This is a resource for the new GCSE AQA Specification, it meets specification points from the ‘Infection & Response’ unit. This resource contains two shorter lessons or one full lesson on bacterial & viral diseases. Bacterial disease: This lesson begins with pupils considering why death rates due to infectious diseases are now 30% lower than they were in the early 20th century. You will then introduce the three bacterial diseases the students will need to learn about - salmonella, gonorrhoea and bacterial diseases in plants - and ask students to discuss what they already know about these diseases. Pupils will then copy the table from the PowerPoint into their books and they can either read information in pairs or use the information placed around the room to complete the table. You could check the students have recorded all relevant information by self-assessing the work using red pens. For the mid-lesson plenary some statements about bacterial diseases will be read out and pupils can use thumbs up/thumbs down or RAG cards to show whether they think the statement is true or false. This will give you a chance to address any misconceptions. The next activity can be a silent task, pupils complete questions in their books and when finished they should peer-assess using their red pen. The plenary is an exit card (piece of paper) where pupils should write down a topic they feel secure with and an area which they do not feel as secure with. This can be addressed at the beginning of the next lesson. Viral diseases: The lessons starts with a recap on the viral diseases the students would have learnt about a beginning of the unit when covering communicable and non-communicable diseases (see my Health & Wellness lesson). Students can discuss and then a mind map can be brought together on the white board. Pupils then draw a table into their books and use the information around the room to complete the table. This is then followed by a mid-lesson progress check, pupils will answer questions in silence in their books which are then self-assessed using red pen. You can then conduct a game of key word bingo with your students. This works by pupils choosing 6 of the key words from the board and you can randomly read definitions of these key words, if pupils have they key word they should cross the word out. Once all 6 of their key words are crossed out they can call bingo! The plenary is a 3-2-1 recap of the lesson, pupils should write three facts they have learnt, two key words and a question to test their peers knowledge of viral diseases. If there is time at the end of the lesson All of the resources are found within the PowerPoint :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils are firstly given some information, in pairs, on how temperature can affect the rate of decay. They are asked to read through the information and complete a set of questions. Once this task is complete pupils can self-assess their work using the answers provided. The next task is for pupils to think > pair > share ideas about how you could stop or delay the decay process with food. Some images are provided on the PowerPoint slide as a prompt to help students, they can also use the information from the first task to help them come up with ideas. Once pupils have been given time to write their ideas down you can discuss as a group and then reveal the 5 main ways in which foods can be preserved. Pupils will then be given a set of information about each of these preservation methods, they need to use this information plus the information from the first task they completed to explain how each of the methods helps to prevent or delay the decay process. Pupils can then self or peer assess their work once complete. For the next task pupils are asked to use information posters places around the room or on their tables to answer a set of questions about decay & recycling. Once pupils have completed these questions they will need to assess their work using the answers provided. The very last task is an exam question that pupils can either complete in silence at the back of their books - higher ability - or perhaps use the work they have completed this lesson if they are lower ability. The plenary task is for students to write three sentences to summarise what they have learnt this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.1 Health & Lifestyle. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction into what happens to your food during the process of digestion, students are shown a diagram which demonstrates how large, insoluble food molecules are broken down into small, soluble ones. This follows into the definition and role of the human digestive system, students now need to discuss their ideas of the names of organs present in the digestive system. After a short class discussion, students will now complete a ‘Memory Test’ task. Students will need be shown a diagram of the human digestive system with organs labelled. They will have a few minutes to memorise the names of the organs of the digestive system, the labels will be taken away and then students need to try to remember as many of them as possible, by labelling their own digestive system worksheet. This task can be self-assessed once it is competed. Next, students will be given an information sheet in pairs. Students will need to read the information sheet and using this write a description of the roles of a set of organs present in the digestive system. Once complete, students can mark and correct their work using the answers provided in the PowerPoint. Lastly, students are shown a diagram of the villi which are present in the small intestine. Students will need to describe the adaptations of the villi which aid the role of absorption of small molecules into the bloodstream. The final activity requires students to find ten word, all related to the digestive system, in a word search. The plenary activity is a set of answers, students