After a PhD in Medicinal Chemistry and some time in industry; I finally found my calling as a secondary school teacher in Chemistry.
Enjoy!
Please review the resources you buy in order for me to improve my teaching and my lessons
After a PhD in Medicinal Chemistry and some time in industry; I finally found my calling as a secondary school teacher in Chemistry.
Enjoy!
Please review the resources you buy in order for me to improve my teaching and my lessons
AQA AS Level Unit 1 Section 5 Kinetics -Collision theory, Maxwell-Boltzmann distribution, catalysts
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Unit 1 Section 5: 3.1.5 Kinetics3.1.5.1 Collision theory
LESSON 1:
Objectives:
To recall why reactions take place
To be able to calculate rates from a graph
To define the term activation energy and understand the significance
Unit 1 Section 5: 3.1.5 Kinetics 3.1.5.2 Maxwell–Boltzmann distribution 3.1.5.3 Effect of temperature on reaction rate
LESSON 2:
Objectives:
To interpret and draw Maxwell-Boltzmann distribution
To explain how temperature affects the number of molecules with energy equal to or more than the activation energy
To use the collision theory to explain the effect of temperature on the rate of reaction
Unit 1 Section 5: 3.1.5 Kinetics 3.1.5.3 Effect of temperature on reaction rate PART OF IT 3.1.5.4 Effect of concentration and pressure
LESSON 3:
Objectives:
To complete worksheets on Maxwell-Boltzmann distributions
To use collision theory, including diagrams to explain why an increase in solution concentration/pressure leads to an increase in reaction rate
To draw Maxwell-Boltzmann distributions for concentration and pressure
Unit 1 Section 5: 3.1.5 Kinetics 3.1.5.3 Effect of temperature on reaction rate 2nd part
LESSON 4: REQUIRED PRACTICAL 3
Objectives:
To understand how to measure rates of reaction
To investigate how the rate of the reaction of sodium thiosulfate with hydrochloric acid changes as the temperature of the reaction is changed.
To evaluate the practical
Unit 1 Section 5: 3.1.5 Kinetics3.1.5.5 Effect of catalysts
LESSON 5: Catalysts
OBJECTIVES
Objectives:
To define the term catalyst
To draw a reaction profile to show the impact of a catalyst on Ea
To draw a Maxwell-Boltzmann distribution curve to and use it to explain how a catalyst increases reaction rate
Homework booklet with answers
Leave feedback and enjoy !!
AQA AS and A level REQUIRED PRACTICAL Teacher Checklists
Common Practical Assessment Criteria
These documents allow you to write your class list across the top and mark the criteria during the lesson and after the lesson
EITHER:
RED, AMBER and GREEN assessment
Tick/cross method
1-10 marking
can be used to see how successful the student is as the specific CPAC.
PRACTICAL 1: Make up a volumetric solution and carry out a simple acid-base titration
PRACTICAL 2: Measurement of an enthalpy change
PRACTICAL 3: Investigation of how the rate of a reaction changes with temperature
PRACTICAL 4: Carry out simple test-tube reactions to identify cations and anions in aqueous solution
PRACTICAL 5: Distillation of a product from a reaction
PRACTICAL 6: Tests for alcohol, aldehyde, alkene and carboxylic acid
PRACTICAL 7a: Measuring the rate of reaction by an initial rate method
PRACTICAL 7b: Measuring the rate of reaction by a continuous monitoring method
PRACTICAL 8: Measuring the EMF of an electrochemical cell
PRACTICAL 9: Investigate how pH changes when a weak acid reacts with a strong base and when a strong acid reacts with a weak base
PRACTICAL 10a: Preparation of an organic solid and a test of its purity
PRACTICAL 10b: Preparation of a pure organic liquid
PRACTICAL 11: Carry out simple test-tube reactions to identify transition metal ions in aqueous solution
PRACTICAL 12: Separation of species by thin-layer chromatography
EXPLAINING CPAC:
In order to achieve a pass, students will need to have met the following expectations.
