Lesson based on Edexcell ‘keeping warm’, covering conduction convection, radiation and insulation. Can be used for other SOW. Everything you need for the lesson included; simple practical exercise (based on insulators), timers to promote pace, animations for Q/A during review of answers after each learning check point. Plenary based on self reflection against lesson LO’s.

A complete, differentiated lesson based on the Activate 2 (P2.5 ) SOW but can be used for others. This lesson covers the key aspects of infrared radiation, thermal imaging and the use of foil blankets etc. Student understanding is checked with a differentiated question grid challenge (answers included) prior to a simple practical. For the practical hot water bottles with different covers, different coloured cups ice or heat packs can be used. Students will use a thermometer to record the temperature of each object and then judge how much infrared radiation is given off using the back of their hands. An alternative simple prac is included where students monitor the temperature of black and silver cans containing hot water. This is followed by 'stretch questions' associated with the practical and a plenary designed to encourage self reflection within students in regards to their progress against the learning objectives.

A lesson based on the Activate 2 (P1.2) SOW but can be used for others. The lesson involves an introduction to circuit symbols, current, measuring current and cells/batteries. Students then model current in a circuit using rope. There is then a simple practical where students measure current within simple circuits; battery packs, connection leads, ammeters, bulbs, motors, buzzers and switches are required. This is followed by a differentiated question grid challenge where students answer as many questions as they can within 10 minutes. The plenary is based on student reflection against the learning objectives. Students can be asked to read out their answers during the plenary, and this can be 'pop corned' on by throwing around a soft toy.

This lesson is based on the Activate 2 (P1.7) SOW but can be used for others. The lesson includes the making of electromagnets, increasing the strength of electromagnets and differentiates between permanent and electromagnets. A practical demonstration and a fun think pair and share session are included to maintain student focus. Students attempt a focus mark question based on the content of the lesson and peer assess - this can be used for focus marking. The plenary involves students reflecting upon their progress against the learning objectives, and how they can improve. No additional worksheets required, answers incorporated into the slides for written activities.

A full lesson based on the Activate 2 (P1.6) SOW but can be used for others. The lesson covers poles, attraction and repulsion and magnetic fields. A practical activity is included where students draw magnetic field lines making use of a bar magnet and a compass. The students then study the earths magnetic field prior to attempting summary questions based on the content of the lesson (answers incorporated). Video and think pair share sessions are included to maintain student focus. The plenary is consists of students writing a reflective paragraph based on their progress against the learning objectives - prompts included on slides.

Full differentiated lesson based on colour (activate SOW). Includes timers and animations to promote pace and Q/A during peer/self correction or marking. Whiteboard AFL activity included as well as fun 'car race' plenary.

A complete lesson based on the topic of loudness and pitch. The lesson is based on the Activate 1 (2.3) SOW but can be used for others. All resources/activities are incorporated into the slides, no additional worksheets required. Planner cards (red, green and yellow) are needed for AFL at one of the learning checkpoints, and an oscilloscope would be good for the demonstration - a video is included if this is not possible. The lesson teaches the relationship between loudness and amplitude, and frequency and pitch prior to class wide AFL. The audible range is discussed and students are then redirected to the question posed within the starter. Students must then design an audible deterrent systems to protect certain animals (such as a goldfish) from predators making use of a table which gives the audible range of different species. The plenary is based on student reflection on their progress against the learning objectives, a soft toy can be thrown between students to elect who reads out their answer.

This lesson is based on the Activate 2 (P2.2) SOW but can be used for others. The lesson covers the law of conservation of energy, different energy stores, energy transfer and dissipation. Learning is assessed at 3 stages using think pair and share, an energy store match up, and a 4 mark question to answer. Students are scaffolded up to each task, and answers are included to allow self/peer assessment. The practical activity involves 6 small experiments that the students must visit, observe energy transfers and explain their observations within a table. Extension questions are included for those who finish early, again the answers are included within the slides. The plenary involves students reflecting upon their progress against the learning objectives.

Full lesson with everything you need. Based on activate SOW and pitched to a year 7 class. Lesson is differentiated to support both more and less able. Timings included to promote pace and animations for peer or self marking/correction.