will need to write the questions which match up these answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA AS-level Biology course, particularly the ‘Biological Molecules’ module. For more lessons designed to meet specification points for the NEW AQA A-level Biology course please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience A-Level lesson format: I teach in more of a lecture style compared to GCSE. In the majority of my A-level lessons the beginning portion of the lesson is mainly teacher-led, where students are expected to take notes onto a handout/in their books. This is then mixed in with student-led activities, as well as questions and exam prep. You will find some of my slides have blank spaces for you to add more detail/descriptions/explanations. If you look at the ‘Notes’ section underneath each of these slides, you will find additional content which you can add in as you teach! This lesson begins with a review discussion of ATP as an energy source and its role in plant cells. The next few slides are lecture-style and designed to teach students the properties of water as a biological molecule. The notes underneath the slides also offer some answers to the discussion questions on the slides. Students are then given a four question ‘quick check’ to demonstrate their understanding so far. They should answer in their books and self-assess or check a partner’s work with the answers on the following slide. Then students will each be given a reason why water is important; the two reasons can be found as descriptions at the end of the slideshow. Students should teach a partner with the opposite reason, then make notes in table form in their books before moving to the next slide which is a quick explanation of inorganic ions. As a summary test, students are given two questions, the first of which includes a few sub-questions. Students should answer independently in their books then self-assess with the answers on the following slide. This is a good opportunity to answer any other questions! The plenary task is to explain what they have learned through three facts, three key words, and a question to test their peers on. All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This a resource aimed at the new AQA GCSE Biology specification as part of the 'infection & response' unit. This lesson is part of a 12 lesson bundle for the NEW 'Infection & Response' Unit, found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a recap of what makes a good medicine. Pupils are then given a scenario where they have to read some information cards on different medicines and using the information they need to decide which medicine would be the best to treat a bacterial infection. The next PowerPoint slide will go through the difference between antibiotics and painkillers and hopefully students should have chosen the antibiotic as the drug to treat bacterial infections in the previous activity. Next is an introduction to Alexander Fleming, the scientist who first discovered penicillin. Pupils can watch a video on his work and answer questions on a worksheet. Pupils can then peer-assess their work. The next few slides focus on how the growth of bacteria are affected by antibiotics, pupils can then use some data on the growth of bacteria to answer some questions. For the plenary pupils need to choose the correct word to complete the sentences. Other lessons for the NEW AQA 'Infection & Response' unit can be found in my TES shop. Thanks :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. The first part of this lesson will focus on a recap of some of the details learnt during the decay lesson, pupils are given a set of four multiple choice questions which they should answer in their books and then self-assess. The first task introduces recycling of materials in the ecosystem, pupils will need to read through a paragraph of information as a class. The slide will then be changed and pupils will need to try to recreate the paragraph as best as they can using the key words provided. Once completed the slide can be changed back to the initial paragraph for pupils to check and correct their work. The next part of the lesson is for pupils to look at the difference between a decomposers and detritivores, students will be given information in pairs and will need to teach each other about the organism card they have in their hands. Students will then try to write a description of each of the organisms in their books. The next part of the lesson focuses on the water cycle, firstly students will need to come up with as many processes as they can think of that contribute to the water cycle. Once this task has been assessed pupils will then be given a set of questions which they will need to answer whilst watching a video, once complete their answers can be assessed using the mark scheme provided. Using their answers from their previous tasks pupils will now need to match up the key words to the definition and the final task is for pupils to complete a diagram of the water cycle using the key words and definitions provided in the last task. The plenary task pupils will be given a set of 5 answers, it is up to the pupils to come up with 5 questions which may correspond to these 5 answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a video on inheritance, students should watch the video and whilst watching this they will answer a set of questions about chromosomes and where these structures are found within a cell. Once this task is complete, students can self-assess their work using the mark scheme provided. Next, students are introduced to the idea of a gene. Students will be given the definition of a gene and will then need to complete a ‘Memory Test’ task which helps students to identify the locations of genes, chromosomes, the nucleus and cell membrane. Students will get a few minutes to study this image, they will then need to recreate it in their books. This task can