Students will be expected to develop these competencies through the acquisition of the technical skills specified in Appendix 5 of the DfE subject content for each science subject Biology, Chemistry and Physics. Students can demonstrate these competencies in any practical activity undertaken throughout the course of study. The 12 practical activities prescribed in the subject specification, which cover the requirements of Appendix 5c, will provide opportunities for demonstrating competence in all the skills identified together with the use of apparatus and practical techniques for each subject.
Students may work in groups but must be able to demonstrate and record independent evidence of their competency. This must include evidence of independent application of investigative approaches and methods to practical work.
Teachers who award a pass to their students need to be confident that the student consistently and routinely exhibits the competencies listed below before completion of the A level course.
End of year "PUB" style quiz - minus the beer.
I brought crisps and drinks into school for the last lessons
They really enjoyed it:
Round 1: Name the scientist
Round 2: Dingbats (non-science related)
Round 3: Science general knowledge
Round 4: Year 9 Chemistry (Atoms, Bonding types, Separating methods and states of matter)
Round 5: Music with a scientific theme
Round 6: Year 10 Chemistry (Moles, masses and calculations)
Round 7: General knowledge
Round 8: Anagrams
Enjoy
AQA A level 3.2.4: Periodicity
3.2.4 Properties of Period 3 elements and their oxides
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
LESSON 1
Objectives:
To recap the properties of Period 3 elements from AS
To describe the trends in the reactions of Period 3 elements with water (limited to Na and Mg)
To describe the trend in the reactions of the of the elements Na, Mg, Al, Si, P ad S with O2 Limited to the formation of Na2O, MgO, Al2O3, SiO2, P4O10 and SO2
LESSON 2:
To predict the trends
To explain the link between the physical properties of the highest oxides of the elements sodium to sulfur in terms of their structure and bonding
To consolidate with questions
LESSON 3:
To be able to describe the reactions of the oxides of elements from sodium to sulfur
To know the changes in pH of the resulting solutions across Period 3
To be able to write equations for the reactions that occur between these oxides and simple acids and bases
To be able to explain the trend in these properties in terms of the types of bonding present.
Homework booklet with answers
Leave feedback and enjoy !!
AQA AS Level Unit 1 Section 7 Oxidation, reduction + REDOX equations unit- Ionic, oxidation states
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Fully explained methods for ionic equations and all answers explained in great detail - all about oxidation states and ionic reactions a large amount of work has been put in to ensure everything is explained to the highest standards.
Oxidation, reduction + REDOX equations unit- Ionic, oxidation states:
LESSON 1:
Objectives:
To recap what is meant by ‘oxidation’ and ‘reduction’
To know what an oxidation state is
To be able to calculate an oxidation state of an element in a compound
LESSON 2 + 3
Objectives:
To be able to write half equations from balanced equations
To be able to combine half equations to make the overall balanced redox equation
To understand the terms oxidising agent and reducing agent
LESSON 4:
Optional practicals (2p)
Homework booklet with answers
Leave feedback and enjoy !!
AQA A2 Level 3.2.5 Transition metals and 3.2.6 Reactions of ions in aqueous solution COMPLETE LESSON PACKAGE plus practicals and required practicals
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
You will need a membership to Chemsheets - doesn’t have to be used with chemsheets
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Very detailed- will not suit everyone (hidden slides are extras depending on ability of class)
3.2.5 Transition metals
3.2.6 Reactions of ions in aqueous solution
3.2.5.1 General properties of the transition metals – LESSON 1 and LESSON 2 crossover (see each ppt for allocation)
3.2.5.3 Shapes of complex ions (done before subsitution reactions – starts in lesson 2)
3.2.5.2 Substitution reactions (covered all in lesson 3a)
3.2.5.4 Formation of coloured ions
3.2.5.5 Variable oxidation states
3.2.5.6 Catalysts
3.2.6 Reactions of ions in aqueous solution
Lesson 1: General properties of TM
To write the electron structure of first row transition metals and their ions and describe what a transition metal is in terms of electron structure
That these characteristics include complex formation of coloured ions, variable oxidation state and catalytic activity
Lesson 2: TM complexes and ligands
To define the terms ligand, complex, co-ordinate bond and co-ordination number
Explain the difference between and give examples of monodentatate, bidentate and multidentate ligands.
