AQA Chemistry New Spec (Paper 2 Topic 2- exams 2018) – Organic Chemistry (4.7)AQA Chemistry New Specification! All lessons to cover the triple part of topic 7 (paper 2, topic 2) – Organic Chemistry, from the new spec (exams 2018). Lessons cover the Triple chemistry science route chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Chemistry Triple science specification points and lessons: 4.7.2.1 – Structure and formulae of alkenes (C7.4 lesson) 4.7.2.2 – Reactions of alkenes (C7.4 lesson) 4.7.2.3 – Alcohols (C7.5 lesson) 4.7.2.4 – Carboxylic acids (C7.6 lesson) 4.7.2.4 – Reaction of carboxylic acid and alcohols (esters) (C7.7 lesson) 4.7.3.1 – Addition polymerisation (C7.8 lesson) 4.7.3.2 – Condensation polymerisation (HT) (C7.9 lesson) 4.7.3.3 – Amino acids (HT) (C7.10 lesson)  4.7.3.4 - DNA and other naturally occurring polymers (HT) (C7.11 lesson)

AQA Physics New GCSE Spec (Paper 1 Topic 3 - exams 2018) – Particle model of matter (4.3) TRILOGY ONLY LESSONS All lessons to cover the trilogy course for topic 3 (paper 1, topic 3) – Particle model of matter , from the new spec (exams 2018). Lessons to cover the whole of the trilogy course for this topic. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. Lessons also have peer and self assessment slides with answers to tasks so students can mark their own or others' work. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: 4.3.1.2 - Changes of state (lesson P3.1) 4.3.1.1 - Density of materials and required practical (lesson P3.2) 4.3.2.1 - Internal Energy (lesson P3.3) 4.3.2.2 - Temperature changes in a system and specific heat capacity (lesson P4.3) 4.3.2.3 - Changes of heat and specific latent heat (lesson P3.4) 4.3.3.1 - Particle motion in gases (lesson P3.5)

AQA Physics New GCSE Spec (Paper 2 Topic 3 - exams 2018) – Magnetism and electromagnetism (4.7) All lessons to cover both TRILOGY and PHYSICS Only lessons of topic 7 (paper 2, topic 3) – Magnetism and electromagnetism (4.7), from the new spec (exams 2018). . The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy specification points and lessons: 4.7.1.1 - Poles of a magnet (P7.1 lesson) 4.7.1.2 - Magnetic fields (P7.1 lesson) 4.7.2.1 – Electromagnetism (P7.2 lesson) 4.7.2.2 - Fleming’s left-hand rule (HT only) (P7.3 lesson) 4.7.2.3 - Electric motors (HT only) (P7.3 lesson) 4.7.2.4 - Loudspeakers (Triple/HT Only) (P7.4 lesson) 4.7.3.1 - Induced potential (Triple/HT Only) (P7.4 lesson) 4.7.3.2 - Uses of the generator effect (Triple/HT Only) (P7.4 lesson) 4.7.3.3 - Microphones (Triple/HT Only) (P7.4 lesson) 4.7.3.4 - Transformers (Triple/HT Only) (P7.5 lesson)

A full set of power points that guides learners through every lesson in the Edexcel P3 unit. Plus, learner friendly specifications, broken down into the different topics so that learners can assess their own progress through the unit. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic. Power points are fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners. Many of the power points were used during ofsted observations which were given outstanding judgements.

A full set of power points that guides learners through every lesson in the Edexcel C1 unit. Plus, learner friendly specifications, broken down into the different topics so that learners can assess their own progress through the unit. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic. Power points are fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners. Many of the power points were used during ofsted observations which were given outstanding judgements. All passwords should have been deleted from resources to be edited, however if not, password is: science4

AQA Chemistry New GCSE Spec (Paper 2 Topic 1 - exams 2018) – The Rate and Extent of Chemical Change (4.6) All lessons to cover topic 6 (paper 2, topic 1) – The rate and extent of chemical change, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy and triple specification points and lessons: 4.6.1.1 - Calculating rates of reaction (C6.1 lesson) 4.6.1.2 - Factors which affect the rate of chemical reactions (C6.2 lesson) 4.6.1.3 - Collision theory and activation energy (C6.2 lesson) REQUIRED PRACTICAL 5 - C6.3 lesson 4.6.1.4 - Catalysts (C6.4 lesson) 4.6.2.1 - Reversible reactions (C6.5 lesson) 4.6.2.3 - Energy changes and reversible reactions (C6.5 lesson) 4.6.2.3 - Equilibrium (C6.6) 4.6.2.4 - The effect of changing conditions on equilibrium (HT only) (C6.6 lesson) 4.6.2.5 - The effect of changing concentration (HT only) (C6.6 lesson) 4.6.2.6 - The effect of temperature changes on equilibrium (HT only) (C6.6 lesson) 4.6.2.7 - The effect of pressure changes on equilibrium (HT only) (C6.6 lesson)

A full set of power points that guides learners through every lesson in the Edexcel C3 unit. Plus, learner friendly specifications, broken down into the different topics so that learners can assess their own progress through the unit. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic. Power points are fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners. Many of the power points were used during ofsted observations which were given outstanding judgements. All passwords should have been deleted from resources to be edited, however if not, password is: science4

Full resourced lesson power points to cover every specification point of the OCR 21st century science C7 - further chemistry unit. Lesson power points have differentiated tasks to challenge most able and support less able learners. Regular progress checks to assess understanding through lessons also included on power points.

