This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P4 ’Space’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the phases of the Moon, students are shown a diagram which show the changing appearance of the Moon as seen by Earth as the Moon orbits the Earth. The next task is a memory test, students will be shown images of the different phases of the Moon along with the names of these specific phases. Students will need to memorise the as many names as possible, before the names are taken away. Students will now have a few minutes to fill in their worksheet with the correct names, this task can then be self-assessed using the mark scheme provided. Next, students will complete a worksheet which requires them to shade in circles to show the phases of the Moon at particular positions. There is an extra challenge task to add labels to show the names for each phase. The mark scheme for this task is included in the PowerPoint so students can mark and correct their work. Next, students will watch a video on eclipses. Whilst watching the video they will answer a set of questions, once complete students can self-assess their work using the mark scheme provided. Laslty, students will complete a ‘copy-and-complete’ task to summarise what they have learned this lesson. This work can also be marked using the answers provided on the PowerPoint. The plenary task is a ‘pick a plenary’ - either unscramble a set of anagrams to spell five key words taken from the lesson today or use a set of key words (provided) to summarise what students have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to different examples of exothermic reactions, this includes video links to more exciting exothermic reactions like the thermite reaction and the screaming jelly baby. Students are also told the definition for an exothermic reaction. Students are now asked to consider what an endothermic reaction is, now that they know the definition for an exothermic reaction. Students are asked to ‘think > pair > share’ their ideas, eventually feeding back into a class discussion and the definition can then be revealed, as well as two two examples. Students will now watch a video on exothermic and endothermic reactions, whilst watching the video they will answer a set of questions. Once this task has been completed, students can self-assess their work against the mark scheme provided on the PowerPoint. Students will now complete an investigation to identify whether a set of three chemical reactions are exothermic or endothermic. They will start the reaction and then measure the temperature over a set period of time, finally working out the change in temperature to determine which type of reaction has occurred. Students can follow instructions on the practical worksheet and record their results in a table drawn into their books. Finally, students will complete a ‘quick check’ task - whereby they will need to answer a question on the topic of the lesson, this can then be checked against the answer provided on the PowerPoint. The plenary task is an anagram challenge, students need to unscramble a set of anagrams which then spell out a set of key words from the last few lessons on reactions. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be shown a demonstration of magnesium being burnt in air, students are asked to predict whether they think the mass of the product will increase, decrease or stay the same. Students are asked to explain their prediction. The demonstration is then carried out, students should record in their books the mass of the magnesium before burning and then the mass of the magnesium oxide after burning, from this they can deduce the mass of the oxygen needed to burn the magnesium. Students can then check their predictions to see if they were correct or not. Now, students can summarise what they have learned by completing a ‘fill-in-the-blank’ task which is a definition for the ‘conservation of mass’ in chemical reactions. This task can be self-assessed against the mark scheme provided. Students will now also complete a ‘Quick Check’ task where they are asked come questions to test their knowledge of what they have learned so far, this work can also be marked against the mark scheme provided. Students will not complete a match-up task, students are asked to complete the sentences by matching the correct phrases together. This helps students to explore the idea of the law of the conservation of mass, considering how this applies to reactions involving solids, liquids and gases. Again, the mark scheme for this task is included for students to check and correct their work. The latter part of the lesson is on balancing equations, students are firstly introduced to the process by which students should balance an equation, demonstrated by the example of magnesium + oxygen -> magnesium oxide. A few more examples are used to talk students through the process, then students will complete a step-by-step worksheet which introduces them to balancing equations at a basic level. The mark scheme for this task is included in the PowerPoint for students to self-assess their work. The plenary task requires students to complete a 3-2-1 reduction of the lesson, to include 3 facts 2 key words and 1 question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P3 ’Light’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students are firstly introduced to the idea of ‘white light’ being split up into the colours of the rainbow. They are then shown a diagram of a ray of white light hitting a prism, which then leads to the refraction of this light - showing the colours of the rainbow from red to violet. Students can sketch a diagram of this into their books, indicating the most refracted and least refracted colours. Students are then shown a diagram which indicated how primary colours can be mixed together in various combinations to make secondary colours. The next part of the lesson, students will focus on how we observe different coloured objects. White light will bounce off an object, the colour the object appears depends on the colour of light that it reflects. Various diagrams are shown to students to demonstrate this point, they could sketch a copy of one of the diagrams or draw their own version in their books. They are then given a worksheet to assess their knowledge of what they have learned so far this lesson, extension questions are included for higher ability students. This work can be self-assessed using the mark scheme provided once it is complete. Students are now shown what happens to the appearance of objects when they are seen in coloured light rather than white light - coloured objects will only reflect the colour it is and will absorb any other colours - which means it appears to be black. Lastly, students are shown how filters are used to subtract light. Students will then complete a progress check to assess their knowledge of what they have learned this lesson, the mark scheme for this task is included on the PowerPoint. Students can then self-assess their answers using the mark scheme provided. The plenary requires students to write down 3 facts from the lesson, 3 key words and 1 question to test their peers knowledge of what they have learned. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P1 ’Forces’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with ‘Think > Pair > Share’ activity which asks students to look at a photo of a tug-of-war and asks students to decide which side would win and why. After a short discussion, students will be introduced to the idea of ‘balanced’ and ‘unbalanced’ forces, including examples. Students will now complete an investigation on ‘Forces’, this is a circus activity which requires students to decide which two forces are acting on each of the objects. Students will also need to decide if the forces are balanced or unbalanced, their results can be recorded in the table provided. Students will be asked a series of questions on the effects of balanced and unbalanced forces acting upon an object, the first questions is on a cyclist. This work can then be self-assessed using the mark scheme provided. The next questions are on the forces acting upon a car, this can be competed in their books and the work can be marked and corrected using the mark scheme provided. The last part of the lesson focuses on how forces can change the direction of an object, students are shown the example of the Moon orbiting the Earth due to the pull of gravitational force acting upon the Moon. The plenary task requires students to write down three facts, three key words and pose one question to test their peers knowledge of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C4 ’Acids & Alkalis’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on the pH scale, students are given some information about the pH scale and will need to answer a set of questions using this information. Next, students will be given a table of information about the pH of different substances, using this they will need to sort the substances into two groups in their books - acids or alkalis. This task can be self-assessed using the mark scheme once completed. Students will now conduct an investigation to determine what happens when an acid is mixed with an alkali. Students will follow the method provided on the PowerPoint, using this they should observe the universal indicator changing from red to green as a neutralisation reaction occurs. Students can then use the information provided on the PowerPoint to take notes on this topic. Next, students will watch a video on pH, they will need to answer a set of questions whilst watching the video. This activity can be self-assessed once complete, using the mark scheme provided. Lastly, students are provided with a set of information on the uses of neutralisation reactions. Students should read the information and then summarise what they have learned in three sentences. The plenary task requires students to write a twitter message to tell other people what they have learned this lesson, including #keywords! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on the stages involved in fertilisation, students will be asked to rearrange a set of sentences into the correct order to correctly describe the process of fertilisation. Seed dispersal is now introduced, firstly students are asked to consider two questions - why the parent plant wants to disperse seeds away from itself and what are the main methods of seed dispersal that we already know of. Students can discuss the answers to these questions in pairs before feeding back into a class discussion, the answers to these questions can then be revealed. Next, students will be given a worksheet of questions and will then watch a video on various methods of seed dispersal. Students will need to answer the questions whilst watching the video, the mark scheme for this task is included in the PowerPoint for students to self-assess their work once it is complete. The last task is a progress check, whereby students will need to copy and complete a paragraph which describes the importance of seed dispersal. Students can either peer-assess or self-assess their work using the answers provided once this is complete. The plenary requires students to create three quiz questions to test their peers knowledge of what they have learned so far this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the levels of organisation found within multicellular organisms. Students are then asked to sort the following into the correct order, according to size: cell, organ system, tissue and organ. Students are then shown the definitions for each of the following: cells, tissues and organs before being asked to complete a mind map of organ systems they alread know of. After spending a few minutes on this task, some of the example answers can be revealed for pupils to mark their work. Students are now given a list of organs and are asked to pick the organs which belong to the digestive system, respiratory system and water transport system of plants. Once this task has been completed, students can self-assess their work using the mark scheme provided. The next activity requires students to match the correct organ system name to the correct role of that organ system and then pupils need to complete a fill-in-the-blank task, the answers to both these tasks are included in the PowerPoint for students to self-assess their work. Lastly, students are given a card sort containing organs/cells/tissues - students will need to match the correct cell to the correct tissue and then organ, this can be stuck into a table in their books. This work can then be self-assessed using the mark scheme provided. Students will finally complete a ‘Team Poster Challenge’ to end the lesson. The plenary requires to spend one minute talking to the person next to them about what they have learned this lesson! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the gases that we breathe in and out of our bodies, via the respiratory system. Students will then be shown a diagram of the main components of the respiratory system, they will have 3 minutes to try to remember the locations of as many structures as possible. The image will then be taken away and they will be give a blank worksheet, without the labels, now they will need to correctly identify as many structures as they can remember. This work is then self-assessed using the mark scheme provided. The next activity requires students to watch a video, whilst watching they will need to answer a set of questions about the structure and function of the respiratory system. Once complete students can self-assess their work using the mark scheme provided. The next part of the lesson focuses on composition of gases in inhaled air vs. exhaled air. Students will be given a worksheet which provides some data on the percentage composition of gases in inhaled vs. exhaled air, students will need to answer questions using this information. The mark scheme for this task is included in the PowerPoint for students to assess their work once it is complete. The plenary task requires students to complete an exit card which will include 3 things learned this lesson, 5 key words and 1 question to test your peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.1 Health & Lifestyle. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction into what happens to your food during the process of digestion, students are shown a diagram which demonstrates how large, insoluble food molecules are broken down into small, soluble ones. This follows into the definition and role of the human digestive system, students now need to discuss their ideas of the names of organs present in the digestive system. After a short class discussion, students will now complete a ‘Memory Test’ task. Students will need be shown a diagram of the human digestive system with organs labelled. They will have a few minutes to memorise the names of the organs of the digestive system, the labels will be taken away and then students need to try to remember as many of them as possible, by labelling their own digestive system worksheet. This task can be self-assessed once it is competed. Next, students will be given an information sheet in pairs. Students will need to read the information sheet and using this write a description of the roles of a set of organs present in the digestive system. Once complete, students can mark and correct their work using the answers provided in the PowerPoint. Lastly, students are shown a diagram of the villi which are present in the small intestine. Students will need to describe the adaptations of the villi which aid the role of absorption of small molecules into the bloodstream. The final activity requires students to find ten word, all related to the digestive system, in a word search. The plenary activity is a set of answers, students will need to write the questions which match up these answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. This lesson begins with an introduction to current & charge, students are provided with the definition for current and told that an ammeter is the component used to measure current, in amps. Students will then watch a short video on current, during which they will need to answer a couple of questions. Students can mark their work once this is complete. Students are then told the role of the battery in the circuit, as the store of energy which provides the push which gets the current flowing, pushing the charge around the circuit. Next, students are introduced to electrical circuit diagrams, they are firstly shown a simple circuit diagram and are asked to label the components indicated from a list of key words: switch, battery and bulb. After students have drawn the circuit and had a go at labelling it, the answers can be revealed so they can mark and assess their work. Students are now given a set of instructions to draw 4 different circuit diagrams, the answers to this task are included in the PowerPoint so students can self-assess their work using the mark scheme provided. Lastly, students will complete a task which requires them to match sentences starters to the correct sentence enders, to assess their knowledge of what they have learned this lessons. This task can then be either self-assessed or peer-assessed using the mark scheme provided. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Homeostasis' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by pupils being provided with the aim of the investigation plus an equipment list, pupils will need to use this to decide what the independent, dependent and control variables of the practical may be. The next slide runs through some of the important details of the practical, using this pupils will then need to write a step-by-step method summarising how they are planning to conduct their investigation, they can work in groups to plan this but must complete their own worksheet. Next, pupil will conduct the experiment to measure the effect of a distraction on student volunteers reaction time. Results should be collected using the worksheet provided, once they have collected their raw data they can use this (as well as the calculation provided) to work out the reaction time for each volunteer in each trial, and a mean can be calculated. Once the second table of results on the calculated reaction times have been filled in pupils can complete their graph of results, this can then be used to write a conclusion using prompt questions provided on the plenary slide of the PowerPoint presentation. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a resource aimed at the NEW GCSE Physics specification on ‘Energy’. Other lessons from this series can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by considering objects with elastic potential energy stores. The calculation for the elastic potential energy store of an object is introduced and pupils can have a go at rearranging it themselves. **If lower ability - you can go through this on the board** Pupils then copy and complete the table which leads them through the different stages to this calculation, they can then self-assess their work using a red pen. The next two slides are questions pupils can complete to work out the elastic potential energy stores of various objects, these questions can be self-assessed. The final activity is a past-paper question task (worksheet provided at the end of the PowerPoint) whereby pupils complete the questions, pass to their peers and peers will mark the work using the mark scheme provided on the PowerPoint. Peers should provide a positive comment, negative comment and something to improve. All resources for this lesson are included at the end of the PowerPoint presentation. Thanks & enjoy :)