To identify the oxidation state of the metal and understand the term co-ordination number
To know about oxygen transfer by haemoglobin
Lesson 3: Shapes of TM complexes
To give examples of and sketch the shapes of octahedral, tetrahedral, square planar and linear complexes
To understand how to name complexes
To know how some complexes can show cis-trans (E–Z) or optical isomerism
To know the complexes in cisplatin and Tollen’s reagent.
Lesson 3c: Ligands subsitution
To understand ligand exchange and explain why there may be a change in co-ordination number
To describe and explain the chelate effect in terms of entropy and enthalpy
To complete a series of exam questions to consolidate
To complete a series of practical sessions to consolidate (see prac. requirements ->)
Lesson 3d Practical - Ligand displacement series
Lesson 4 + 5: Coloured ions
To describe factors that affect the colour of TM ions
To explain why TM complexes are coloured
To describe how colorimetry can be used to find the concentration of coloured ions in solution
Lessons 5b: Practical - Determining the formula of a complex ion
Lesson 6: Variable os
Lesson 6b: Practicals
Lesson 7: Redox titrations
Lesson 7b Practical
Lesson 8: Practical
Lesson 9: Catalysts
Lesson 9b: Practical
Lesson 9bi: Practical
Lesson 10, 11, 12: Reactions of ions in aqueous solution
Lesson 13: REQUIRED PRACTICAL 11
Homework booklets
AQA AS level Unit 2 COMPLETE INORGANIC CHEMISTRY: Group 2, 7 , Period 3 - Periodicity
Using the specification and books
No exam questions are included due to copy right
9 LESSONS in total AND PRACTICALS (all answers available)
Including:
Homework booklets and ANSWERS
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Section 1: Periodicity
AQA AS level Unit 2 Section 1:: Periodicity
3.2.1.1 Classification
3.2.1.2 Physical properties of the Period 3 elements
LESSON 1
Objectives:
To recap how to classify elements as s, p or d block
To describe and understand trends in 1st IE, mpt and bpt of the elements Na - Ar
To consolidate learning with exam questions
Group 2: Alkaline Earth Metals (A large number of practicals contained within - can be spread over 3 lessons)
Unit 2 Section 2: 3.2.2 Group 2, the alkaline earth metals
LESSON 1:
Chemical and physical properties
Objectives:
To recap the trends of group 2 metals: atomic radius, 1st ionisation energy and melting point
To describe and write equations for the reactions of Mg-Ba with water (PRACTICAL/DEMO)
To know the uses of Mg in the extraction of Ti and CaO in removing SO2 from flue gases
LESSON 2 + 3
Products and uses
Objectives:
To know the relative solubilities of group 2 sulfates and hydroxides (PRACTICAL)
To know the test for sulfate ions (DEMO AND PRACTICAL TESTING FOR UNKNOWNS)
To consolidate with questions
Group 7: The Halogens (A large number of practicals contained within - can be spread over 5 lessons)
Unit 2 Section 2: 3.2.3.1 Trends in properties and 3.2.3.2 Uses of chlorine and chlorate(I)
LESSON 1: PHysical and Chemical properties
Objectives:
To recap the trends of group 7 elements: atomic radius, electronegativity and melting point
To recap halogen displacement reactions from GCSE
To understand the trends in oxidising ability of the halogens (displacement reactions)
LESSON 2: Reducing abilities of Halogens
To understand how halide ions are formed
To understand the reducing ability of halide ions
To complete a practical to show the reducing power of halides illustrated by reactions of concentrated sulfuric acid
LESSON 3:
Objectives:Use of acidified silver nitrate to identify halide ions
To know how that halide ions are identified by using silver nitrate
To understand the trends in solubilities of the silver nitrates in ammonia
To complete a practical to test for halide ions using acidified silver nitrate, including the use of ammonia to distinguish the silver halides formed
LESSON 4: Required practical 4: L4–A-level Chemistry exemplar for required practical No. 4:
To carry out simple test-tube reactions in aqueous solution to identify cations (Group 2, NH4+) and anions (Group 7 (halide), OH-, CO32-, SO42-).
