Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
AQA Physics New GCSE Spec (Paper 2 Topic 2 - exams 2018) – Waves (4.6)
All lessons to cover the TRILOGY lessons of topic 6 (paper 2, topic 2) – Waves (4.6), from the new spec (exams 2018). .
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy specification points and lessons:
4.6.1.1 - Transverse and longitudinal waves (P6.1 lesson)
4.6.1.2 - Properties of waves (wave calculations) (P6.1 lesson)
4.6.1.2 - Properties of waves - required practical - make observations to identify the suitability of apparatus to measure the frequency, wavelength and speed of waves in a ripple tank and waves in a solid and take appropriate measurements. (P6.2 lesson)
4.6.2.1 - Types of electromagnetic waves (P6.6 lesson)
4.6.2.2 - Properties of electromagnetic waves 1 (P6.7a lesson)
4.6.2.3 - Properties of electromagnetic waves 2(P6.7a lesson)
Required practical (P6.7b lesson) - investigate how the amount of infrared radiation absorbed or radiated by a surface depends on the nature of that surface.
4.6.2.4 - Uses and applications of electromagnetic waves (P6.8 lesson)
To buy all of these lessons separately from my shop would cost £18.
AQA Chemistry New Spec (Paper 2 Topic 2- exams 2018) – Organic Chemistry (4.7) AQA Chemistry New Specification!
All lessons to cover the trilogy part of topic 7 (paper 2, topic 2) – Organic Chemistry, from the new spec (exams 2018).
Lessons cover the combined 'trilogy' science route chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy specification points and lessons:
4.7.1.1 – Crude oil, hydrocarbons and alkanes (C7.1 lesson)
4.7.1.2 – Fractional distillation and petrochemicals (C7.2 lesson)
4.7.1.3 –Properties of hydrocarbons (C7.2 lesson)
4.7.1.4 – Cracking and alkenes (C7.3 lesson)
AQA C5 (New Spec – Unit 4.5 – Energy Changes)
Lesson: C5.1 - Energy transfer during exothermic and endothermic reactions
Specification points covered = 4.5.1.1 – Energy transfer during exothermic and endothermic reactions
Includes required practical activity 4!
A fully resourced lesson about exothermic and endothermic reactions to be used when teaching the New specification of AQA C5 (Paper 1, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.1 – Using the Earth's resources and sustainable development
Specification points covered =
4.10.1.1 - Using the Earth's resources and sustainable development
A fully resourced lesson about using the Earth's resources and sustainable development to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
This is a revision power point to be used when revising the content of AQA Biology paper 2 - it covers the key areas of the trilogy/combined course. The activities/questions/information slides covering the areas of paper 2 that tend to be most difficult for students and could be used over a number of revision lessons to prepare your students for their exams.
The power point includes:
An overview of all topics on paper 2 biology
Recap of the required practical activities
Slides to recap the importance of data and how to ensure data is reliable, reproducible and repeatable
Information slides to quickly recap areas of paper 2
Differentiated activities that ask students to apply their knowledge of the different topics. More difficult questions are there to ask students to apply their knowledge to unfamiliar situations. Stretch activities for the more able.
One mark questions to quickly recap topics and establish what topics need to be revisited more thoroughly than others.
The topic areas that are covered on this revision power point are :
The nervous system
Hormones
negative feedback
Menstrual cycle
treating infertility
contraception
meiosis
DNA
Inheritance
Genetic cross
Variation
The human genome project
Classification
selective breeding
genetic modification
Ecology
AQA C6 (New GCSE Spec – Unit 4.6 – The rate and extent of chemical changes)
Lesson: C6.2 – Collision theory and factors affecting rate of reaction
Specification points covered =
4.6.1.2 - Factors which affect the rate of chemical reactions
4.6.1.3 - Collision theory and activation energy
A fully resourced lesson about collision theory and factors affecting the rate of reaction to be used when teaching the New specification of AQA C6 (Paper 2, Topic 1).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C6 (New GCSE Spec – Unit 4.6 – The rate and extent of chemical changes)
Lesson: C6.5 – Reversible reactions and energy changes in reversible reactions
Specification points covered =
4.6.2.1 - Reversible reactions
4.6.2.3 - Energy changes and reversible reactions
A fully resourced lesson about reversible reactions and energy changes within reversible reactions to be used when teaching the New specification of AQA C6 (Paper 2, Topic 1).
