This lesson explains the properties of typical covalent simple molecular compounds and introduces diamond and graphite as giant substances. The lesson PowerPoint and accompanying resource have been primarily designed to cover point 1.34 of the Edexcel GCSE Chemistry & Combined Science specifications but also links to points 1.35 - 1.37 where the structure and uses of the giant covalent substances are described. The lesson begins with a quick recap task where students have to recognise a covalent bond from a description and fill the missing part. Moving forwards, they are introduced to the fact that covalent molecules can be simple or giant. They are then presented with a table showing some properties of covalent molecules and having to group them as simple or giant in the short space of time that the table remains displayed on the board. This task challenges their observational skills, something which will again be tested later in the lesson as they study the structure of graphite and diamond. Time is taken to ensure that key details such as the strong covalent bonds in both sets of molecules is understood and that it is the weak intermolecular forces which are actually responsible for the low melting and boiling points. The last part of the lesson introduces diamond and graphite as allotropes of carbon and students will briefly learn why one of these conducts electricity whilst the other doesn’t. If you want a lesson about these allotropes in more detail, then please look for “Diamond and Graphite”. Progress checks have been written into the lesson at regular intervals so that students are constantly assessing their understanding and so misconceptions are quickly identified.

This lesson describes how the empirical formula of a compound can be deduced from the masses of the different parts. The PowerPoint and accompanying resources have been designed to cover points 1.44 & 1.45 of the Edexcel GCSE Chemistry specification and also covers those points in the Chemistry section of the Combined Science course. This lesson uses a step-by-step guide to walk students through the method involved in calculating the empirical formula. Students are given a template to use as they are introduced to the questions and then encouraged to work without it as the lesson progresses. The students are shown how empirical formula questions can be made more difficult and hints are given so that students are able to tackle them and access all of the marks available.

This is a concise revision resource which has been designed to cover the crucial details of topic C5 (Electricity and chemistry) of the CIE IGCSE Combined Science specification, for examination in June and November 2020 and 2021. The topic of electrolysis is commonly assessed in the examinations so time was taken during the design to ensure that understanding is constantly checked so that any misconceptions are addressed. The following content receives particular attention in this revision lesson: The use of the terms electrolyte, electrode, cathode and anode Understanding that solid ionic compounds cannot be used in electrolysis, but only electrolytes when molten or in aqueous solution The attraction of positive ions to the cathode and the gain of electrons The attraction of negative ions to the anode and the loss of electrons Predicting the products at the electrodes The lesson finishes with a summary task about the electrolysis of aluminium oxide where students have to apply their knowledge. This sheet has been differentiated two ways so that students of different abilities are able to complete the task

A fast-paced, quick lesson which focuses on the key terminology that is involved in the separation topic so that students are confident with the definitions and to use them in context. A lot of the key terms begin with the prefix SOL and the opening task challenges students to use their Chemistry knowledge to convert numbers to letters to come up with these three letters. Having completed the crossword with the 5 key terms, solute, solution, solubility, solvent and soluble, students have to match the crossword clues with each term. Moving forwards, students are introduced to the term, saturated, and briefly shown the meaning of this word. The final task of the lesson challenges the students to use each of the 6 terms beginning with S to complete a passage about salt dissolving in a water.

This lesson describes the meaning of an isotope and explains how to calculate the relative atomic mass using the relative masses and abundance of its isotopes. The PowerPoint and accompanying resources are part of the final lesson in a series of 3 lessons have been designed to cover the detail of points 1.1.4, 1.1.5 & 1.1.6 of the AQA GCSE Chemistry & Combined Science specifications. The early topic 1 lessons covered the meaning of the atomic and mass number and the calculation of the number of subatomic particles, and this lesson begins by challenging the recall of this key information. Moving forwards, a quick quiz competition is used to introduce the term “isotope” and then the students have to calculate the number of subatomic particles in K-39, K-40 and K-41 before using their answers to complete a definition about these types of substances. Time is taken to explain how isotopes are represented in standard annotation and the importance of the mass number is emphasised. A series of application questions are used to challenge them to apply their understanding and knowledge and mark schemes are embedded into the PowerPoint to allow the students to self-mark. The remainder of the lesson explains how the existence of isotopes results in some elements having relative atomic masses that are not whole numbers and then explains how these masses can be calculated. Once an example is demonstrated, the students are again given the chance to apply their understanding to a series of questions, and this exam question worksheet has been differentiated two ways

This lesson describes how the chemical formula of an ionic compound can be deduced using the formulae of the constituent ions. The PowerPoint and accompanying worksheet have been designed to cover point 1.26 of the Edexcel GCSE Chemistry specification and also cover the same point in the Chemistry section of the Combined Science course. This lesson builds on the knowledge acquired in previous lessons when students learnt how to identify the charge of an ion based on the group of the atom. A step by step guide is used to show them how the transfer method can be used to write the formulae for compounds including halides and oxides. Time is taken to introduce the formulae for sulphate, carbonate, hydroxide and nitrate ions and the students are shown how brackets may be needed when writing formulae for compounds containing these ions. Understanding checks in the form of questions and quiz competitions are used to allow the students to assess their progress