Objectives:
To recap the ways to identify positive and negative ions
To complete a series of test tube reactions to identify some anions and cations
To evaluate and consolidate
LESSON 5: Uses of Chorine + Chlorate (I)
Objectives:
To know the reactions of chlorine with water
To know the reaction of chlorine with sodium hydroxide and the use of this reaction
To evaluate the advantages and disadvantages of adding chemicals to water
AQA A2 Level Electochemical cells (3.1.11) - Electrochemical series complete lesson package
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
You will need a membership to Chemsheets - doesn’t have to be used with chemsheets
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Very detailed- will not suit everyone (hidden slides are extras depending on ability of class)
3.1.11 Electrochemical cells
3.1.11.1 Electrode potentials and cells
3.1.11.2 Commercial applications of electrochemical cells
LESSON 1: Recap
L1- Oxidation and Reduction from AS-Level
AS LINK https://www.tes.com/teaching-resource/resource-12099917
Exam Q
Objectives:
To familiarize yourselves with the key concepts of oxidation states from AS Chemistry
To recap redox reactions
To recall the terms oxidising agent and reducing agent
L1b Exam question consolidation *
L2a Electrochemical cells PART 1
The potential of an electrode
To know the importance of the conditions when measuring the electrode potential, E (Nernst equation not needed)
To understand how cells are used to measure electrode potentials by reference to standard hydrogen electrode
L2b Electrochemical cells PART 2
The secondary standard
The Daniell cell and representing electrochemical cells
To add a sign to the cell voltage on cell diagrams
To understand what happens to the emf when changing conditions
L3 PRACTICAL
Method, questions, results (no tech sheet)
L4 PRACTICAL - varying concentration
Method, questions and results (no tech sheet)
L5 The electrochemical series
To know that standard electrode potentials are listed in an electrochemical series
To work out overall equations by using the electrochemical series
To use the electrochemical series to predict the direction of simple redox reactions
To choose a suitable RAD or OAT
L5c Exam question consolidation * LINK BELOW
L5d Redox Titrations and electrochemical cells
To understand why HCl cannot be used in certain redox titrations
To understand why some spontaneous reactions do not occur
To understand how to determine the species present in solution at the end of the reaction
L6 + 7 Applying electrochemistry (working alongside L7b Exam question consolidation) *
To understand that electrochemical cells can be used as a commercial source of electrical energy, and that cells can be non-rechargable (irreversible), rechargable or fuel cells
To be able to use given electrode data to deduce the reactions occurring in non-rechargeable and rechargeable cells and to deduce the e.m.f. of a cell
To explain how some cells can be recharged
To explain how a hydrogen fuel cell works
Understand the electrode reactions of a hydrogen-oxygen fuel cell and appreciate that a fuel cell does not need to be electrically recharged
Evaluate the benefits and risks associated with uses these cells.
