Edexcel 9-1 TOPIC 5 Sc15 Dynamic Equilibria: Industrial processes including large scale of the Haber process Edexcel 9-1 Sc15b PART 2 ONLY (Haber process sold separately) TOPIC 5 Dynamic Equilibria: Haber process + Industrial processes SEPARATE TRIPLE PAPER 1 SEPARATE or TRIPLE PAPER 1 TOPIC 5 SEPARATE SCIENCE PAPER 1 - NEW for SEPTEMBER 2017 Learning objectives: Objectives: To recall the conditions for the Haber process To explain how the conditions are chosen for industrial chemical reactions (H) To explain the reaction pathways chosen from industrial processes (H) All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying No exam questions due to copy write Main topics include: (H) - Haber process conditions -Changes in concentration, pressure, temperature and catalysts - Rate of reaction and time taken to reach equilibrium - exam question but not included - Industrial processes - analysis of graphs - interpretation of graphs (graph activity requires printing on slide 11) Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

CAN BE USED FOR ABOUT 8 LESSONS OVER 187 SLIDES ACTIVATE - SHOWING THE FORMULA AND HOW IT WORKS DEMONSTRATE - ALLOWING STUDENTS TO COMPLETE THE QUESTIONS AFL - CHECKING ANSWERS (ALL ANSWERS PRESENT) Edexcel CC9 PART 1-3 Calculations involving masses for the new 9-1 GCSE 6-8 lessons depending on how good student are at the calculations Mainly covering TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017 TOPIC 5 SEPARATE SCIENCE PAPER 1: QUANTITATIVE ANALYSIS Touching on TOPIC 7 Bond energy calculations for the higher tier students Powerpoint with over 187 slides including worked examples, questions for the students to complete and then the answers of the questions. Some calculations include more than one method, to help stretch the brightest and support the lowest ability students. There is a summary slide for each paper (Paper 1 and Paper 2- separate science/ triple science) and a calculations summary slide to show all the equations that students will need to know over the 2 separate science papers. QUESTIONS ATTACHED TO ALLOW STUDENTS TO WORK INDEPENDENTLY OR AT THEIR OWN PACE (THEY ARE THE SAME QUESTIONS AS IN THE POWERPOINT - SO ALL ANSWERS ARE IN THE POWERPOINT) Can set as homework or use in a revision lesson. Calculations include: COMBINED SCIENCE… Rf Value Isotope Calculation (H) Relative Formula Mass Empirical from molecular Molecular Formula from Empirical Formula and Mr Empirical Formula from Reacting masses and % composition Conservation of Mass Reacting masses (without moles) Concentration (g/dm3) Moles (H) Using Avogadro’s constant to calculate the number of atoms or molecules (H) Reacting masses (with moles) (H) Finding the Limiting Reagent (H) Using the limiting reagent to calculate the mass (H) Balancing equations (with moles) (H) Bond Enthalpy (H) SEPARATE SCIENCE … Percentage yield Reacting Masses and percentage yield Atom Economy Concentration (moldm-3) Concentration – converting between moldm-3 and gdm-3 Titration equations Molar volume of gases – with volume and masses Please leave feedback

A 6 mark question lesson FOR INDEPENDENT STUDY that explains how to answer 6 mark questions for students. Ideal answers given SHEETS FOR PRINTING

TOPIC 7 Rates of reaction PAPER 2- NEW for SEPTEMBER 2017 CC14 Rates of reaction Edexcel 9-1 CC14 Revision MAT / SHEET for Rates of Reaction TOPIC 7 Rate of reaction and energy changes PAPER 12 - NEW for SEPTEMBER 2017 PLEASE NOTE - THESE MATS ARE MEANT TO BE PHOTOCOPIED AND LAMINATED FOR STUDENTS TO WORK ON PAPER (DUE TO LIMITED PHOTOCOPYING WITHIN THE DEPARTMENT CURRENTLY); THEY CAN BE ADAPTED SO STUDENTS CAN WRITE ON THEM BUT THAT IS ENTIRELY YOUR CHOICE 8 mats in total REVISION MATs - PART 1 to 8 ALL ANSWERS PROVIDED Part 1: Rates of reactions Part 2: Collision Theory Part 3: Concentration Parts 4: Surface Area CORE PRACTICAL Part 5: Temperature CORE PRACTICAL Part 6: Catalysts Part 7: Graphs Part 8: Ideal answers for exam questions - nothing to fill in just crib sheets USED FOR REVISION OF Rates of Reactions Main topics include: Rates of reaction Activation Energy Collision Theory Concentration Temperature Core practicals Surface Area Catalysts Graphs All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!! PLEASE LEAVE FEEDBACK and REVIEWS