Fully resourced with differentiated tasks and activities shown on power point slides.
This is a revision power point to be used when revising the content of AQA Chemistry paper 2 - it covers the key areas of the trilogy/combined course. The activities/questions/information slides covering the areas of paper 2 that tend to be most difficult for students and could be used over a number of revision lessons to prepare your students for their exams.
The power point includes:
An overview of all topics on paper 2 Chemistry
Recap of the required practical activities
Information slides to quickly recap areas of paper 2
Differentiated activities that ask students to apply their knowledge of the different topics. More difficult questions are there to ask students to apply their knowledge to unfamiliar situations. Stretch activities for the more able.
One mark questions to quickly recap topics and establish what topics need to be revisited more thoroughly than others.
The main topic areas that are covered on this revision power point are :
Rates of reaction - with required practical on this
Collision theory
Catalysts
Equilibrium
Separation
Chromatography - with required practical
Crude oil
Fractional distillation
alkanes
cracking
the atmosphere
pollution
the greenhouse effect
human impact
potable water
purifying water
life cycle assessments
Amongst many other areas covered
AQA Chemistry New Specification!
All lessons to cover topic 9 - chemistry of our atmosphere (paper 2) from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.
Specification points covered:
4.9.1.1 - The proportions of different gases in the atmosphere
4.9.1.2 - The Earth's early atmosphere
4.9.1.3 - How oxygen increased
4.9.1.4 - How carbon dioxide decreased
4.9.2.1 - Greenhouse gases
4.9.2.2 - Human activities and greenhouse gases
4.9.2.3 - Global climate change
4.9.2.4 - The carbon footprint and its reduction
4.9.3.1 - Atmospheric pollutants from fuels
4.9.3.2 - Properties and effects of atmospheric pollutants
AQA Chemistry New GCSE Spec (Paper 2 Topic 5 - exams 2018) – The Earth's resources (4.10 - TRIPLE ONLY LESSONS)
All lessons to cover the TRIPLE ONLY lessons of topic 10 (paper 2, topic 5) – The Earth's resources (exams 2018).
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
4.10.3.1 - Corrosion and its prevention (C10.7 lesson)
4.10.3.2 - Alloys as useful materials (C10.8 lesson)
4.10.3.3 - Ceramics, polymers and composites (C10.9 lesson)
4.10.4.1 - The Haber process (C10.10 lesson)
4.10.4.2 - Production and uses of NPK fertilisers (C10.11 lesson)
AQA C5 (New Spec – Unit 4.5 – Energy Changes)
Lesson: C5.2 - Reaction profiles and bond energy calculations
Specification points covered = 4.5.1.2 – Reaction profiles
4.5.1.3 – The energy change of reactions (HT Only)
A fully resourced lesson about reaction profiles and calculating bond energies to be used when teaching the New specification of AQA C5 (Paper 1, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA P4 (New GCSE Spec – Unit 4.4 – Atomic Structure)
Lesson: P2.6 – Radioactive Contamination
Specification points covered =
4.4.2.4 - Radioactive Contamination
A fully resourced lesson about radioactive contamination to be used when teaching the new physics specification GCSE of AQA P4 (Paper 1, Topic 4 - Atomic structure).
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
AQA C8.1 (new spec - 4.8.1) - Pure substances.
A fully resourced lesson about Pure substances to be used when teaching the New specification of AQA C8 (Chemical analysis).
Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson
AQA C3 (New Spec – Unit 4.3 – Quantitative chemistry)
Lesson: C3.1 - Mass conservation and balancing equations
Specification points covered = 4.3.1.1 conservation of mass and balanced chemical equations
4.3.1.3 mass changes when a reactant or product is a gas
A fully resourced lesson about Mass conservation and balancing equations to be used when teaching the New specification of AQA C3 (Paper 1, Topic 3).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New Specification!