AQA Physics New GCSE Spec (Paper 2 Topic 2 - exams 2018) – Waves (4.6) All lessons to cover the TRILOGY lessons of topic 6 (paper 2, topic 2) – Waves (4.6), from the new spec (exams 2018). . The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy specification points and lessons: 4.6.1.1 - Transverse and longitudinal waves (P6.1 lesson) 4.6.1.2 - Properties of waves (wave calculations) (P6.1 lesson) 4.6.1.2 - Properties of waves - required practical - make observations to identify the suitability of apparatus to measure the frequency, wavelength and speed of waves in a ripple tank and waves in a solid and take appropriate measurements. (P6.2 lesson) 4.6.2.1 - Types of electromagnetic waves (P6.6 lesson) 4.6.2.2 - Properties of electromagnetic waves 1 (P6.7a lesson) 4.6.2.3 - Properties of electromagnetic waves 2(P6.7a lesson) Required practical (P6.7b lesson) - investigate how the amount of infrared radiation absorbed or radiated by a surface depends on the nature of that surface. 4.6.2.4 - Uses and applications of electromagnetic waves (P6.8 lesson) To buy all of these lessons separately from my shop would cost £18.

AQA Physics New GCSE Spec (Paper 1 Topic 2 - exams 2018) – Electricity (4.2) TRILOGY ONLY LESSONS All lessons to cover the trilogy course for topic 2 (paper 1, topic 2) – Electricity, from the new spec (exams 2018). Lessons to cover the whole of the trilogy course for this topic. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: 4.2.1.1 - Standard circuit symbols (lesson P2.1) 4.2.1.2 - Electric charge and current (lesson P2.1) 4.2.1.3 - Current, resistance and potential difference (lesson P2.2) Required Practical 3 (lesson P2.2) 4.2.1.4 - Resistors (lesson P2.3) Required practical 4 (lesson P2.3) 4.2.2 - Series and parallel circuits (lesson P2.4 and P2.5) 4.2.3.1 - Direct and alternating potential difference (lesson P2.6) 4.2.3.2 - Mains electricity (lesson P2.7) 4.2.4.1 - Power (lesson P2.8) 4.2.4.2 - Energy transfers in everyday appliances (lesson P2.8) 4.2.4.3 - The National Grid (lesson P2.9)

AQA Chemistry New GCSE Spec (Paper 2 Topic 5 - exams 2018) – The Earth's resources (4.10) ALL LESSONS to cover both combined (trilogy) and Separate (Chemistry only) routes All lessons to cover topic 10 (paper 2, topic 5) – The Earth's resources, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy and separate specification points: 4.10.1.1 - Using the Earth's resources and sustainable development (C10.1 lesson) 4.10.1.2 - Potable water (C10.2 lesson) Required practical 8 (C10.2 lesson) 4.10.1.3 - Waste water treatment (C10.3 lesson) 4.10.1.4 - Alternative methods of extracting metals (HT ONLY) (C10.4 lesson) 4.10.2.1 - Life cycle assessment (C10.5 lesson) 4.10.2.2 - Ways of reducing the use of resources (C10.6 lesson) TRIPLE Chemistry only specification points: 4.10.3.1 - Corrosion and its prevention (C10.7 lesson) 4.10.3.2 - Alloys as useful materials (C10.8 lesson) 4.10.3.3 - Ceramics, polymers and composites (C10.9 lesson) 4.10.4.1 - The Haber process (C10.10 lesson) 4.10.4.2 - Production and uses of NPK fertilisers (C10.11 lesson)

AQA Chemistry New Specification! Chemical analysis (Paper 2, topic 3) (4.8) All lessons to cover paper 2, topic 3 (4.8) from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include the required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow to give extended feedback on their work in these tasks. Specification points covered (lesson by lesson): 4.8.1.1 (TRILOGY) - Pure substances 4.8.1.3 (TRILOGY) - Chromatography 4.8.2 (TRILOGY) - Identification of gases (oxygen, carbon dioxide, hydrogen, chlorine) 4.8.3.1 + 4.8.3.6 + 4.8.3.7 (TRIPLE) - Flame tests, instrumental analysis and flame emission spectroscopy 4.8.3.2 (TRIPLE) - Identifying cations using sodium hydroxide 4.8.3.3-5 (TRIPLE) - Identifying anions Required practical 6 + 7 covered in lessons.