then be self-assessed using the mark scheme provided. Next, students are shown another image, they will need to use what they have learned so far this lesson to identify the different structures. They can discuss their ideas in pairs before the answers are revealed using the PowerPoint. Students will then need to complete a ‘Who Am I?’ task, - matching the names of structures to the correct description. The mark scheme for this task is included in the PowerPoint so students can self-assess their work once it is complete. Students will now be shown a diagram to depict how fertilisation takes place, a sperm and egg cell meeting, nuclei fuse and genetic material joins together to form an embryo where each body cell (except sex cells) contains 46 chromosomes. Students could sketch a diagram of this in their books. Lastly, students will watch a video on the discovery of DNA by Watson & Crick. Whilst watching the video they will need to answer a set of questions, once this task has been completed students should self-assess their answers using the mark scheme provided. The plenary task is an ‘Anagram Challenge’ - students would need to unscramble a set of words to reveal 6 key words from this lesson. There is an ‘Extra Challenge’ task for students to come up with a definition for each of these key words, the answers to the anagrams are included. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Organisation’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by identifying what metabolic rate is and then asking pupils to think about what important metabolic reactions take place within organisms. Pupils can discuss and try and come up with a brain storm in their books. Pupils then learn about the role of the liver by watching a video and answering questions at the same time, once pupils have finished completing this task they can assess their work using the answers provided on the PowerPoint slide. Next, pupils need to specifically learn about the role of the liver in clearing lactic acid from the body. They will be given an information card and will need to answer some questions using this information, once finished they can mark or peer assess their work. The final activity is an exam-style question about glycogen in the liver, pupils can answer this question in silence at the back of their books (for higher abilities this would be most suitable) or for lower abilities you may allow them to discuss and answer in pairs. Once completed they can mark their worn work. The plenary activity is a list of answers, pupils need to come up with the questions to which these words are the answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a video and a set of questions which pupils will need to answer about extinction and try and come up with a definition for this term. Once completed pupils can check their work against the answers provided on the PowerPoint. The next activity is for pupils to think > pair > share ideas about the sorts of changes that might occur within an organisms environment to bring about extinction. Pupils can discuss with their partner and create a mind map of their ideas in their books. Once pupils have completed this you can reveal some of the reasons for environmental change on the PowerPoint slide and pupils can check what they have got against the answers, adding in any they didn’t manage to get. The next activity is for pupils to read some cards of information about the causes of extinction, pupils can work in pairs or groups to read through these causes and summarise each one in their books. To put thees causes into context, the next activity is for pupils to look at examples of organisms which are at the brink of extinction and the reasons why. Pupils will be given a set of cards with information about a range of animal and plant organisms which are at different stages on the IUCN red list. Pupils will need to complete a table of information to describe the habitat and reasons why four of these organisms are endangered. The last part of the lesson will focus on mass extinctions, pupils will watch a video and answer questions about the causes and repercussion of mass extinction events. Once completed pupils can mark their work against the assessment criteria. The plenary activity is for pupils to pretend they are a conservationist campaigning to protect an organism of their choice, they need to write a twitter message to their followers to raise awareness of the factors which may be critically affecting the organism. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first part of the lesson asks students to think > pair > share some of their answers to questions about pollution - where does it come from? How may we monitor it? Once pupils have gathered together their ideas as groups, a class discussion can highlight some of the important ideas & the next slide details the answers. The next task focuses on sulfur dioxide pollution and it’s contribution to the formation of acid rain. Pupils will be given some information in pairs about this pollutant and will be required to answer questions about this information in their books. Once completed pupils are able to self-assess their work using the answers provided in the PowerPoint. The next part of the lesson is on catalytic converters, pupils will be given some information about a catalytic converter and a human bingo grid. Pupils will wander around the room and others will ask them questions in order to fill in their bing grid. Once a student has completed their grid they can shout bingo! When everyone has had enough time to complete the grid they will need to self-assess their work using the answers provided. The next task is for pupils to consider alternative fuels as a way of reducing air pollution. Pupils are given sets of information about three alternative fuels, they will then need to fill in a table of the advantages and disadvantages of these fuels. Once completed pupils can check their