This is a highly engaging, detailed and fully-resourced revision lesson which has been designed to test the students on their knowledge and understanding of topic 6 (Radioactivity) of the Pearson Edexcel GCSE Physics specification. The PowerPoint and accompanying resources contain a wide range of resources which include exam-style questions with fully-explained answers, differentiated tasks and quick quiz competitions. The students will be motivated by the range of tasks whilst crucially recognising those areas of the specification which require some extra time before the exams The following specification points are covered in this lesson: Describe the structure of atom and recall the typical size Recall the relative masses and charges of the subatomic particles and use the number of protons and electrons to explain why atoms are neutral Describe the structure of the nuclei of an isotope Explain what is meant by background radiation and recall sources Describe methods for measuring and detecting radioactivity Describe the process of beta minus and beta plus decay Write and balance nuclear decay equations Explain the effects on the proton and nucleon number as a result of decay Recall that the unit of radioactivity is Bq Use the concept of half-life to carry out calculations Describe the use of isotopes in PET scanners Describe the differences between nuclear fission and fusion Explain how the fission of U-235 produces two daughter nuclei, two or three neutrons and releases energy Describe the advantages and disadvantages of nuclear energy Explain why nuclear fusion cannot happen at low temperatures and pressures It is estimated that it will take in excess of 2 hours of GCSE teaching to cover the detail of this lesson and it can be used for effective revision at the end of the topic or in the lead up to mock or terminal exams.

This fully-resourced revision lesson contains a wide range of activities that will challenge the students on their knowledge and understanding of the content detailed in the CORE and SUPPLEMENT sections of topic P2 (Work, energy and power) of the CIE IGCSE Combined Science specification. These activities include exam style questions which will allow the students to assess their progress against the clearly explained answers. There is also a quiz that runs throughout the course of the lesson and this has been designed to maintain engagement and motivation. The following specification points have been covered in this lesson: Recall and use the equation to calculate work done Demonstrate an understanding that work done = energy transferred Understand that an object may have energy due to its motion or position Recall and use the equations to calculate kinetic and gravitational potential energy Recognise the ways that energy is transferred during events and processes Apply the conservation of energy Recall and use the equation to calculate power Distinguish between renewable and non-renewable sources of energy Describe how electricity is obtained from the tides, hydroelectric power and nuclear fission One of the main tasks of the lesson, which challenges the students to apply the law of the conservation of energy, has been differentiated so that differing abilities can access the work

This fully-resourced revision lesson has been written to cover the major details of the electricity and circuits topic that can be assessed in the GCSE Physics and Combined Science (HT) exams. The engaging PowerPoint and accompanying resources contain a wide range of activities which include exam-style questions with clearly explained answers, differentiated tasks and quiz competitions to allow students to assess their understanding and to ultimately recognise those areas which need further consideration. The following points are covered in this revision lesson: The electrical symbols that represent the electrical components Describe the differences between series and parallel circuits Recall that a voltmeter is connected in parallel One volt is equal to one joule per coulomb Recall and use the equations that calculate energy transferred, charge, potential difference, power and electrical power Recall that an ammeter is connected in series Calculate the currents, potential differences and resistances in series and parallel circuits Explain how current varies with potential difference in resistors Know the functions of the wires in a plug and the safety features The main task of the lesson, which challenges the students to calculate the currents, potential differences and resistances in series and parallel circuits, is differentiated to allow students of differing abilities to access the work

This revision lesson has been designed to challenge the students on their use of a range of mathematical skills that could be assessed on the six OCR Gateway A GCSE Combined Science papers. The mathematical element of the GCSE Combined Science course has increased significantly since the specification change and therefore success in those questions which involve the use of maths can prove to be the difference between one grade and another or possibly even more. The engaging PowerPoint and accompanying resources contain a wide range of activities that include exam-style questions with displayed mark schemes and explanations so that students can assess their progress. Other activities include differentiated tasks, class discussion points and quick quiz competitions such as “It doesn’t HURT to CONVERT”, “YOU DO THE MATH” and “FILL THE VOID”. The following mathematical skills (in a scientific context) are covered in this lesson: The use of Avogadro’s constant Rearranging the formula of an equation Calculating the amount in moles using mass and relative formula mass Calculating the relative formula mass for formulae with brackets Using the Periodic Table to calculate the number of sub-atomic particles in atoms Changes to electrons in ions Balancing chemical symbol equations Empirical formula Converting between units Calculating concentration in grams per dm cubed and volumes of solutions Calculating size using the magnification equation Using the mean to estimate the population of a sessile species Calculating percentages to prove the importance of biodiversity Calculating percentage change The BMI equation Calculating the acceleration from a velocity-time graph Recalling and applying the Physics equations Understanding prefixes that determine size Leaving answers to significant figures and using standard form Helpful hints and step-by-step guides are used throughout the lesson to support the students and some of the worksheets are differentiated two ways to provide extra assistance. Due to the detail of this lesson, it is estimated that it will take in excess of 3 hours of GCSE teaching time to cover the tasks and for this reason it can be used over a number of lessons as well as during different times of the year for revision