TOPIC 7 Rates of reaction and Energy changes PAPER 2- NEW for SEPTEMBER 2017 CC15 Energy Changes Edexcel 9-1 CC15 Revision MAT / SHEET for Energy Changes TOPIC 7 Rate of reaction and energy changes PAPER 2 - NEW for SEPTEMBER 2017 PLEASE NOTE - THESE MATS ARE MEANT TO BE PHOTOCOPIED AND LAMINATED FOR STUDENTS TO WORK ON PAPER (DUE TO LIMITED PHOTOCOPYING WITHIN THE DEPARTMENT CURRENTLY); THEY CAN BE ADAPTED SO STUDENTS CAN WRITE ON THEM BUT THAT IS ENTIRELY YOUR CHOICE 3 mats in total REVISION MATs - PART 1 to 3 ALL ANSWERS PROVIDED Part 1:Energy Changes - Endothermic and Exothermic Part 2: Energy Changes - MEXican BEN Part 3: Energy Changes - Bond Energy USED FOR REVISION OF Rates of Reactions Main topics include: Activation Energy Endothermic Exothermic MEXican BEN Bond Breaking Bond Making Bond energy Enthalpy All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!! PLEASE LEAVE FEEDBACK and REVIEWS

KS3 Unit 7B Biology - Reproduction, Reproductive organs, Pregnancy, Gestation, Birth, Puberty, Menstrual cycle Aimed for high and low ability Year 7 but can be adapted and slides can be hidden - all information is below each slide. Each lesson contains slides for higher and lower groups 7 lessons in total and worksheets and homework provided All answers are within the powerpoint Prompts are in place under each slide All things are explained in great detail Animations Lesson 7Ba: Animal sexual reproduction Lesson 1: Sexual Reproduction Objectives: To understand the terms sexual reproduction To understand what happens during fertilisation To describe how fish, birds and mammals reproduce sexually Lesson 2: Care for animals Describe how different animals care for their offspring. Explain the implications of a certain level of animal offspring aftercare in different situations. Explain the links between scientific advances and survival rates of humans Lesson 7Bb: Reproductive Lesson 3: Reproductive organs Objectives: To be able to identify and explain how sperm and egg cells are adapted to their functions To identify the structures and organs in human reproductive systems To describe how the reproductive organs function Lesson 7Bc: Becoming pregnant Lesson 4: Implantation and cell division Objectives: To understand what happens during implantation To explain what happens during cell division To consolidate learning Lesson 5: Developing baby To recap by completing 10 questions To identify important parts that surround the developing foetus To identify and explain the difficulties in becoming pregnant Lesson 7Bd: Gestation and birth Lesson 6: Gestation and Birth Objectives: TTo understand the term gestation To identify the main stages of development To describe what happens during labour and birth in humans Lesson 7Be: Growing up Lesson 7: Growing up and puberty Objectives: To understand the term puberty and adolescence To identify the main parts of the body that change in males and females To understand the length and stages in the menstrual cycle ll extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Enjoy !!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

KS3 Unit 7A Biology - Tissues, Cells and Organs Aimed for high and low ability Year 7 but can be adapted and slides can be hidden - all information is below each slide Lesson 7Aa: Life processes Lesson 1: Objectives: To correctly use the term organism To be able to describe the life processes To identify ways in which an organism shows each life process Lesson 7Ab: ORGANS Lesson 2: Objectives: To correctly use the term organ To be able to identify several human organs To understand how to describe the functions of major human organs Lesson 3: Objectives: To be able to identify several plant organs To understand the functions of several plant organs To describe what happens in photosynthesis Lesson 7Ac: Tissues Lesson 4: Objectives: To find the learning targets using a microscope To label the parts of a microscope To use a microscope to magnify cells Lesson 5: Objectives: To follow instructions to carry out an experiment using a microscope To identify mistakes in the use of an apparatus To calculate the total microscope magnification using a formula 7Ad: Cells Lesson 6+7 : Objectives: Can be split over 2 To be able to draw a plant and animal cell To understand the functions of different parts of the cells To consolidate learning with questions Lesson 7Ae: Organ systems Lesson 8: Objectives: To be able to understand the term organ system To state the functions of several organ systems To identify and recall the main organs in each system LEsson 9: Objectives: To be able to identify the main parts in the plant water transport system To give examples on when organ transplants are needed To compare the advantages and disadvantages of transplants ll extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Enjoy !!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