work against the answers provided, marking and correcting their answers. A mid-lesson progress check requires pupils to identify whether a set of statements are true or false, this can be completed with a mini whiteboard or in their books. The next part of the lesson focuses on how scientists can monitor pollution, pupils are given a set of results from particle collector pads which have been left in certain locations around the UK. Pupils need to record their results in a table, draw a graph to represent the results and write a conclusion about their results. The plenary task is for pupils to complete a fill-in-the-blanks task on air pollution, pupils can also self-assess their work using the answers provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Biology GCSE, particularly for the higher tier for the 'Infection & Response ’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a starter discussion to remind students about communicable disease, and which bacteria are harmful. The next slides introduce and define pathogens, and some harmful and non-harmful bacteria. They will then watch a short video which explains the differences between viruses and bacteria then complete a Venn diagram task. The next task is a true/false activity to complete as a class and asses their understanding thus far. Students are then directed to work in pairs to make a mind map in their books describing how pathogens are spread. Students will then be instructed to work on their own to answer three questions about pathogens spreading. Answers are on the following slide for self-assessment. The plenary task is an exam style question, students can self-assess to the mark scheme on the last slide. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA AS-level Biology course, particularly the ‘Cells’ module. For more lessons designed to meet specification points for the NEW AQA A-level Biology course please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience A-Level lesson format: I teach in more of a lecture style compared to GCSE. In the majority of my A-level lessons the beginning portion of the lesson is mainly teacher-led, where students are expected to take notes onto a handout/in their books. This is then mixed in with student-led activities, as well as questions and exam prep. You will find some of my slides have blank spaces for you to add more detail/descriptions/explanations. If you look at the ‘Notes’ section underneath each of these slides, you will find additional content which you can add in as you teach! This lesson on co-transport and absorption of glucose in the ileum begins with a starter discussion which asks students to compare and contrast transport and diffusion. They are also asked to discuss the importance of transport rather than diffusion in regard to reabsorption in the kidneys. The first task is a microscope activity for students to work in partner pairs and investigate adaptations of the epithelial cells of the ileum. Students will set up their light microscope to examine prepared slides and answer some questions. Answer samples are in the notes below the slides. The following slides define villi and microvilli for students to note in their books. There is a brief explanation of the relationship between increased surface area and space for carrier proteins. Students are then introduced to the role of diffusion in absorption and should take clear notes regarding facilitated diffusion. They should use the diagram on the slide to discuss why glucose concentration differs between epithelial and ileum cells. Relying on diffusion will only result in the concentrations either side of the intestinal epithelium becoming equal. Students should discuss why this is a problem, and how it might be overcome. The next slide is a complete diagram explaining co-transport of amino acids or glucose molecules. Students should take notes in their books because the next task is to complete a cartoon of this process and summarise the main steps. Students are then asked to ‘think > pair > share’ about the co-transport process and decide whether it is a direct or indirect form of active transport. They should use the details on the slide to inform their discussion. The final task is an exam-style question, with a mark scheme on the following slide for students to self-assess and consolidate their learning from this lesson. The plenary task is to either; summarise the lesson in three sentences, or complete definitions for five key-terms from the lesson. All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson for the new AQA GCSE Biology Specification, it particularly meets specification points from the 'Infection & Response' unit. This lesson is part of a 12 lesson bundle for the NEW 'Infection & Response' Unit, found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by pupils thinking about the type of risk-factors that increases someone's chances of developing cancer. The lesson then goes on to introduce the definition of cancer and identifies some of the parts of the body that cancer can most commonly affect. Pupils are then given, in pairs, the definition of malignant and benign tumours, they will need to teach their peer the definition of this word for their peer to write down - not just read it and copy it from the piece of paper! The slide will outline what happens if the cancer metastasises, there is a video demonstrating how cancer can spread from one part of the body to another. The next activity pupils are given a grid with symbols/diagrams on, pupils will need to identify the risk-factors of cancer that these diagrams represent. Some are a little more difficult than others, I have included the names of the more difficult ones on the board but you can it more/less challenging to suit the ability of your class. Once finished pupils can self-assess their work using red pens. For the plenary pupils will answer a past-paper question and then peer-assess their work.