AQA Biology New GCSE Spec (Paper 2 Topic 3 - exams 2018) – Ecology (4.7) All lessons to cover the TRILOGY lessons of topic 7 (paper 2, topic 3) – Ecology (4.7), from the new spec (exams 2018). . The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy specification points and lessons: 4.7.1.1 - Communities (B7.1 lesson) 4.7.1.2 - Abiotic factors(B7.1 lesson) 4.7.1.3 - Biotic factors (B7.1 lesson) 4.7.1.4 – Adaptations (B7.2 lesson) 4.7.2.1 - Levels of organisation (feeding relationships + predator - prey cycles) (B7.3 lesson) 4.7.2.1- Levels of organisation (required practical 9 - population sizes) (B7.4 lesson) 4.7.2.2 - How materials are cycled (B7.5 lesson) 4.7.3.1 - Biodiversity (B7.7 lesson) 4.7.3.6 - Maintaining Biodiversity (B7.7 lesson) 4.7.3.2 - Waste management (B7.9 lesson) 4.7.3.3 - Land use (B7.9 lesson) 4.7.3.4 - Deforestation (B7.9 lesson) 4.7.3.5 - Global warming (B7.9 lesson) To buy all of these lessons separately from my shop would cost £21.

AQA Chemistry New Specification! All lessons to cover topic 1 (paper 1) from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. Specification points covered: 4.1.1.1 - atoms, elements and compounds 4.1.1.2 - Mixtures 4.1.1.3 - Scientific models of the atom 4.1.1.4 - relative electrical charges of subatomic particles 4.1.1.5 - size and mass of atoms 4.1.1.6 - electronic structure 4.1.2.1 - The periodic table 4.1.2.2 - development of the periodic table 4.1.2.3 - metals and non-metals 4.1.2.4 - Group 0 4.1.2.5 - Group 1 4.1.2.6 - Group 7 Chemistry Triple science lessons: 4.1.3.1 + 2 - Transition metals and their properties Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.

AQA Chemistry New Specification! All lessons to cover topic 3 (paper 1) – Quantitative Chemistry, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy and triple specification points and lessons: 4.3.1.1 – Conservation of mass and balanced chemical equations (C3.1 lesson) 4.3.1.2 – Relative formula mass (C3.2 lesson) 4.3.1.3 – Mass changes when a reactant or product is a gas (C3.1 lesson) 4.3.2.1 – Moles (Higher tier) (C3.3 lesson) 4.3.2.2 – Amount of substances in equations (Higher tier) (C3.4 lesson) 4.3.2.3 – Using moles to balance equations (Higher tier) (C3.5 lesson) 4.3.2.4 – Limiting reactants (HT) (C3.5 lesson) 4.3.2.5 – Concentration of solutions (C3.6 lesson) Chemistry Triple science specification points and lessons: 4.3.4 – Using concentrations of solutions in mol/dm3 (HT) (C3.7 lesson) 4.3.3.1 – Percentage yield (C3.8 lesson) 4.3.3.2 – Atom economy (C3.9 lesson) 4.3.5 – Molar volume of gases (HT) (C3.10 lesson)

AQA Chemistry New Spec (Paper 2 Topic 2- exams 2018) – Organic Chemistry (4.7)AQA Chemistry New Specification! All lessons to cover topic 7 (paper 2, topic 2) – Organic Chemistry, from the new spec (exams 2018). Lessons cover all specification points of this topic (see below). The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy specification points and lessons: 4.7.1.1 – Crude oil, hydrocarbons and alkanes (C7.1 lesson) 4.7.1.2 – Fractional distillation and petrochemicals (C7.2 lesson) 4.7.1.3 –Properties of hydrocarbons (C7.2 lesson) 4.7.1.4 – Cracking and alkenes (C7.3 lesson) Chemistry Triple science specification points and lessons: 4.7.2.1 – Structure and formulae of alkenes (C7.4 lesson) 4.7.2.2 – Reactions of alkenes (C7.4 lesson) 4.7.2.3 – Alcohols (C7.5 lesson) 4.7.2.4 – Carboxylic acids (C7.6 lesson) 4.7.2.4 – Reaction of carboxylic acid and alcohols (esters) (C7.7 lesson) 4.7.3.1 – Addition polymerisation (C7.8 lesson) 4.7.3.2 – Condensation polymerisation (HT) (C7.9 lesson) 4.7.3.3 – Amino acids (HT) (C7.10 lesson)  4.7.3.4 - DNA and other naturally occurring polymers (HT) (C7.11 lesson)