KS3 Unit 8D Biology - Cells, fungi and the carbon cycle Aimed for High-Middle ability Year 8 but can be adapted for low/middle ability if required (Higher and lower slides) Further to this the lessons can also be split into two for each section - but due to time constraints and a very high ability class I was able to get through it all in 7 lessons rather than 8 lessons Lesson 8Da: Unicellular or multicellular Lesson 1- Unicellular and Multicellular organisms To state the meaning of the terms unicellular and multicellular To be able to explain the transport systems in unicellular organisms To explain the transport systems in multicellular organisms Lesson 2 - The 5 Kingdoms To recall the five kingdoms of organisms To use the key characteristics of microorganism cell structure to classify microorganisms To justify the lack of a virus kingdom Lesson 8Db: Microscopic fungi Lesson 3 - Yeast and baking bread To identify and state the functions of common parts of a yeast cell To be able to investigate the conditions under which yeast grows quickly To evaluate the experiment Lesson 4 - Yeast, alcohol production and Growth curves To explain what happens in fermentation To explain what is happening in the different parts of a growth curve To use graphs to calculate population growth rates Lesson 8Dd: Protoctists Lesson 5 - Photosynthesis To recap how to label a plant cell To describe, identify and state the parts of protoctist cells To describe what happens in photosynthesis Lesson 6 - Eutrophication To explain how eutrophication occurs and the problems associated To be able to define feeding relationships in terms of energy flow To explain how changes in physical environment affect the distribution of organisms Lesson 8De: Decomposers and carbon cycle Lesson 7 - Decomposers Lesson 8- Carbon cycle To state the names of the compounds in which carbon is held in an ecosystem To be able to explain the importance of decomposers in an ecosystem To model the recycling of carbon in an ecosystem using the carbon cycle 7 lessons including practicals (can be split to 8 if required) Targeted towards specification All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Enjoy !!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

AQA GCSE 9-1 CHEMISTRY UNIT 3.2 Amount of substance HIGHER moles, limiting reagent 4.3.2 Use of amount of substance in relation to masses of pure substances 4.3.2.1 Moles (HT only) 4.3.2.2 Amounts of substances in equations (HT only) 4.3.2.3 Using moles to balance equations (HT only) 4.3.2.4 Limiting reactants (HT only) 4.3.2.5 Concentration of solutions Content split over 6 lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Homework Homework can also be used as extension sheets in lessons - or for higher ability students Accompany with https://www.tes.com/teaching-resource/aqa-gcse-9-1-chemistry-unit-3-1-chemical-measurements-conservation-of-mass-equations-no-moles-12167318 Lesson 1 & 2: Moles basics To understand the terms molar mass and mole To know that moles are the unit for amount of substance and to be able to use the molar equation To be able to calculate the number of atoms in elements and molecules Lesson 3: Reacting masses with moles To explain balanced symbol equations in terms of moles To be able to calculate the amount of product from a given reactant To consolidate learning with exam questions Lesson 4: Balancing equations with moles To complete the moles recap starter To understand how to deduce the stoichiometry of a reaction from the masses of the reactants and products to enable us to write the balanced equation To consolidate learning with further questioning Lesson 5 & 6: Limiting reagents To understand the term ‘limiting reagent’ To be able to identify the limiting reactant in a reaction To be able to calculate the mass of the reactant from the limiting reactant using moles Lesson 7: Concentration of solutions g/dm-3 (no moles) To be able to define the term ‘concentration’ (H) To be able to convert between cm3 and dm3 To understand how to calculate the concentration of solutions in g dm-3 or g/dm3