This lesson is designed to meet specification points for the NEW AQA Trilogy GCSE Biology 'Organisation' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy Biology, Chemistry and Physics specifications please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will firstly be introduced to guard cells and stomata and how they are able t control the loss of water from the plant, diagrams of guard cells turgid and flaccid will help with this description. Pupils will then be given a set of questions which they will complete using a video, once completed pupils can then assess their work using the answers provided. The next slide shows the process of transpiration, pupils are shown a diagram and then descriptions of each stage in the transpiration process are shown stage by stage. You may need lower ability pupils to copy the stages up off the board in note form first. For higher ability pupils after you have gone through it a couple of times you can move the slide forward and pupils will need to write a description of the process of transpiration using the list of key words and diagram as a cue. After this has been completed pupils will then focus on the factors affecting the rate of transpiration, pupils will each be given a slip of information about a factor and how it affects the loss of water from the plant. Pupils will need to swap information with those around them to complete their table. If pupils do not quite finish this task they can assess their work using the completed table provided in the PowerPoint. The last activity is for pupils to complete exam questions on the topic of the lesson. Pupils will be given 6 minutes as it is worth 6 marks, they should try and complete the question in silence at the back of their books if possible. The plenary task is for pupils to write down 6 key words from the lesson. All resources are included in the PowerPoint slides, please let me know if you have any questions in the comments section and leave feedback if you download and use :) thanks!

This is a resource for the NEW AQA GCSE Biology specification, covering specification points within the ‘Infection and Response’ module. For more resources aimed at the NEW AQA GCSE specifications please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This resource contains the PowerPoint for the lesson, the resources are found at the end of the PowerPoint. The lesson begins with considering what is important in a new medicine and what scientists need to think about when developing new medicines. This goes on to define some of the key factors such as safety, efficacy & stability. Next, is an introduction of how a vaccination works, pupils will watch a video and answer questions on a worksheet. Pupils will self-asses their work. Pupils will then complete a cartoon strip of how a vaccination works, trying to use as many key words as possible. Pupils should self-assess their work against correct use of key terminology. The plenary will test the pupils knowledge of their ability to describe how a vaccine works. They will need to turn to the back of their books and describe how a vaccine works, using as many of the key terms as possible. Resources are all found at the end of the PowerPoint. Enjoy :)

This is a lesson which meets specification points in the NEW AQA GCSE (2016) 'Cells' SoW. Other lessons from this SoW and other AQA GCSE Trilogy Sow for the new specification can be found in my TES shop. This lesson begins by watching a video about the structure of cells and where to find the genetic information, pupils will watch the video and answer questions (provided in the PowerPoint presentation.) Pupils will then be presented with a labelled diagram of a cell, nucleus, chromosome and gene. Pupils will be required to analyse the diagram for a few minutes (you can include a stop clock on the board). The screen will then be changed and pupils will be given a blank copy of the diagram which they will need to complete from memory - pupils can then peer-assess their work. In the next activity, pupils are shown diagrams of a cell with a nucleus visible, DNA, a gene and a chromosome. Pupils can either create a flow chart by cutting and sticking the diagrams in order from largest to smallest and then labelling them. Alternatively, they could draw their own diagrams and label them. Pupils can then self-assess their work using red pens. The next activity, pupils are given a series of words and definitions, they will need to match the key words up to the correct definition. Pupils then self-assess their work. Their are two option for the plenary activity, for lower ability classes pupils will be required to fill in the blanks in a paragraph describing the structure and function of genetic information and where it is found within the cell. The second plenary is a past-paper question, pupils can answer this in their books and then peer-assess using red pens. All resources are included, please leave a review with feedback :). Thanks!