L8 REQUIRED PRACTICAL 8
*can’t publish ex
AQA AS Level Unit 3 Section 4 Organic analysis: Infrared, High resolution mass spec, Required prac 6- test tube reactions
3.3.6 Organic analysis 3.3.6.1 Identification of functional groups by test-tube reactions
LESSON 1: Required practical 6:
Objectives:
To understand how to test for different functional groups
To carry out test-tube reactions to distinguish between alcohols, aldehydes, alkenes and carboxylic acids
To interpret observations from these reactions and write equations for these reactions
3.3.6 Organic analysis 3.3.6.2 Mass spectrometry
LESSON 2: HRMS
Objectives:
To know what a molecular ion is
To know what a molecular ion shows
To explain what a high resolution mass spectrum can show
3.3.6 Organic analysis 3.3.6.4 Infrared spectroscopy
LESSON 3: Infra-red mass spec
Objectives:
To understand how an intra-red spectrometer works
To identify functional groups from intra-red spectra and what the fingerprint region and where it is found
To understand the link between absorption of infrared radiation by bond in CO2, methane and water vapour and global warming
PLENARY GAME
Homework booklet with answers
Leave feedback and enjoy !!
Edexcel 9-1 Chemistry formulas
All the formulas contained with the SEPARATE science topics condensed into one table.
Students can stick this in their books
A mini test is also present, students can be tested regularly throughout the year to check if they are revising or SIMPLY ADD THE FORMULAS AS YOU GO
Enjoy !!!!
PLEASE LEAVE FEEDBACK and REVIEWS
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Edexcel CC5 Ionic bonding for the new 9-1 GCSE
Edexcel CC6 Covalent bonding for the new 9-1 GCSE
Edexcel CC7 Types of substance for the new 9-1 GCSE
TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017
Covering on the Mat:
CC5a Ionic bonds
CC5b Ionic lattices
CC5c Properties of ionic compounds
CC6a Covalent bonding
CC7a Molecular compounds
CC7b Allotropes of Carbon
CC7c Properties of metals
CC7d Bonding models
Revision mat summary sheet
Revision mat summary sheet answers for the teacher
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Edexcel CC12 Reversible reaction and Equilibria for the new 9-1 GCSE
TOPIC 4 Extracting metals and Equilibria PAPER 1 - NEW for SEPTEMBER 2017
Learning objectives:
LOWER
To be able to explain what is meant by the term dynamic equilibrium
To be able to describe the manufacture of ammonia
To be able to interpret graphs associated with the manufacture of ammonia to recall the ideal conditions
HIGHER
To recall how the position of a dynamic equilibrium is changed
To understand Le Chatelier’s Principle (H)
To predict how the position of the equilibrium is affected by changes in temperature, pressure and concentration (H)
All extension questions available on each slide
Answers all underneath each slide
Support also available where necessary
AfL sections and mini quizzes
Reducing the need for photocopying
Main topics include:
- WHat is meant by dynamic equilibrium?
- How is ammonia manufactured?
- HIGHER How do changes in the temperature, pressure and concentration affect the equilibrium position? (Start towards higher lesson Sc15b Fractors affecting equilibrium - which comes later in the spec)
Enjoy !!!!All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
PLEASE LEAVE FEEDBACK and REVIEWS
AQA AS Level Unit 1 Section 6 Equilibria-Catalysts, Chemical equilibria, Le Chatelier’s principle and Kc
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Unit 1 Section 6: 3.1.6 Chemical equilibria, Le Chatelier’s principle and Kc
3.1.6.1 Chemical equilibria and Le Chatelier’s principle
LESSON 1:
Objectives:
To understand how reversible reactions can reach a state of dynamic equilibrium
To understand Le Chatelier’s principle
To apply Le Chatelier’s principle to reversible reactions
LESSON 2: Equilibrium and Industry
Objectives:
To explain why compromises are made for the production of ammonia
To explain why compromises are made for the production of Ethanol
To explain why compromises are made for the production of Methanol
Unit 1 Section 6: 3.1.6 Chemical equilibria, Le Chatelier’s principle and Kc3.1.6.2 Equilibrium constant Kc for homogeneous systems
LESSON 3:
Objectives:
To understand what the Equilibrium Constant, Kc is
To write an expression for Kc including units
To calculate Kc including units
LESSON 4:
Objectives:
To understand how to work out moles at equilibrium
To calculate Kc after calculating moles
To know how to use Kc to work out the composition of an equilibrium mixture
To know how to use Kc to calculate the amount of reactant needed
LESSON 5:
Objectives:
To predict the effect, if any, of the changes in conditions on the value of Kc
To predict qualitatively how the value of Kc will change, if at all, as the position of an equilibrium moves as conditions are changed
To consolidate learning
Homework booklet with answers
Leave feedback and enjoy !!