This lesson explains how to use the endings -ide and -ate when naming compounds. The lesson PowerPoint and accomapnying worksheet have been designed to cover point 1.25 of the Edexcel GCSE Chemistry specification and also covers that point in the Chemistry section of the Combined Science course The lesson begins with some simple multiple choice questions to check that students can spot the chemical symbol and definition of an element, but more importantly pick out the formula for a compound. Time is taken to go through the explanation of why substances are elements or compounds and specific examples given. A quick understanding check, in the form of a competition called “To COM or NOT TO COM”,is used to check that students can identify elements or compounds from a name or given formula. The remainder of the lesson focuses on naming compounds. Students are challenged to spot a pattern when presented with the names of two compounds, which contain 2 elements only. For both compounds that contain 2 elements or 3 or more, the rules to naming are introduced before examples are shown so that students can visualise how to construct their answer. They are then given an opportunity to apply this to a number of questions in the set tasks. The last part of the lesson moves this forward by looking at how these same rules can be applied when the chemical formula of a compound is given and this is related to another topic as they are challenged to write a word equation containing a range of compounds when presented with the symbol equation. Progress checks are written into the lesson at regular intervals so that students can constantly assess their understanding. Although this is written for Edexcel GCSE students, it is perfectly suitable for use with younger students who are learning about elements, compounds and mixtures and the teacher wants to push them onwards

This lesson introduces the alkanes as a group of hydrocarbons and explains how to draw their displayed formula and work out the general formula. The PowerPoint is part of the second lesson in a series of 2 which have been designed to cover point 7.1.1 of the AQA GCSE Chemistry & Combined Science specifications. The students were introduced to crude oil and hydrocarbons in the previous lesson so this one begins by introducing the fact that most of the hydrocarbons in crude oil are alkanes. The students are challenged to recall that covalent bonds will hold hydrogen and carbon together and they will learn that every carbon atom has four covalent bonds. This fact is used in the step by step guide as they are shown how to draw the displayed formula for methane. Moving forwards, a quick competition is used to introduce the next three members of the group in ethane, propane and butane, and the students have to apply their understanding by drawing the formula to find the molecular formula. The general formula for the alkanes is determined and then a series of exam questions will challenge them to apply this to work out numbers of carbon or hydrogen atoms or to write a formula.

This lesson describes how to calculate the relative formula mass from simple chemical formulae and for those that include brackets. The PowerPoint and the accompanying worksheet have been designed to cover point 1.43 of the Edexcel GCSE Chemistry specification and also covers that point in the Chemistry section of the Combined Science course. The lesson contains a wide range of tasks, understanding checks and quick quiz competitions to guide students through calculating the relative formula mass for substances with a range of chemical formulae. The relative formula mass is required in a lot of calculations, such as those that involve moles, so it is an important skill to get right. Worked examples are used throughout the lesson to visualise the metho for the students. Initially, students will learn how to calculate the mass from simple formulae before helpful hints are provided for harder formulae such as those that contain a bracket. Students are given the chance to apply their knowledge by proving that mass is conserved in a reaction and this prepares them for an upcoming lesson. This lesson has been written for GCSE students but could be used with higher ability KS3 students in lessons that are looking to push knowledge forward

This lesson describes the differing properties of metals and non-metals and also relates this to their position in the Periodic Table. The lesson PowerPoint has been designed to cover points 1.18, 1.40 & 1.42 of the Edexcel GCSE Chemistry specification and this also covers those same points on the Combined Science course. The lesson contains a range of tasks including guided discussion points and quick quiz competitions which will engage and motivate the students whilst introducing key properties such as malleability and the ability to conduct electricity. Time is also taken to consider where the metallic and non-metallic elements are found in the Periodic Table and a series of progress checks will challenge the students to link together properties with position.

This lesson explains the properties of the fullerenes and focuses on graphene in terms of its structure and bonding. The PowerPoint and the accompanying resources have been designed to cover point 1.38 of the Edexcel GCSE Chemistry specification and also covers that same point on the Combined Science course. The lesson begins by recalling the definition of an allotrope. The students are then introduced to graphene and will begin to understand how this covalent structure is related to graphite and will know the shared properties of these two materials. Time is taken to ensure that students can explain why graphene is able to conduct electricity. Moving forwards, students will meet the family of allotropes known as the fullerenes and will learn some important details about a few of these including C60

A fun, engaging and detailed lesson presentation (29 slides) on the properties of metals and non-metals. This lesson focuses on the key properties and their key terms such as malleable and ductile. A number of quick competitions are used to introduce these terms to the students and once provided with the definitions, the students are expected to put these properties correctly with the metals (or non-metals). Progress checks occur throughout the lesson so that the understanding of the students can be checked. This lesson is designed for both KS3 and GCSE students.

