This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by introducing the concept of ‘work done’, by using the example of a cyclist on a bike. The first task the pupils will need to complete is to produce a mind map of activities which require work to be done in order for something to happen. Students can discuss their ideas with their partners, they can write their ideas down into their books and then check their work against the answers provided in the PowerPoint. Pupils are then shown the equation to calculate work done and they can work through a model question. You can work through this question with pupils on the board or ask them to try and complete it in their books, students can then self-assess their work. The main activity for this lesson is a practical activity, the method for this practical is included in the PowerPoint presentation. Pupils will drag a wooden block across the desk a measured distance, the wooden block will be dragged initially with no elastic bands around it and then with one elastic band and finally with two elastic bands. Pupils will measure the force applied to drag the block using a Newton meter and record their results in a table (table included at the end of the PowerPoint). Using the measured distance and the force applied pupils can then work out the work done to drag each type of wooden block. Students will now complete a ‘quick check’ task whereby students will need to complete a set of problems on ‘work done’ calculations. Once complete, students can self-assess their work against the answers provided. Finally, students are given a worksheet of problems which have been completed by another pupil. Students will need to mark and correct the work, making corrections where necessary. This task can then be marked and assessed using the mark scheme provided. The plenary task requires students to write a twitter message to explain what they have learned today, including #keywords. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Electricity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction into how to draw electrical circuit diagrams, a diagram is shown and students need to identify the correct components using the labels provided. The next part of the lesson focuses on the roles of different electrical components, students will each be given a different piece of information about a component. They can then walk around the room, sharing information with each other in order to complete a table on the components and their roles. This work can then be self-assessed once students have completed it. The next task will assess students understanding of these components in a ‘Quick Check - Who am I ?’ task. Pupils will need to identify the component from the description given, they can write their answers in their books and then check their work against the answers when they are revealed. Pupils will the be reminded of the rules on how to draw a circuit diagram, before being given a list of descriptions of different circuits. Students need to draw the circuits that are being described, the answers to this task can then be revealed using the mark scheme in the PowerPoint presentation. The last part of the lesson will require pupils to construct electrical circuits using electrical equipment, three diagrams of electrical circuits are provided to students, they need to use these to construct their own circuits. The plenary task requires pupils to complete a word search, once the words have been found they should write a definition of each of them All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Electricity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a video on electrical current and charge flow, students will need to answer a set of questions whilst they are watching the video. This work can then be self-assessed using the mark scheme provided. Next, is a ‘Quick Check’ task where students will need to answer a set of questions using the calculation for rate of charge flow. Students will need to show their working for each of these questions, the answers are provided on the PowerPoint presentation so students can check their work against the mark scheme, making corrections where needed. Next, the lesson introduces the formula for calculating the energy transferred to components within a circuit. Students can take notes using the PowerPoint presentation and then using the formula they should work their way through another ‘Quick Check’ task. The mark scheme for this task is also included in the PowerPoint presentation for pupils to self or peer assess their work. The final part of the lesson focuses on energy transfers within a circuit. Firstly, a worked problem is shown to students before they have a go at working their way through another ‘progress check’, using knowledge of what they have learned so far this lesson. The plenary task requires pupils to write a twitter message about what they have learned in the lesson, this must include #keywords! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This resource is for the NEW AQA GCSE specification on preventing infections, it meets specification points within the 'Infection & Response' module. This resource includes a PowerPoint presentation and all the resources needed for the lesson. This lesson is part of a 12 lesson bundle for the NEW 'Infection & Response' Unit, found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by pupils considering what a communicable disease is, the differences between bacteria and viruses and the mechanisms by which these pathogens spread disease. The next part will be a brief introduction to the work of Ignaz Semmelweis, Joseph Lister and Louis Pasteur and how they have improved our knowledge of pathogens and contributed to the development of methods to stop the spread of infection. Pupils will then focus on the work of Ignaz Semmelweis by writing out some sentence starters, watching a video on his work in hospitals in order to finish the sentences off. Pupils can then assess their work using red pens. The next activity pupils will need to read some information on different disease prevention methods and will need to copy and complete the table shown on the PowerPoint slide. This could be achieved using a circus activity, whereby poster so the information are made and placed around the room for pupils to access. Finally, pupils will then consider some data on the board and use this to explain the difference between a pandemic and an epidemic. All of the resources you need for this lesson are included on the PowerPoint slide, there is also an additional resource of a newspaper article activity on Semmelweis which could be used as a homework activity.