AQA AS level Unit 3 Section 3: 3.3.4 Alkenes
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Alkenes section
Introduction to alkenes
Lesson 1:
Objectives:
To recall what alkenes are
To understand what isomerism do alkenes display
To explain why alkenes are reactive
Electrophilic addition
Lesson 2:
Objectives:
To understand what electrophilic addition reactions are
To understand the reactions of alkenes with different electrophiles
To understand what happens with asymmetrical alkenes
Additional Polymerisation
Lesson 3:
Objectives:
To recall the terms polymer, monomer and polymerisation
To explain additional polymerisation reactions
To know some uses of polymers
Mechanism recap
Lesson 4: no powerpoint just questions
Leave feedback and enjoy !!
AQA AS Level Unit 2 Section 2 Group 2 elements alkaline earth metals - trends, solubility, test ion
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Group 2: Alkaline Earth Metals (A large number of practicals contained within - can be spread over 3 lessons)
Unit 2 Section 2: 3.2.2 Group 2, the alkaline earth metals
LESSON 1:
Chemical and physical properties
Objectives:
To recap the trends of group 2 metals: atomic radius, 1st ionisation energy and melting point
To describe and write equations for the reactions of Mg-Ba with water (PRACTICAL/DEMO)
To know the uses of Mg in the extraction of Ti and CaO in removing SO2 from flue gases
LESSON 2 + 3
Products and uses
Objectives:
To know the relative solubilities of group 2 sulfates and hydroxides (PRACTICAL)
To know the test for sulfate ions (DEMO AND PRACTICAL TESTING FOR UNKNOWNS)
To consolidate with questions
Homework booklet with answers
Leave feedback and enjoy !!
Read less
AQA AS Level Unit 1 Section 4 Energetics -Hess’s Law, Bond enthalpy, Enthalpy Change, Endothermic, Exothermic
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Unit 1 Section 4: 3.1.4 Energetics#
3.1.4.1 Enthalpy change
Endothermic and Exothermic Reaction Basics
LESSON 1:
Objectives:
To know the reactions can be exothermic or endothermic
To know what an enthalpy change is
To define standard enthalpies or formation and combustion
Unit 1 Section 4: 3.1.4 Energetics
3.1.4.2 Calorimetry
Measuring Enthalpy Change
LESSON 2:
Objectives:
To define specific heat capacity
To describe how you measure enthalpy changes more accurately
To calculate the enthalpy of a reaction
LESSON 3:
Objectives: PRACTICAL CHOICES
To investigate the enthalpies change of a neutralisation reaction and allow for heat loss.
To investigate the enthalpies change of a displacement reaction and allow for heat loss.
To investigate the enthalpies change of a combustion reaction and allow for heat loss.
Unit 1 Section 4: 3.1.4 Energetics
3.1.4.3 Applications of Hess’s law
LESSON 4: Enthalpy of Formation
Objectives:
To understand the term Hess’s Law
To construct simple energy cycles
To carry out calculations using the enthalpy of formation
LESSON 5: Enthalpy of Combustion
To recall all definitions
To carry out calculation using enthalpy of combustion
To consolidate learning with exam style questions
Unit 1 Section 4: 3.1.4 Energetics
3.1.4.3 Applications of Hess’s law – REQUIRED PRACTICAL 2
LESSON 6: Required Practical
To understand what method to research
To determine an enthalpy change which cannot be measured directly.