This is a detailed and engaging lesson presentation (59 slides) that combines exam questions and progress checks along with quiz competition rounds to enable students to assess their understanding of the specification content within topics C1 - 3 of the OCR GCSE Combined Science Gateway A 9 - 1 as can be assessed in Paper 3. All of the exam questions and progress checks have displayed answers as well as sections where content is recapped so that students can understand how an answer was obtained. The revision rounds in the competition include “The need to BALANCE”, “Number crazy” and “React to the REACTION”. This lesson has been designed for GCSE students.

An engaging lesson presentation (70 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit C2 (Bonding, structure and properties of matter) of the AQA GCSE Combined Science specification (specification point C5.2) The topics that are tested within the lesson include: Chemical bonds Ionic bonding Ionic compounds Properties of ionic compounds Covalent bonding Metallic bonding Properties of metals and alloys The three states of matter State symbols Structure and bonding of carbon Students will be engaged through the numerous activities including quiz rounds like “The name’s BOND…” whilst crucially being able to recognise those areas which need further attention

An engaging and informative lesson which uses a murder mystery style concept to challenge the students to use a range of identification tests to detect the cations and identify the killer. Students will enjoy the range of practical experiments which feed into the plot and allow them to find out who the owner of the belt buckle and earring back that were found at the crime scene. This lesson has been designed for GCSE students (14 - 16 year olds in the UK) but could be used as part of a forensic science project or alike

This lesson has been designed to guide GCSE students (14 - 16 year olds in the UK) through the steps involved in gas calculations. As you can see in the cover image, this lesson uses a step by step guide format to go through each of the critical stages. Hints and tips are given along the way and worked examples are used so that students can visualise how to set out their working. Important terminology such as room temperature and pressure (RTP) and limiting reactant are explained so that these do not cause issues. Students are given the opportunity to test their skills against some gas calculation questions which have detailed mark schemes and explanations to enable them to fully self-assess.

A thought-provoking lesson which explores why certain conditions are chosen for reversible reactions. Throughout this lesson, students are challenged to think about the topic in three ways. Of course, they have to consider the chosen conditions from a Scientific angle by knowing how temperature and pressure affect the position of the equilibrium. They must also think about the business (and health) side of the argument by recognising that increased pressures are both dangerous and expensive. Finally, they are taught recognise how the chosen conditions are in fact a compromise which has taken both the Science and business into account. Students are guided through the choice of conditions for the production of methanol so that they can apply their knowledge to the production of ammonia by the Haber process. This lesson has been designed for GCSE students.

This lesson has been designed for GCSE students and looks at the key details of two methods that are used to make ethanol, fermentation and the hydration of ethene. Some students may believe that the sole use of ethanol is for alcoholic drinks so the first part of the lesson uses a quick competition to introduce some additional uses. There are a number of these competitions that run during the lesson, in order to maintain engagement but also to introduce key terms and check on understanding in alternative forms. The details of each of the reactions are discussed and related topics are tested through questions and tasks, such as the students being challenged to write symbol equations and adding state symbols and to remember the identification test for carbon dioxide. The final part of the lesson plays one final competition, which is a battle between all of the students to spot which of the two reactions is being described by a clue.

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick differentiated tasks and quiz competitions to allow students to assess their knowledge of the topic of moles and related topics as covered in the GCSE Chemistry and GCSE Combined Science courses. An understanding of moles and their associated calculations is critical for the success of a student in these two courses. The following topics are covered in this revision lesson: Avogadro’s law and constant Mole calculations involving Avogadro’s constant Mole calculations involving the formula, moles = mass x molar mass Mole calculations involving the constant and the formula Moles in balanced symbol equations and identifying molar ratios of reactants or reactants to products Calculating masses in reactions Gas calculations (molar volume) Concentration of solutions (in mol per decimetre cubed) Students will be engaged through the range of activities which includes quiz competitions such as “Fill the VOID” where students have to complete some equations which have pieces missing and also “In the BALANCE” where students have to balance equations in order to work out the number of moles on each side of the reaction. This lesson can be used at any time during the year as a revision material, in the lead up to mocks or as a final revision lesson before the GCSE terminal exams.

This lesson is fully-resourced, engaging and detailed and explains how the Contact process is one of the 3 steps involved in making sulfuric acid. The PowerPoint and accompanying resources, which are differentiated, have been written to cover point C6.1(d) of the OCR Gateway A GCSE Chemistry specification. The lesson begins with a challenge where students have to use the 1st letters of the answers to questions on previously covered topics to come up with the word CONTACT. At this point, the students are introduced to the contact process as the 2nd step in a 3 stage process to make sulfuric acid. The lesson goes through the details of each of the 3 steps but particular time is spent exploring the conditions needed for the contact process in step 2. Students are continuously tested on their knowledge of reversible reactions and the key concepts to do with equilibrium position and equilibrium yield are explained so they can understand how the conditions of 2 atmospheres and 450 degrees celsius are chosen. Again through a prior knowledge check of empirical formula, the students will be introduced to vanadium oxide as the catalyst. As well as exam-style questions with displayed answers to check on current understanding, there are discussion points as well as quick quiz competitions to introduce key terms and values in a memorable way.