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical calculations’ SoW, specifically designed for higher tier ‘chemistry only’ students. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a video on atom economy, pupils will answer a set of questions whilst watching the video which can be assessed using the answers provided. Pupils will then be taken through a worked example, step-by-step, to show how you are able to calculate atom economy once you know the desired product of a given reaction. Pupils will then need to use this worked example to come up with their own step-by-step checklist of tasks which need to be completed to work out the atom economy of a reaction. This can be checked against a list provided on the following PowerPoint slide. Pupils will then be given a list of questions on atom economy, they will need to show their working for each of the problems. Once the task has been completed pupils can check their work against the answers provided on the PowerPoint presentation. The next task is an exam-style question on atom economy, pupils should complete this in their books (and on their own, in silence for those higher ability classes), once complete this can be assessed against the mark scheme. The last task is for pupils to come up with five exam questions on atom economy, including a mark scheme for each question. The plenary task is for pupils to complete one of the example sentences, e.g. ‘I have understood this…’, ‘I still don’t understand…’. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction of food chains, pupils are asked to watch a video and answer a set of questions. Once complete pupils can self-assess their work. The next part of the lesson teaches students about trophic levels, firstly there is a diagram demonstrating the meaning of terms such as ‘producer’ and ‘primary consumer’ and how these correspond to trophic levels. Pupils can then have a go at matching the correct trophic level to the correct title, definition and example. Once complete pupils will self-assess their work using the mark scheme provided. Students can now have a go at constructing their own food chain or food web using a set of animals cards, once arranged they should write the order in their books and correctly level the trophic levels and whether the organism is a producer, a primary, secondary or tertiary consumer. The next part of the lesson focuses on biomass, firstly a definition is given to students and then they will need to watch a video on biomass and answer a set of questions. Once this task is complete they will be able to mark their work against the answers provided. The last task is for pupils to complete a worksheet on biomass, the answers can be written into their books and either peer r self-assessed once complete. The plenary task is for pupils to turn to the back of their books and write a detailed description of the flow of energy & changing biomass through a food chain using a selection of key words as prompts. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to adolescence and puberty, students will be given a card of information which will read as a class before students answer a set of questions. Once this task is complete, students can self-assess their work using the answers provided. Next, students should discuss with their partner the physical changes that could occur to a boy and girl during puberty, their ideas should be noted down as a mind map in their books. Their work can then be checked and corrected using the mark scheme provided. Students will now be given a set of cards describing physical changes which occur in either boys or girls or both, students will need to cut the cards out and stick them into a table in their books. The mark scheme for this task is included for students to self-assess their work. Lastly, students are introduced to the idea of sex hormones which are what cause the changes that occur in boys and girls during puberty. After this, students will be given a set of levelled questions which they should either complete at the back of their books (higher ability) or use their notes from the lesson (lower/middle ability). The plenary task requires students to summarise what they have learned this lesson in three sentences, using as many key words as possible. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with some facts and figures about the rates of smoking around the world, how many cigarettes are smoked daily and the different chemicals found in cigarette smoke and which of these are linked with disease. Students will now watch a video on the chemicals found in cigarette smoke and the damage these chemicals can do to the body, whilst watching the video students will need to answer a couple of questions. The answers to these questions are then revealed using the PowerPoint, students can self-assess their work. Students will now watch another video on smoking and the effect on your health, students will be given a set of questions that they will need to answer using the video. Once this task is complete, students will self-assess their work using the mark scheme provided. The latter part of the lesson involves an activity whereby students will be given a worksheet of questions, there will be information posters placed around the room which students will need to use to answer questions on their worksheet. The mark scheme for this task is included in the PowerPoint presentation for students to peer-assess their work with their partners. The last task is for partners to complete a ‘feedback quadrant’ of their partners work, this includes a positive comment, something they missed out which should have included and a question to test their understanding of the lesson content. The plenary activity requires students to complete a 3-3-1 reduction - 3 facts, 3 key words and then reduce this to 1 key word from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P1 ’Forces’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with a recap on the differences between contact and non-contact forces. Students are