To calculate the enthalpy change of the reaction
Unit 1 Section 4: 3.1.4 Energetics
3.1.4.4 Bond enthalpies
LESSON 7: Bond Enthalpy
To understand the term mean bond enthalpy
To use the mean bond enthalpies to calculate approximate values for ∆H for reactions
To consolidate with exam questions
Homework booklet with answers
Leave feedback and enjoy !!
Edexcel CC9b PART 1-3 Calculations involving masses for the new 9-1 GCSE
TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017
REVISION MAT
USED FOR REVISION OF CC9a and CC9b (Moles not included in this mat)
ANSWERS ADDED FOR THE TEACHER COPY
All extension questions available on each slide
Answers all underneath each slide
Support also available where necessary
AfL sections and mini quizzes
Reducing the need for photocopying
Main topics include:
- Balancing equations
- How do you calculate masses of reactants and products from balanced equations given the mass of 1 substance
- conservation of mass in non-enclosed and closed systems
- How does the law of conservation of mass explain why magnesium increases mass when it is burned and how copper carbonate reduces its mass when thermal decompostion occurs
-What is concentration?
-Concentration of solution
- converting between cm3 and dm3
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Enjoy !!!!
PLEASE LEAVE FEEDBACK and REVIEWS
AQA A2 Level Unit 4 Section 19 Equilibria-Catalysts, Chemical equilibria, Le Chatelier’s principle and Kp
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Unit 4 Section 19: 3.1.10 Equilibrium constant Kp for homogeneous systems
3.1.10 Equilibrium constant Kp for homogeneous systems
The further study of equilibria considers how the mathematical expression for the equilibrium constant Kp enables us to calculate how an equilibrium yield will be influenced by the partial pressures of reactants and products. This has important consequences for many industrial processes.
Prior knowledge:
AS Chemistry
3.1.6 – Chemical equilibria, Le Châtelier’s principle and Kc (see previous lesson package) https://www.tes.com/teaching-resource/aqa-as-level-unit-1-section-6-equilibria-chemical-equilibria-le-chatelier-s-principle-and-kc-12099340
LESSON 1: Recap
Objectives:
To recall the equilibrium constant Kc
To calculate Kc
To consolidate learning by completing exam questions
LESSON 2: Introduction to partial pressures
Objectives:
To state what is meant by partial pressure
To apply the equilibrium law to gaseous equilibria
To consolidate learning with questions
LESSON 3 + 4: Rate equations Kp
Objectives:
To calculate mole fraction and partial pressure
To calculate Kp
To consolidate learning with questions
LESSON 5: Changing conditions
Objectives:
To predict the qualitative effects of changes in temperature and pressure on the position of the equilibrium and the value of Kp
To explain the affect of a catalyst on Kp
To consolidate learning with questions
Homework booklet with answers
Leave feedback and enjoy !!
Edexcel 9-1 CC11 Revision MAT / SHEET for Obtaining and using metals
TOPIC 4 Extracting metals and Equilibria PAPER 1 - NEW for SEPTEMBER 2017
PLEASE NOTE - THESE MATS ARE MEANT TO BE PHOTOCOPIED AND LAMINATED FOR STUDENTS TO WORK ON PAPER (DUE TO LIMITED PHOTOCOPYING WITHIN THE DEPARTMENT CURRENTLY); THEY CAN BE ADAPTED SO STUDENTS CAN WRITE ON THEM BUT THAT IS ENTIRELY YOUR CHOICE
2 mats in total
REVISION MATs - PART 1, 2 (with MOST answers - others are self-explanatory) for CC11
USED FOR REVISION OF Obtaining and using metals
Main topics include:
Reactivity series,
Metals,
Ores,
Pure substances
Mining,
Extraction,
Oxidation
Reduction
OIL RIG
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Enjoy !!!
PLEASE LEAVE FEEDBACK and REVIEWS
PAPER 2- NEW for SEPTEMBER 2017
Revision checklist for students for CHEMISTRY ONLY (March 2017)
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Enjoy !!!!
Please leave a comment and rate