Reacting Masses calculations. I have made a range of resources for the calculations that AQA GCSE students will be expected to complete for the new Chemistry specification (8462). The resources packs contain 1. PowerPoint showing the key stages/background information on the calculation. 2. Word document with a printout showing the stages to complete the calculation. 3. Word document worksheet with some questions for the students to attempt, whenever possible these are based on exam questions. 4. WMV video clip this format is playable in most programs, such as RealPlayer, MPlayer, Windows Media Player, and the VLC Media Player. The video clip goes through the stages of the calculations on the worksheet, this is extremely useful for students (and teachers) who are struggling to see where the answer comes from. 5. Word document containing just the answers. There are a total of 8 resource packs for the Reacting Masses calculations. If you find the Resource Packs helpful and want more of the same the rest of the resource packs can be purchased from TES at: 1. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-1-free-sample-11356990 2. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-2-11357025 3. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-3-11357027 4. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-4-11357030 5. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-5-11357033 6. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-6-11357034 7. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-7-11357036 8. https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-8-11357041 I have also made a bundle which is available for a reduced price containing all of the resource pack for this type of calculation. This is available to purchase at: https://www.tes.com/teaching-resource/chemical-calculations-reacting-masses-bundle-11357050