This is a fully-resourced lesson which uses exam-style questions, quiz competitions, quick tasks and discussion points to challenge students on their understanding of topics P5 - P7, that will assessed on PAPER 6. It has been specifically designed for students on the AQA GCSE Combined Science course who will be taking the FOUNDATION TIER examinations but is also suitable for students taking the higher tier who need to ensure that the fundamentals are known and understood. The lesson has been written to cover as many specification points as possible but the following sub-topics have been given particular attention: Factors affecting the thinking, braking and stopping distance The 7 recall and apply equations tested in PAPER 6 Using velocity-time graphs to calculate accelerations The motions represented by the different lines on a velocity-time graph Resultant forces Speed and velocity as scalar and vector quantities Converting between units Sound as an example of a longitudinal wave The EM spectrum The meaning of amplitude, wavelength, frequency and period Contact and non-contact forces Attraction and repulsion in magnets Magnetic fields The extension of a spring In order to maintain challenge whilst ensuring that all abilities can access the questions, the majority of the tasks have been differentiated and students can ask for extra support when they are unable to begin a question. Step-by-step guides have also been written into the lesson to walk students through some of the more difficult concepts such as calculating acceleration and the mathematical elements Due to the extensiveness of this revision lesson, it is estimated that it will take in excess of 2/3 teaching hours to complete the tasks and therefore this can be used at different points throughout the course as well as acting as a final revision before the PAPER 6 exam.

At the end of topic 3, or in the lead up to mocks or final A-level exams, students can use this lesson to assess their understanding of topic 3 content. The lesson consists of 20 multiple-choice questions, which have been written to challenge the students on the detail of their knowledge, as well as a PowerPoint which contains the answers, explanations and key points related to the specification. The PowerPoint also contains other topic 3 knowledge checks on content which isn’t directly questioned in the multiple-choice assessment, and prior knowledge checks to encourage the students to recognise the links to topic 1 and 2. The following topics are challenged by the multiple-choice questions: Surface area to volume ratio Gas exchange (in animals and plants) Digestion and absorption Mass transport in animals Mass transport in plants

This revision lesson provides students with the opportunity to assess their understanding of nucleic acids and protein synthesis (topic 6). The lesson includes a multiple-choice assessment of 10 questions and a PowerPoint containing the answers, where each answer slide shows the exact specification code to enable students to note the areas which may require extra attention. The PowerPoint also contains additional questions to challenge content from topic 6 of the CIE A-level biology specification (2025 - 2027 update) that isn’t directly covered by the 10 questions, and prior knowledge checks to encourage students to make links to content from topics 1 - 5. This lesson has been designed to be used at the end of topic 6, and in the build up to mocks and the final A-level assessments.

This lesson challenges the students on their knowledge of the content of module 2.1.2 using a multiple-choice assessment of 15 questions. This sub-module of the OCR A-level biology A specification concerns biological molecules and understanding of this content is fundamental to the understanding of a lot of the topics that follow. The answers to the 15 questions are embedded into the accompanying PowerPoint, which also has KEY POINTS, and other knowledge checks to challenge the content that wasn’t directly assessed by the 15 questions. This lesson has been designed to be used for revision purposes when students reach the end of module 2.1.2 or in the lead up to mock examinations or even final A-level examinations.

An engaging lesson presentation (57 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within module P6 (Global challenges) of the OCR Gateway A GCSE Combined Science specification. The topics that are tested within the lesson include: Everyday motion Reaction time and thinking distance Braking distance and stopping distance Energy sources The National Grid Mains electricity Students will be engaged through the numerous activities including quiz rounds like “Can you go the DISTANCE” whilst crucially being able to recognise those areas which need further attention

An engaging lesson presentation (42 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within TOPIC 6 (The rate and extent of chemical change) of the AQA GCSE Chemistry specification (specification point C4.6) The topics that are tested within the lesson include: Calculating rates of reactions Factors that affect the rate of a reaction Collision theory Reversible reactions Equilibrium Changing the equilibrium position Students will be engaged through the numerous activities including quiz rounds like “Don’t get iRATE” and “Under PRESSURE” whilst crucially being able to recognise those areas which need further attention