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by students considering in pairs/groups the names of different methods of contraception they have already heard of, they can create a mind map in their book which can then be checked against the list provided. Pupils will then watch a video which runs through some of the types of contraception out there and their pro’s and con’s, pupils will need to watch the video and note down as many advantages and disadvantages of these methods of contraception as they can. This task can be self-assessed using the answers provided. In the next activity pupils will be given a card sort in pairs or in groups, they will need to read through the information on methods of contraception and complete a table to summarise how these methods work or prevent pregnancy as well as their advantages and disadvantages. The next part of the lesson looks at the history of contraception, pupils will watch a video about Margaret Sanger - a progressive nurse in New York during the early 20th century. They will need to answer questions whilst watching the video, once finished their answers can be checked against the mark scheme provided. The final task is a ‘quick check -silent 5’ task, pupils will need to answer the summary questions about what they have learnt this lesson into their books. The plenary activity is for pupils to summarise what they have learnt this lesson in three sentences, using the list of key words that have been provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.1 Module on ‘Cells’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with an introduction to the definition of ‘specialised’, which follows on to define a ‘specialised cell’ as a cell that has special structures/features to help it carry out its job. Students are then shown some diagrams of specialised cells and are shown a video, whilst watching the video they are asked to note down as many specalised cells as they can. This work can then be checked and corrected using the answers provided on the PowerPoint. Students will now each be given a card of information about a the structural features and functions of certain specialised cells. Students will need to walk around the room, sharing information in order to complete a summary table. Finally, students are asked to complete an ‘Assessment Task’, which is a set of exam-style questions based upon what they have learned the last two lessons. Students can write their answers in their books, the mark scheme for these questions is included so students can assess their work. Lastly, students are asked to complete a ‘Job Advert’ for one of the specialised cells they have learned about this lesson, the advert should include a description of the job itself and the sort of traits required to perform the job. The plenary task requires students to copy and complete a set of sentences to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA AS-level Biology course, particularly the ‘Biological Molecules’ module. For more lessons designed to meet specification points for the NEW AQA A-level Biology course please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience A-Level lesson format: I teach in more of a lecture style compared to GCSE. In the majority of my A-level lessons the beginning portion of the lesson is mainly teacher-led, where students are expected to take notes onto a handout/in their books. This is then mixed in with student-led activities, as well as questions and exam prep. You will find some of my slides have blank spaces for you to add more detail/descriptions/explanations. If you look at the ‘Notes’ section underneath each of these slides, you will find additional content which you can add in as you teach! This lesson begins with a starter discussion to review the enzymes needed for DNA replication and the process of DNA replication itself. Students are then asked to make a list in their books of all of the biological processes that require energy. Students are then taught to think of ATP as an ‘energy currency’ and on the following slide asked to define the parts of the structure of ATP before reviewing ATP’s function. Students should use the ‘ATP handout’ to take notes. The next task asks students to answer a few questions on their mini whiteboards and discuss with a partner how ATP releases energy. Answers for self-assessment are on the next slide. The following slides explain the synthesis, roles, and properties of ATP. You will find further details for these slides in the ‘notes’ section under each slide. Students are then encouraged to ‘think > pair > share’ some ideas of why ATP’s properties might be useful to the role of ATP in cells. Answers for self-assessment are on the following slide. Students are then given an activity task to demonstrate knowledge of energy-requiring processes. Each student will be given a description of a process, these can be found at the end of the slideshow, there are five processes in total. Students should then work in small groups to teach each other the different processes and produce a table to represent what they’ve learned. After completing the lecture and tasks students are given four summary questions to answer in their books and self or partner-assess. Students should then make note of the summary slide before concluding the lesson. All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)