This lesson is designed for the NEW AQA AS-level Biology course, particularly the ‘Cells’ module. For more lessons designed to meet specification points for the NEW AQA A-level Biology course please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience A-Level lesson format: I teach in more of a lecture style compared to GCSE. In the majority of my A-level lessons the beginning portion of the lesson is mainly teacher-led, where students are expected to take notes onto a handout/in their books. This is then mixed in with student-led activities, as well as questions and exam prep. You will find some of my slides have blank spaces for you to add more detail/descriptions/explanations. If you look at the ‘Notes’ section underneath each of these slides, you will find additional content which you can add in as you teach! To begin this lesson on cancer, students will review their knowledge of cell processes. They should be able to describe mitosis, the prophase, and cytokinesis in detail. For a quick recap on mitosis students will watch a short video, then use their mini whiteboards to name cell cycles and their roles based the images on the following slides! Students will then learn to calculate miotic index (MI). The following slide features an exam-style chart for them to practice calculating MI values. They will then learn to calculate the time a cell spends in each stage and complete example calculations by showing all of their working on their mini whiteboards. Answers for self-assessment are on the following slide. Using their knowledge on MI and cell stage time students will begin to think about cancer. They should make note of the definitions of key words before moving on. Students will then watch a short video on the cancer genome project and answer four questions in their books while watching. Answers are provided for self-assessment. The cell cycle is controlled at three checkpoints, at which the cell can continue or stop production. Students should make clear note in their books before moving on to discuss how these checkpoints are relevant to cancer. The following slides define proto-oncogenes, oncogenes, and mutated tumour suppressor genes, so students should be able to explain how mutations cause cancer. Students are then taught how cancer treatment works in the cell cycle. The following slide considers the cellular side-effects of treating cancer. To consolidate students will practise an exam-style fill in the blank task. Answers are on the following slide for self-assessment. The plenary task is for students to draft a WhatsApp message to a friend explaining what they have learned about cancer in this lesson. All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson from the NEW AQA specification on defence mechanisms of the body, from the ‘Infection and Response’ module. This lesson is part of a 12 lesson bundle for the NEW ‘Infection & Response’ Unit, found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by recapping on what a communicable disease is and what risk factors can increase the likelihood of a communicable disease spreading from person to person. Students are then given an outline of a human body, they will need to label it with the various different ways pathogens can enter the body. Pupils can then mark and check their work against the examples on the PowerPoint slide. Students then discuss how your body may stop pathogens entering via these various different entry routes and you can use the information on the PowerPoint slide to highlight these various defence mechanisms. Pupils can spend time annotating their diagram to display these defences and peer-assess their work - R/A/G. Next, is the introduction of white blood cells, you can explain their different roles using the diagrams on the PowerPoint slide and by use of the video/animation links. Pupils should then fill in a table of information using as many key words as possible, pupils should self-assess their work to check for the correct use of the key terms. Plenary - past-paper question which I get pupils to complete in silence and hand to me as they leave (exit card). I will then mark and grade it for the next lesson, but equally they could complete and mark within the lesson. All resources are included within the PowerPoint presentation. Enjoy :)

This is a lesson designed to meet specification points for the new OCR GCSE (Gateway) Biology 'Scaling up’ scheme of work. The lesson begins by completing an activity which recaps the role of each of the components of blood. Pupils are then introduced to the three types of blood vessels - artery, vein and capillary. Looking at a diagram provided pupils will need to consider the differences between the three in terms of structure an function. Pupils will then watch a video and answer questions about arteries and capillaries, the answers to the video are provided so that pupils can then self-assess their work. The next slide will show how veins are structured and how they work to move blood back to heart from the rest of the body. Pupils could draw a diagram to represent this if there was time. The next part of the lesson is the longest activity, pupils will need to either copy the blank table into their books or be given a printout of the table. Using cards of information pupils will need to complete the table, which shows the structural features of each of the blood vessels. The answers to this activity are provided so that pupils can either peer or self-assess their work. The next activity is a quick fill-in-the-blank task to demonstrate the role of the capillaries within the body. Students are now introduced to the idea of a double-circulatory system, using a diagram and a description of the system pupils will need to answer questions about the role of this system, which can then be self-assessed. The plenary task is for pupils to pick one question to answer from a list of traffic-light questions, green for most difficult and red for easiest.

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the elements found within Group 0 of the Periodic Table - The Noble Gases. Students will learn about some of the chemical properties of these gases within the introduction. Next, students will be given data on some of the physical properties of the Noble Gases. Students will be shown their melting points and boiling points and will need to answer some questions based on this data. Once this task has been completed, students will then self-assess their work using the mark scheme provided. Students will now learn about the uses of different gases of the Group 0 elements, students will each be given a piece of information on a particular gas. Students will now need to share information with each other in order to complete a summary table. This work can the be marked and corrected using the mark scheme that is provided in the PowerPoint. Students will now complete a ‘copy and correct’ task, students will need to copy the paragraph of information and correct any mistakes. The answers to this task can the be used by students to mark and correct their work. The students will now complete a ‘Who am I?’ task, students will be given a description of an element which will either be from Group 1, Group 0 or Group 7, students will need to decide which element it is describing. Once this task has been completed, students should then self or peer assess their work using the mark scheme provided. The plenary lesson requires students to summarise what they have learned in three sentences, using the key words provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Cells’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 8 B2.1 Module on ‘Separation Techniques’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)