given a list of forces and a variety of pictures, they need to match the correct name of the force with the correct picture and decide whether this is a contact or non-contact force. This task can self-assessed using the mark scheme provided. Students are now introduced to the concept of a ‘reaction force’, with examples of a ball hitting the floor and a person walking along the ground. Students are shown a particle diagram to demonstrate what is happening. Next, students are introduced to the idea of an elastic cord or spring being affected by ‘extension’ and ‘tension’ forces. To assess students knowledge of what they have learned so far they will complete a progress check, a set of questions which students can answer in their books. This task can then be self-assessed using the mark scheme provided. The last part of the lesson will look at Hooke’s law, students will conduct an investigation where they will investigate Hooke’s law. This practical involves students adding 1 Newton weights to a hanger which is attached to an elastic band. Every time a new weight is added, the distance between two marked point on the elastic band is measured. Students should carry out the investigation, record their results in a the table and then plot a graph of their results. Hopefully, students will draw a linear graph and be able to identify what Hooke’s law is from their results. Students can check their work against the results provided in the PowerPoint. Finally, students are asked to complete a ‘Sentence Link-Up’ task, this is a literacy task which requires students to link three words in a summary sentence. This work can be self-assessed once it is complete using the answers provided on the PowerPoint. The plenary requires students to write three quiz questions to test their knowledge of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on the differences between elements, compounds and mixtures. Students will be given a set of diagrams and will need to decide which is which, they could write their answers down in their books or use mini white boards and complete as a class. The answers can then be revealed using the mark scheme provided and students can check their answers. Students are then given an explanation of what happens to substances during a chemical reaction, atoms rearrange and new bonds form new substances with different properties. The example of iron sulphide is used, a demonstration could also be carried out to show that iron (in a mixture of iron and sulphur) is magnetic before it is heated. Once iron and sulphur are heated to form iron sulphide, the magnetic properties are now lost. Students are now shown the basis of a word equation and the difference between reactants and products. They will then be given two word equations and will need to determine which are the reactants and which are the products, the answers will then be revealed. They will then be given four more reactions, students will need to identify the reactants and products of these reactions. Students can then self-assess their work using the mark scheme provided. Students will now try writing their own word equations using a description provided, students will need to complete a worksheet of these tasks. The answers to these questions are included in the PowerPoint for students to self-assess their work. Lastly, students will complete an investigation to observe what happens during three chemical reactions. Students will be given the practical worksheet, they can complete the investigation as a group and note down their observations from the reactions. Once the investigation is complete, students will then need to match the reactants from the reactions they carried out with the correct products. This work can then be marked and corrected using the answers provided. The plenary task requires students to write a twitter message summarising what they have learned today, students should #keywords! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P1 ’Forces’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a recap activity, students will need to sort a list of forces into two categories: contact and non-contact forces. This task can the be self-assessed using the mark scheme provided. Next, students will recap on the non-contact forces that they have already learned about: gravitational forces, magnetic forces & electrostatic forces. Students will the be asked ‘What is a Force Field’ - they will then need to ‘Think > Pair > Share’ their ideas. After a short class discussion, the answer can be revealed to students and they could take notes on this in their books. Students will carry out an investigation which helps them to visualise the force field which surrounds a magnet. Students will place small compasses at pin-point positions surrounding a bar magnet. They will need to draw an arrow to represent the direction that each compass is facing, lines can be drawn between each position which will show the overall force field of the bar magnet. This task can be self-assessed using the mark scheme provided on the PowerPoint. Next, students are told the difference between weight and mass, they are also given the calculation for the weight of an object when you are given the gravitational field strength of the planet the object is found on, plus the mass of the object. Using this calculation students will then need to complete a set of questions on weight & mass, once complete students can self-assess their work using the mark scheme provided. The last task is a ‘Progress Check’ task, whereby students will copy and compete the paragraph of information to summarise what they have learned this lesson. The plenary task requires students to write a twitter message to sum up what the students have learned in the lesson, they will need to try to #keywords. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C4 ’Acids & Alkalis’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly compare some examples of acids to alkalis, including a description of the feel and taste of some acidic and alkaline substances. Next, students will read some information about acids and alkalis on an information sheet. Using this information they will answer a set of questions in their books, this work can then be self-assessed using the mark scheme provided on the PowerPoint. Next, students are introduced to Hazard symbols - these will be important within the topics of acids and alkalis for students to determine how hazardous different chemicals might be. Students will play a game of ‘Haz-Splat’ whereby they will be given a choice of two different Hazard Symbols. They will need to come up to the board in pairs, the name of the hazard symbol is read out and students will try to ‘splat’ the correct hazard symbol before their opponent! This activity will familiarise students with the following hazards - irritant, corrosive, flammable & toxic. Next, students will be introduced to the idea of a concentrated or dilute acid, as well as the definition for concentration. Students will then work their way through a set of activities to assess their knowledge of concentration, this work can be self-assessed using the mark schemes provided. Lastly, students are shown how to calculate the concentration of a solution given the mass of solute and the volume of the solution. Students will need to use this calculation to work through a set of problems, this task can also be marked and corrected using the answers provided on the PowerPoint. The plenary task requires students to spend a minute or two talking about what they have learned during the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on the stages involved in fertilisation, students will be asked to rearrange a set of sentences into the correct order to correctly describe the process of fertilisation. Seed dispersal is now introduced, firstly students are asked to consider two questions - why the parent plant wants to disperse seeds away from itself and what are the main methods of seed dispersal that we already know of. Students can discuss the answers to these questions in pairs before feeding back into a class discussion, the answers to these questions can then be revealed. Next, students will be given a worksheet of questions and will then watch a video on various methods of seed dispersal. Students will need to answer the questions whilst watching the video, the mark scheme for this task is included in the PowerPoint for students to self-assess their work once it is complete. The last task is a progress check, whereby students will need to copy and complete a paragraph which describes the importance of seed dispersal. Students can either peer-assess or self-assess their work using the answers provided once this is complete. The plenary requires students to create three quiz questions to test their peers knowledge of what they have learned so far this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson which meets specification points within the AQA Biology Trilogy - Cells SoW. The lesson begins by pupils using posters around the room to complete a levelled worksheet on the structure and function of animal and plant cells. Pupils will then peer-assess their work, providing feedback of the grade each pupil achieved and ways to improve their work. Pupils will then complete a 'revision' task in the back of their books, they will need to stick in a sheet and match the structure to the function. Pupils can self-assess their work. The final task, an assessment task, involves pupils answering a past-paper questions. They should try and do this with their book closed to test their knowledge of what they have learnt this lesson. Pupil can then either peer-assess or self-assess their work. All resources are included, please review with any feedback :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by students discussing what they think the waste products of the body are, they can write down their ideas into their books as a mind map. As an extension pupils can consider which processes within the body actually release these waste products. The lesson then moves on to identify carbon dioxide and urea as the two major waste products of the body, pupils will then be given a levelled worksheet which they can complete by using information posters either placed around the room or placed on their desks. After pupils have completed this worksheet, they can self or peer assess their work using the mark scheme provided. The next task is an exam-style question on the work the pupils have just completed, higher ability pupils can challenge themselves by completing these questions in the back of their books and not looking at their notes. Once finished pupils can mark their work using the mark scheme provided in the PowerPoint slide. The plenary task is an anagram challenge, pupils will need to unscramble 6 words to reveal 6 key words used within the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the levels of organisation found within multicellular organisms. Students are then asked to sort the following into the correct order, according to size: cell, organ system, tissue and organ. Students are then shown the definitions for each of the following: cells, tissues and organs before being asked to complete a mind map of organ systems they alread know of. After spending a few minutes on this task, some of the example answers can be revealed for pupils to mark their work. Students are now given a list of organs and are asked to pick the organs which belong to the digestive system, respiratory system and water transport system of plants. Once this task has been completed, students can self-assess their work using the mark scheme provided. The next activity requires students to match the correct organ system name to the correct role of that organ system and then pupils need to complete a fill-in-the-blank task, the answers to both these tasks are included in the PowerPoint for students to self-assess their work. Lastly, students are given a card sort containing organs/cells/tissues - students will need to match the correct cell to the correct tissue and then organ, this can be stuck into a table in their books. This work can then be self-assessed using the mark scheme provided. Students will finally complete a ‘Team Poster Challenge’ to end the lesson. The plenary requires to spend one minute talking to the person next to them about what they have learned this lesson! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a recap of the key terms learned over the last few lessons on the topics of the skeleton and joints, students need to match the structure to the correct function. This work can then be self-assessed using the answers provided. Next, students will need to discuss the body muscle groups they already know of with their partner and then create a mind map of their ideas in their books. Students can then check their work against the answers revealed on the PowerPoint. The next activity requires students to correctly label the diagram of the human body with the muscle groups and then identify the function of each muscle group from a list provided. The mark scheme for this task is included for students to mark and correct their work. The next part of the lesson focuses on the antagonistic pairs of muscle. Students are shown a diagram of how biceps and triceps work together to either move the forearm upwards to downwards. After viewing the diagram and the explanation, students are asked to complete a fill-in-the-blank task to summarise this process. Their answers can be self-assessed using the PowerPoint presentation. Lastly, students will complete a progress check in their books - this is a set of questions based upon what they have learned this lesson. This task can be self or peer assessed using the mark scheme provided. The plenary task requires students to write three quiz questions to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the menstrual cycle and the definition of a period. This leads into a video on the menstrual cycle, students will be given a worksheet of questions which they will need to answer whilst watching the video. This work can be self-assessed using the answers provided on the PowerPoint. Next, students need to understand what is happening on different days of the menstrual cycle. They will watch another video, using this they need to outline the events which occur on Day 1, Day 14, Days 7-28 of the menstrual cycle. Once complete, students can mark and correct their work using the mark scheme provided. The next part of the lesson focuses on contraception, firstly students will be given a card of information about contraception - condoms and the contraceptive pill. Students will need to read the information and answer a set of questions, this work can be assessed using the mark scheme provided once complete. The last task is an assessment task, to check students understanding of key terms learned over the last few lessons on reproduction. Students will need to match the correct term to the correct definition, this work can assessed using the answers provided. The plenary task requires students to write a Whatsapp message to their friend, explaining what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.2 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with two images, both of ecosystems, students are then asked to discuss their ideas of what the definition of an ecosystem could be. The answer is then revealed so students can check their answers and correct if necessary. Students are now given a list of key words, whilst watching a video on ecology students should try to write a definition for each of these key words. This task can be self-assessed using the mark scheme provided once complete. Next, students are shown images of three different species of woodpecker - Green Woodpecker, Greater Spotted Woodpecker and the Lesser Spotted Woodpecker. Students can each be given a woodpecker name, they then need to come up with a survival strategy - how will they survive in the same habitat as each other? The ideas from the classroom can be noted down on the board for everyone to see. The PowerPoint can then reveal that each of the woodpeckers feeds in a different part of the woodland ecosystem. This leads into the definition of an ecological niche - as a particular place or role that an organism has within the ecosystem. The next activity requires students to watch a video on ecological niches of organisms living in a watering hole ecosystem, students will need to note down the niches they observe whilst watching the video. This task can then be marked and corrected using the answers provided on the PowerPoint once it is complete. The final activity requires students to complete a paragraph by filling in the blanks, in order to summarise what was learned this lesson. The mark scheme for this task is included so students can self-assess their work. The plenary activity requires students to complete one of the sentence starters included to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

his lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to igneous rocks, firstly looking at the way in which these types of rocks form and then looking at some of the physical properties. Students will now complete an each one teach one task, students will need be given some information about how rocks cool to form different types of rocks. Students will need to learn the information, teach each other and then complete the summary table. This task can then be self-assessed using the mark scheme provided. Students will now watch a video on metamorphic rocks, students will need to answer the questions and when complete can self-assess the work using the mark scheme provided. Lastly, students will complete a ‘copy and correct’ task, students will need to copy out the paragraph on the formation of igneous and metamorphic rocks and will need to correct any incorrect information. This work can also be self or peer assessed using the mark scheme provided. The plenary task requires students to write a list of key words that they have learned from the lesson today. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)