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Physics Topic 1 (Key concepts in Physics) of the Edexcel GCSE Combined Science specification. Topic 1 is common to both Paper 5 and 6 and therefore will be tested in both of these exams. The sub-topics and specification points that are tested within the lesson include: Recall and use the SI units for the physical quantities Recall and use multiples and sub-multiples of units, including giga, mega, kilo, centi, milli, micro and nano Be able to convert between different units, including hours to seconds Use significant figures and standard form where appropriate Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quiz tasks and quiz competitions to enable students to assess their understanding of the content within topic 6 (Chemical energetics) of the Cambridge IGCSE Chemistry (0620) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: CORE Describe the meaning of exothermic and endothermic reactions Interpret energy level diagrams showing exothermic and endothermic reactions Describe the release of heat energy by burning fuels State the use of hydrogen as a fuel SUPPLEMENT Describe bond breaking as an endothermic process and bond forming as an exothermic process Draw and label energy level diagrams for exothermic and endothermic reactions using data provided Calculate the energy of a reaction using bond energies Describe the use of hydrogen as a fuel reacting with oxygen to generate electricity in a fuel cell. The students will thoroughly enjoy the range of activities, which include quiz competitions such as “E NUMBERS” where they have to recognise the differences between endothermic and exothermic reactions whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quiz tasks and quiz competitions to enable students to assess their understanding of the content within topic 5 (Electricity and Chemistry) of the Cambridge IGCSE Chemistry (0620) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: CORE Define electrolysis as the breakdown of an ionic compound, molten or in aqueous solution, by the passage of electricity Describe the electrode products and the observations made during the electrolysis of a range of electrolytes State the general principle that metals or hydrogen are formed at the negative electrode (cathode), and that non-metals (other than hydrogen) are formed at the positive electrode (anode) Predict the products of the electrolysis of a specified binary compound in the molten state Describe the reasons for the use of copper and (steel-cored) aluminium in cables, SUPPLEMENT Relate the products of electrolysis to the electrolyte and electrodes used Describe electrolysis in terms of the ions present and reactions at the electrodes in the examples given Predict the products of electrolysis of a specified halide in dilute or concentrated aqueous solution Construct ionic half-equations for reactions at the cathode Describe, in outline, the manufacture of aluminium from pure aluminium oxide in molten cryolite and chlorine, hydrogen and sodium hydroxide from concentrated aqueous sodium chloride The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Have you got the SOLUTION” where they have to compete to be the 1st to name the products at the electrodes whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging and fully resourced REVISION lesson which uses a range of exam questions, understanding checks, quick differentiated tasks and quiz competitions to enable students to assess their understanding of the content within topic 4 (Atomic structure) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Students should know that atoms are very small, having a radius of about 1 × 10-10 metres. Students should know that the basic structure of an atom is a positively charged nucleus composed of both protons and neutrons surrounded by negatively charged electrons Students should be able to use the atomic number and mass number and understand how these differ in isotopes Students should know the key stages in the development of the model of the atom and the main pieces of evidence that were found Students should know that some atomic nuclei are unstable and that the nucleus gives out radiation as it changes to become more stable. Students should know the penetrating and ionising power and range in air of the alpha particles, beta particles and gamma rays Students should be able to represent decay with equations and be able to describe the effect on the atomic and mass number Students should be able to determine the half-life of a radioactive isotope from given information. Students should be able to describe nuclear fission and fusion The students will thoroughly enjoy the range of activities, which include quiz competitions such as “It’s as easy as ABG” where they have to compete to be the 1st to work out the word formed from the letters of the different types of radiation whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging REVISION lesson which is fully-resourced and uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 2 (Electricity) of the Pearson Edexcel IGCSE Physics 9-1 specification (4PH1) for first teaching in 2017 and first assessment in June 2019. The specification points that are covered and challenged in this revision lesson include: Use the following units: ampere (A), coulomb ©, joule (J), ohm (Ω), second (s), volt (V) and watt (W) understand how the use of fuses protects the device or user in a range of domestic appliances Know and use the relationship between power, current and voltage Know the difference between mains electricity being alternating current (a.c.) and direct current (d.c.) being supplied by a cell or battery Understand how the current in a series circuit depends on the applied voltage and the number and nature of other components Know and use the relationship between voltage, current and resistance Know that current is the rate of flow of charge Know that electric current in solid metallic conductors is a flow of negatively charged electrons Know that the voltage across two components connected in parallel is the same Calculate the currents, voltages and resistances of two resistive components connected in a series circuit Explain how positive and negative electrostatic charges are produced on materials by the loss and gain of electrons Know that there are forces of attraction between unlike charges and forces of repulsion between like charges The students will thoroughly enjoy the range of activities, which include quiz competitions such as “COMPLETE ME” where they have to compete to be the 1st to recognise an electrical key term to complete a passage whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual International GCSE exams