Complete lessons, practicals, student booklet, answers, homeworks and worksheets L1 & 2 Forces, L3 & 4 Hookes law, L5 & 6 Friction, L7 gravity, L 8 balanced and unbalanced forces, L9 & 10 upthrust and density, L11 speed, L12 distance time graphs, L13 Quiz Free booklet found in my shop - it cannot be added here due to licence (AQA KS3 booklets) Enjoy

9 lessons for remote learning for Covid-19/CORONAVIRUS time at home THere are answers, step by step instructions on each powerpoint, test and even a practical along with submission requests from students. The lessons are different and interesting and will definitely engage the students at this challenging time for all of us. Package includes Lesson 1 - Genetic information Lesson 2 - Variation Worksheets for lesson 2 Lesson 3 Twins Worksheets for lesson 3 Lesson 4 - Inheritance and genetics Lesson 5 - Selective breeding Lesson 6 -breeding plants Lesson 7 - Revision and Quiz Worksheets for lesson 7 Lesson 8 - Test Lesson 9 - Mark scheme

7 lessons for remote learning for Covid-19/CORONAVIRUS time at home THere are answers, step by step instructions on each powerpoint, test and even a practical along with submission requests from students. The lessons are different and interesting and will definitely engage the students at this challenging time for all of us.

10 lessons for remote learning for Covid-19/CORONAVIRUS time at home THere are answers, step by step instructions on each powerpoint, test and even a practical along with submission requests from students. The lessons are different and interesting and will definitely engage the students at this challenging time for all of us. Package includes Instructions for teachers (telling the teachers how to organise the work) Lesson 1 - Plant Lesson 2 - Flowers Worksheets for lesson 2 Lesson 3 + 4 - Pollination Worksheets for lesson 3 + 4 Lesson 5 - Dispersal Lesson 6 -Helicopter challenge Lesson 7 - Flower dissection practical Worksheets for lesson 7 Lesson 8 - Microscopes Worksheets for Lesson 8 Lesson 9 - Short quiz with answers Lesson 10 - Test with answers

12 Lessons for remote learning for Covid-19/CORONAVIRUS time at home THere are answers, step by step instructions on each powerpoint, test and even a practical along with submission requests from students. The lessons are different and interesting and will definitely engage the students at this challenging time for all of us. Package includes Instructions for teachers (telling the teachers how to organise the work) Lesson 1: s, l G Lesson 2: Soluble and insoluble Lesson 3: Dissolving Lesson 4: Solution and mass Lesson 5: Evaporation Lesson 6: Filtering and evaporation Lesson 7 + 8: distillation Lesson 9: Chromatography Lesson 10 : Worksheets Lesson 11: Mini quiz + answers and revision lesson Lesson 12: Test (submission*)

4.6 The rate and extent of chemical change 4.6.1 Rate of reaction 4.6.1.1 Calculating rates of reactions 4.6.1.2 Factors which affect the rates of chemical reactions 4.6.1.3 Collision theory and activation energy 4.6.1.4 Catalysts Required practical 5: investigate how changes in concentration affect the rates of reactions by a method involving measuring the volume of a gas produced and a method involving a change in colour or turbidity. This should be an investigation involving developing a hypothesis. Content split over 15 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1: Measuring rates To understand reaction rates To investigate practically different methods for measuring the rate of reaction To interpret graphs that show the rate of reaction Lesson 2: Collision theory To understand why reactions take place To know 4 ways to increase the rate of reaction To be able to calculate rates from graphs Lesson 3: Graph skills To be able to calculate rates To be able to calculate rates from graphs To consolidate learning with questions Lesson 4 to 7: Surface Area L4: DEMO To watch a demonstration of surface area To explain the effect of surface area on rate of reaction To consolidate learning with questions L5 & 6 PRACTICAL 1068: Surface Area Experiment (Gas Volume / Large & Small Marble Chips) To carry out a practical investigating the effect of surface area on rate of reaction To be able to draw a graph to show your results To consolidate learning with questions L7: To complete all graphs and carry out a check To calculate the rate of reactions for each lump To consolidate learning with questions Lesson 8 & 9 RP 5 Concentration Experiment (Gas Volume / Acid Molarity/ Marble Chips) L8 To write a hypothesis To investigate the effects on the rate of reaction by changing the concentration To consolidate learning with questions L9: To explain the effects on rate of reaction using the collision theory To interpret graphs that show the rate of reaction To consolidate learning Lesson 10: PRACTICAL Investigation into the Rate Between Sodium Thiosulphate and Hydrochloric Acid To write a hypothesis To carry out a second practical to investigate concentration represented by colour change To consolidate learning Lesson 11 + 12: Temperature L11: Temperature Experiment (Gas Volume Marble Chips) To complete the match up To carry out a practical investigating the effect of temperature on rate of reaction To consolidate learning L12:

4.4.3 Electrolysis 4.4.3.1 The process of electrolysis 4.4.3.2 Electrolysis of molten ionic compounds 4.4.3.3 Using electrolysis to extract metals 4.4.3.4 Electrolysis of aqueous solutions Required practical 3: investigate what happens when aqueous solutions are electrolysed using inert electrodes. This should be an investigation involving developing a hypothesis. 4.4.3.5 Representation of reactions at electrodes as half equations (HT only) Content split over 12 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1: Electrolysis the basics To recall the properties of ionic compounds from year 9 To understand the terms electrolysis, electrolytes, anode, cathode and electrodes To explain the movement of ions during electrolysis Lesson 2 + 3 Molten PLUS DEMONSTRATION AND HT 1/2 equations To explain OILRIG in terms of electrodes To watch the demonstration of the electrolysis of lead bromide To explain how to predict the products of electrolysis of molten ionic solids with half equations (HT) Lesson 4: Extracting metals (Aluminium) To recall how metals are extracted from ores To explain how aluminium is manufactured To write half equations Lesson 5 + 6: Aqueous PLUS HT 1/2 equations To recall the preferential discharge of ions To explain how to predict the products of electrolysis of aqueous solutions To consolidate learning Lesson 7, 8 and 9: PRACTICALS and HT 1/2 equations To devise a hypothesis about the products that will be formed at the electrodes To complete a practical To consolidate learning Lesson 10: Electrolysis of Water To observe the electrolysis of water To explain the electrolysis of water To consolidate learning by reviewing the practical completed on aqueous solutions Lesson 11: Copper To investigate the change in mass of the anode and of the cathode, when copper sulfate solution is electrolysed between copper electrodes To explain how this process can be used to purify copper To explain the reactions taking place at the copper electrodes (H) Lesson 12: RUSTING To explain how experimental results can be used to show the conditions necessary for rusting To explain in detail how to prevent iron from rusting To consolidate using questions

4.5 Energy changes 4.5.1 Exothermic and endothermic reactions 4.5.1.1 Energy transfer during exothermic and endothermic reactions Required practical 4: investigate the variables that affect temperature changes in reacting solutions such as, eg acid plus metals, acid plus carbonates, neutralisations, displacement of metals. 4.5.1.2 Reaction profiles 4.5.1.3 The energy change of reactions (HT only) Content split over 11 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1: Endothermic and exothermic To recall the definitions of endothermic and exothermic reactions To list several endothermic and exothermic reactions To consolidate learning with questions Lesson 2: PRACTICALS PRACTICAL 1132 - Reaction between zinc (I want magnesium) and copper sulphate solution PRACTICAL 1134 - Investigating the reaction between calcium oxide (I want ammonium nitrate and water) and water To be able to recognise an endothermic and exothermic reaction from practical data To consolidate learning with questions To complete a 6 mark exam question Lesson 3 and 4: REQUIRED PRACTICAL To plan an experiment To complete a practical based on your plan To evaluate the practical completed Lesson 5: MEXICAN BEN (HT) To complete a 10 question recall To be able to describe these reactions in terms of bond breaking and making (HT) To be able to explain the overall heat energy change for a reaction (HT) Lesson 6: Reaction profiles To recall the terms activation energy To be able to draw and interpret simple graphical representations of energy changes occurring in chemical reactions Consolidate learning with questions Lesson 7: Energy profile To complete a 10 question check up To understand energy changes To be able to calculate the energy change in a reaction given the energies of bonds (in kJmol-1) (H)