All lessons to cover topic 3 (paper 1) – Quantitative Chemistry, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy and triple specification points and lessons:
4.3.1.1 – Conservation of mass and balanced chemical equations (C3.1 lesson)
4.3.1.2 – Relative formula mass (C3.2 lesson)
4.3.1.3 – Mass changes when a reactant or product is a gas (C3.1 lesson)
4.3.2.1 – Moles (Higher tier) (C3.3 lesson)
4.3.2.2 – Amount of substances in equations (Higher tier) (C3.4 lesson)
4.3.2.3 – Using moles to balance equations (Higher tier) (C3.5 lesson)
4.3.2.4 – Limiting reactants (HT) (C3.5 lesson)
4.3.2.5 – Concentration of solutions (C3.6 lesson)
Chemistry Triple science specification points and lessons:
4.3.4 – Using concentrations of solutions in mol/dm3 (HT) (C3.7 lesson)
4.3.3.1 – Percentage yield (C3.8 lesson)
4.3.3.2 – Atom economy (C3.9 lesson)
4.3.5 – Molar volume of gases (HT) (C3.10 lesson)
AQA Chemistry New GCSE Spec (Paper 2 Topic 1 - exams 2018) – The Rate and Extent of Chemical Change (4.6)
All lessons to cover topic 6 (paper 2, topic 1) – The rate and extent of chemical change, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy and triple specification points and lessons:
4.6.1.1 - Calculating rates of reaction (C6.1 lesson)
4.6.1.2 - Factors which affect the rate of chemical reactions (C6.2 lesson)
4.6.1.3 - Collision theory and activation energy (C6.2 lesson)
REQUIRED PRACTICAL 5 - C6.3 lesson
4.6.1.4 - Catalysts (C6.4 lesson)
4.6.2.1 - Reversible reactions (C6.5 lesson)
4.6.2.3 - Energy changes and reversible reactions (C6.5 lesson)
4.6.2.3 - Equilibrium (C6.6)
4.6.2.4 - The effect of changing conditions on equilibrium (HT only) (C6.6 lesson)
4.6.2.5 - The effect of changing concentration (HT only) (C6.6 lesson)
4.6.2.6 - The effect of temperature changes on equilibrium (HT only) (C6.6 lesson)
4.6.2.7 - The effect of pressure changes on equilibrium (HT only) (C6.6 lesson)
AQA Chemistry New GCSE Specification!
AQA Chemistry New GCSE Spec (Paper 1 Topic 4- exams 2018) – Chemical Changes (4.4)
AQA Chemistry New GCSE Specification!
All lessons to cover topic 4 (paper 1, topic 4) – Chemical Changes, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy and triple specification points and lessons:
4.4.1.1 - Metal Oxides (C4.1 lesson)
4.4.1.2 - The reactivity series (C4.1 lesson)
4.4.1.3 - Extraction of metals and reduction (C4.2 lesson)
4.4.1.4 - Oxidation and reduction in terms of electrons (HT only) (C4.3 lesson)
4.4.2.1 - Reactions of acids with metals (C4.4 lesson)
4.4.2.2 - Neutralisation of acids and salt production (C4.5 lesson)
4.4.2.3 - Soluble salts (C4.5 lesson)
4.4.2.4 - The pH scale and neutralisation (C4.6)
4.4.2.5 - Titrations (Triple only) (C4.7 lesson) (Includes required Practical activity 2)
4.4.2.6 - Strong and weak acids (HT only) (C4.8 lesson)
4.4.3.1 - The process of electrolysis (C4.9 lesson)
4.4.3.2 - Electrolysis of molten ionic compounds (C4.9 lesson)
4.3.3.3 - Using electrolysis to extract metals (C4.10 lesson)
4.4.3.4 - Electrolysis of aqueous solutions (C4.9 lesson)
4.4.3.5 - Representation of reactions as half equations (HT only)(C4.9 lesson)
4.4.3.4 - Required practical 3 (C4.11 lesson)
AQA C3 (New Spec – Unit 4.3 – Quantitative chemistry)
Lesson: C3.6 - Concentration of solutions
Specification points covered = 4.3.2.5 concentration of solutions
A fully resourced lesson about concentration of solutions to be used when teaching the New specification of AQA C3 (Paper 1, Topic 3).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C5 (New Spec – Unit 4.5 – Energy Changes)
Lesson: C5.4 - Fuel Cells (Triple only)
Specification points covered = 4.5.2.2 – Fuel Cells (Triple only)
A fully resourced lesson about fuel cells to be used when teaching the New specification of AQA C5 (Paper 1, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