AQA Biology New GCSE Spec (Paper 2 Topic 1 - exams 2018) – Homeostasis and response (4.5) All lessons to cover the TRILOGY lessons of topic 5 (paper 2, topic 1) – Homeostasis and response, from the new spec (exams 2018). . The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy specification points and lessons: 4.5.1 - Homeostasis (B5.1 lesson) 4.5.3.2 - Control of blood glucose concentration (B5.1 lesson) 4.5.2.1 - Structure and function (B5.2 lesson) Required practical 7 - plan and carry out an investigation into the effect of a factor on human reaction time (B5.2 lesson) 4.5.3.1 - Human endocrine system (B5.6 lesson) 4.5.3.4 - Hormones in human reproduction (B5.10 lesson) 4.5.3.5 - Contraception (B5.11 lesson) 4.5.3.6 - The use of hormones to treat infertility (HT only) (B5.12 lesson) 4.5.3.7 - Negative feedback (HT only) (B5.13 lesson)

AQA Chemistry New Specification! Paper 1, Topic 2, ALL LESSONS! All lessons to cover topic 2 (paper 1) – bonding, structure and the properties of matter, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. Complete set of resources, including full lesson power points and supporting differentiated worksheets (where needed) to teach this entire unit. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic: 4.2.1.1 – Chemical bonds 4.2.1.2 – Ionic bonding 4.2.1.3 – Ionic compounds 4.2.1.4 – Covalent bonding 4.2.1.5 – Metallic bonding 4.2.2.1 – Three states of matter 4.2.2.2 – State symbols 4.2.2.3 – Properties of ionic compounds 4.2.2.4 – Simple covalent substances 4.2.2.5 – Polymers 4.2.2.6 – Giant covalent substances 4.2.2.7 – Properties of metals and alloys 4.2.2.8 – Metals as conductors 4.2.3.1 – Diamond 4.2.3.2 – Graphite 4.2.3.3 – Graphene and fullerenes Chemistry Triple science lessons: 4.2.4.1 – Sizes of particles and their properties 4.2.4.2 – Uses of nanoparticles

AQA Chemistry New GCSE Specification! AQA Chemistry New GCSE Spec (Paper 1 Topic 4- exams 2018) – Chemical Changes (4.4) AQA Chemistry New GCSE Specification! All lessons to cover topic 4 (paper 1, topic 4) – Chemical Changes, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy and triple specification points and lessons: 4.4.1.1 - Metal Oxides (C4.1 lesson) 4.4.1.2 - The reactivity series (C4.1 lesson) 4.4.1.3 - Extraction of metals and reduction (C4.2 lesson) 4.4.1.4 - Oxidation and reduction in terms of electrons (HT only) (C4.3 lesson) 4.4.2.1 - Reactions of acids with metals (C4.4 lesson) 4.4.2.2 - Neutralisation of acids and salt production (C4.5 lesson) 4.4.2.3 - Soluble salts (C4.5 lesson) 4.4.2.4 - The pH scale and neutralisation (C4.6) 4.4.2.5 - Titrations (Triple only) (C4.7 lesson) (Includes required Practical activity 2) 4.4.2.6 - Strong and weak acids (HT only) (C4.8 lesson) 4.4.3.1 - The process of electrolysis (C4.9 lesson) 4.4.3.2 - Electrolysis of molten ionic compounds (C4.9 lesson) 4.3.3.3 - Using electrolysis to extract metals (C4.10 lesson) 4.4.3.4 - Electrolysis of aqueous solutions (C4.9 lesson) 4.4.3.5 - Representation of reactions as half equations (HT only)(C4.9 lesson) 4.4.3.4 - Required practical 3 (C4.11 lesson)

AQA Physics New GCSE Spec (Paper 1 Topic 2 - exams 2018) – Electricity (4.2) ALL LESSONS - combined and triple All lessons to cover the SEPARATE Physics course for topic 2 (paper 1, topic 2) – Electricity. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: 4.2.1.1 - Standard circuit symbols (lesson P2.1) 4.2.1.2 - Electric charge and current (lesson P2.1) 4.2.1.3 - Current, resistance and potential difference (lesson P2.2) Required Practical 3 (lesson P2.2) 4.2.1.4 - Resistors (lesson P2.3) Required practical 4 (lesson P2.3) 4.2.2 - Series and parallel circuits (lesson P2.4 and P2.5) 4.2.3.1 - Direct and alternating potential difference (lesson P2.6) 4.2.3.2 - Mains electricity (lesson P2.7) 4.2.4.1 - Power (lesson P2.8) 4.2.4.2 - Energy transfers in everyday appliances (lesson P2.8) 4.2.4.3 - The National Grid (lesson P2.9) 4.2.5.1 - Static charge (P2.10 lesson - TRIPLE only) 4.2.5.2 - Electric fields (P2.10 lesson - TRIPLE only) To buy all lessons separately would cost £30