If you want some targeted revision structure and pupil resources, then this resource may help. A set of exam question packs and past paper analysis to aid year 11 revision for foundation and higher. Each pack is roughly two hours of exam questions and includes all markschemes and examiner reports. (Two documents per tier. One just questions and the other questions, markscheme and examineers report. How is it different from other resources? They are themed around the specification points that HAVE NOT APPEARED in the last two years (or very infrequently). This works on the basis that spec codes roughly fall on a three-year cycle with AQA exams and therefore could likely appear in this year’s exam papers. Therefore each question pack contains two full exam questions for each spec point not assessed in the last two years and one full exam question, in rank order, for those assessed infrequently. It also includes the full analysis of spec points for both tiers over both years and filterable spec lists that could enable some structure to the lesson content covered as revision. Hopefully this will lead to a more productive approach, in terms of revision topics and time management, for both pupils and teachers. How does it work? (Finer detail) It highlights spec codes that HAVE NOT appeared in the last two years of exams or have a low relative frequency, leading to a very high probability of most of them appearing in the summer exams. This tool has analysed both papers for both years and completed a frequency count of each spec code. This summarises into a combined table to prepare for the summer exams. It highlights spec codes that have not been assessed by showing as green. It colours through a spectrum of green to red, of other specs which have been assessed, but infrequently. It shows this by a simple frequency count and relative frequency. The relative analysis tool shows how common it has appeared relative to the number of spec points. A low frequency could still have a high relative frequency if there aren’t that many spec point in that section, showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups. Each analysis is shown graphically leading to easy displays for pupils to review key areas and target their focus. On the following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then led to a checklist revision list for both F and H papers and a ranking order of likely topics to appear in the summer papers starting with units where a spec has not been assessed and then leading into those with low relative frequencies.

Want to quickly and easily review a chapter of the AQA Physics specification? Want to be able to lead pupils to a targeted revision list to enable them to close their gaps? This revision resource consists of a range of questions across the specific specification points. There are a minimum of two questions per spec code. The specification document has been closely used to guarantee the correct use of terminology and phrasing. This leads to pupils then self-marking after each sub topic. This will consist of them marking and noting the identified spec code in a WWW or EBI list. Once the quiz is completed they will then follow the instructions to create their own personalised review of the full quiz and self-generate their personalised revision list by specification name using the supplied list. This activity is 1-2 depending on the depth of revision time you allow the pupils though these tasks can be class or homework. Lesson plan included.

Want to quickly and easily review a chapter of the AQA Combined Science Trilogy specification? Want to be able to lead pupils to a targeted revision list to enable them to close their gaps? This revision resource consists of a range of questions across the specific specification points. There are a minimum of two questions per spec code. The specification document has been closely used to guarantee the correct use of terminology and phrasing. This leads to pupils then self-marking after each sub topic. This will consist of them marking and noting the identified spec code in a WWW or EBI list. Once the quiz is completed they will then follow the instructions to create their own personalised review of the full quiz and self-generate their personalised revision list by specification name using the supplied list. This activity is 1-2 depending on the depth of revision time you allow the pupils though these tasks can be class or homework. Lesson plan included.

All spec codes must be examined through a three-year period with AQA exams. This is a spec code frequency analysis of the 2018 and 2019 exams for both foundation and higher exam papers leading to very specific lesson focus and pupil revision. It highlights spec codes that HAVE NOT appeared in the last two years of exams or have a low relative frequency, leading to a very high probability of most of them appearing in summer 2020. This tool has analysed 2018 and 2019 foundation and higher exam papers and completed a frequency count of each spec code. This summarises into a combined table to prepare for the 2020 exams. It highlights spec codes that have not been assessed by showing as green. It colours through a spectrum of green to red, of other specs which have been assessed, but infrequently. It shows this by a simple count and relative frequency to the number of spec codes. The relative analysis tool shows how common it has appeared relative to the number of spec points. A low spec count could still have a high relative count showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups. Each analysis is shown graphically leading to easy displays for pupils to review key areas and target their focus. On the following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then lead to a checklist revision list for both F and H papers and a ranking order of likely topics to appear in the 2020 papers starting with units where a spec has not been assessed and then leading into those with low relative frequencies. Exam questions have been made into F and H assessment/revision document from AQA past papers and has been made specifically themed on these areas to help support and lead revision up to the summer exams. All markschemes and examiner reports are included. Hopefully this will lead to a more productive approach, in terms of revision topics and time management, for both pupils and teachers.

Want to quickly and easily review a chapter of the AQA Combined Science Trilogy specification? Want to be able to lead pupils to a targeted revision list to enable them to close their gaps? This revision resource consists of a range of questions across the specific specification points. There are a minimum of two questions per spec code. The specification document has been closely used to guarantee the correct use of terminology and phrasing. This leads to pupils then self-marking after each sub topic. This will consist of them marking and noting the identified spec code in a WWW or EBI list. Once the quiz is completed they will then follow the instructions to create their own personalised review of the full quiz and self-generate their personalised revision list by specification name using the supplied list. This activity is 1-2 depending on the depth of revision time you allow the pupils though these tasks can be class or homework. Lesson plan included.

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 6.1.3.1 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well

Want to quickly and easily review a chapter of the AQA Combined Science Trilogy specification? Want to be able to lead pupils to a targeted revision list to enable them to close their gaps? This revision resource consists of a range of questions across the specific specification points. There are a minimum of two questions per spec code. The specification document has been closely used to guarantee the correct use of terminology and phrasing. This leads to pupils then self-marking after each sub topic. This will consist of them marking and noting the identified spec code in a WWW or EBI list. Once the quiz is completed they will then follow the instructions to create their own personalised review of the full quiz and self-generate their personalised revision list by specification name using the supplied list. This activity is 1-2 depending on the depth of revision time you allow the pupils though these tasks can be class or homework. Lesson plan included.

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.4.2.1-5.4.2.5 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well

Want to find a question on a specific topic for 2017 revision? Want to make an exam paper on a range of topics? Want to easily generate revision booklets? Don’t want to waste your time searching for those questions? Then this tool will help. This document consists of a full spec list for B1 and a list of exam questions for B1 by spec code. This includes all F and H paper over the years 2016-2014. It is a filterable and editable spreadsheet, listing in spec order, all the exam questions over the last three years. Simply filter by the exact required spec code. This can also be done to a range of detail as the spec codes have been split across four columns to be able to filter by a whole topic in a simpler way. It will then tell you the tier, year and exact question in a list. This list could then aid you to quickly build a resource or even give straight to pupils to generate very targeted homework/revision task based on your own gap analysis.

A set of resources mapping to spec codes from the new AQA KS3 Science specification. 3.4.3-3.4.4. Covering 6-7 lessons. A sequence of lessons covering all areas of the specification. Lesson PowerPoint’s of theory and differentiated tasks following an all, most and some principle. Mark schemes included to aid pupil self assessment. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well. At the end is a multiple choice assessment which can then be peer marked with a review by the teacher.

A set of resources mapping to spec codes from the new AQA KS3 Science specification. 3.4.1-3.4.2. Covering 11-12 lessons. A sequence of lessons covering all areas of the specification. Lesson PowerPoint’s of theory and differentiated tasks following an all, most and some principle. Mark schemes included to aid pupil self assessment. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well. At the end is a multiple choice assessment which can then be peer marked with a review by the teacher.

A set of resources mapping to spec codes from the new AQA KS3 Science specification. 3.9.3-3.9.4. Covering 10-11 lessons. A sequence of lessons covering all areas of the specification. Lesson PowerPoint’s of theory and differentiated tasks following an all, most and some principle. Mark schemes included to aid pupil self assessment. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well. At the end is a multiple choice assessment which can then be peer marked with a review by the teacher.

A set of resources mapping to spec codes from the new AQA KS3 Science specification. 3.9.1-3.9.2. Covering 8-10 lessons. A sequence of lessons covering all areas of the specification. Lesson PowerPoint’s of theory and differentiated tasks following an all, most and some principle. Mark schemes included to aid pupil self assessment. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well. At the end is a multiple choice assessment which can then be peer marked with a review by the teacher.

A set of resources mapping to spec codes from the new AQA KS3 Science specification. 3.1.1-3.1.2. Covering 8-9 lessons. A sequence of lessons covering all areas of the specification. Lesson PowerPoint’s of theory and differentiated tasks following an all, most and some principle. Mark schemes included to aid pupil self assessment. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well. At the end is an multiple choice assessment which can then be peer marked with a review by the teacher.

A set of resources mapping to spec codes from the new AQA KS3 Science specification. 3.1.3-3.1.4. Covering 7-8 lessons. A sequence of lessons covering all areas of the specification. Lesson PowerPoint’s of theory and differentiated tasks following an all, most and some principle. Mark schemes included to aid pupil self assessment. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well. At the end is a multiple choice assessment which can then be peer marked with a review by the teacher.