A complete lesson based on the Activate 2 (P1.5) SOW but can be used for others. The lesson includes an introduction on how to calculate it making use of the equation triangle. Students then attempt calculations and can 'stretch' to rearrange the equation to calculate p.d and current. Conductors and insulators are then introduced ahead of a practical exercise where students calculate resistance from a series of p.d. and current measurements. Power packs, variable resistors, ammeters and voltmeters. The plenary is based on students reflecting on their progress against the learning objectives.

A differentiated lesson based on the Activate 2 (P1.3) SOW but can be used for others. The lesson covers the meaning of potential difference and how to measure it, a brief mention of the key words 'series' and 'parallel' and their meaning, and a brief introduction to p.d. ratings on batteries. There is then class wide AFL with the use of planner (red, green and yellow) cards covering the information above. Students then progress to a simple practical activity where they measure p.d. across different components; battery packs, connection leads, voltmeters, bulbs and switches are required. A 'stretch' question sheet is included if students progress ahead of time, the answers for this are incorporated into the slides. The plenary is based on student reflection against the learning objectives, answers can be read out and 'pop corned' between peers.

A full lesson based on the Activate 2 (P3.1) SOW but can be used for others. This lesson covers the units of speed, how to calculate speed, distance and time. Student understanding is checked with a simple calculation table and answers are peer/self assessed. The lesson then moves onto averages speed vs. instantaneous speed and relative motion. A differentiated question grid challenge is then used to apply learning and facilitate AFL for peer/self marking. The practical activity involves students calculating the speed of a toy car down a ramp, which can be divided into 5 sections to facilitate the calculation of instantaneous speed within each section. The plenary is based on the students reflecting upon their progress against the learning objectives.

A full 1h lesson covering the topic of waves. The lesson is based on the Activate 1 (P2.1) SOW but can be used for others. All activities are incorporated into the slides with no additional worksheets required. A slinky is required for a brief demonstration alongside white boards for AFL. Students are asked to perform a Mexican wave during the early stages of the lesson to visualise how energy (but not matter) is transferred within a wave. The plenary is based in students reflecting upon their progress against the learning objectives, this can be made fun by throwing a soft toy between students and asking them to read out their answers.

A full lesson based on the activate 1 (P2.5) SOW but can be used for others. The lesson covers echoes, distance and choes, reducing echoes, ultrasound and its uses. A simple DART activity is used for early AFL. Students then take part in a literacy exercise to consolidate and expand on the content of the lesson. The plenary is based on students reflecting upon their progress against the learning objectives.

A complete lesson on the topic of sound and energy transfer. The lesson is based on the Activate 1 (P2.2) SOW but can be used for others. All content is incorporated into the slides, no additional worksheets needed. The lesson is based on students drawing their own conclusions from given information or data. An activity is included where students determine where in the classroom sound would travel fastest, based on the speed of sound through different materials. A think pair and share session around thunder and lightening is used to compare the speed of light and sound. The main written exercise is a differentiated 'beat the grid challenge' where students answer as many questions as they can in 10 minutes. The plenary is based upon reflection against the learning objectives, students can be instructed to read out tier answers and popcorn this on to a peer.

A complete lesson on energy dissipation tailored towards the AQA SOW. Covers useful energy, wasted energy and friction with a learning checkpoints based on a past exam question. The ‘spreading out’ (dissipation) of energy is then covered ahead of a simple practical activity where students use pulleys to investigate friction and its effect upon work done. Follow up questions and answers included to facilitate peer or self marking after practical. Originally this lesson was planned fora high ability year 10 group, but has been used with year 9 group with no problems.

Change in energy stores lesson which also covers conservation of energy , energy efficiency and flow diagrams. Based on AQA SOW, differentiated with everything you need. Timers are used to promote pace and answers are included through animation to facilitate self or peer correction.

A full AQA physics revision lesson specifically tailored towards the P1 checkpoint (conservation and dissipation of energy). This lesson was used for a low ability group and is based on the foundation P1 test paper. Includes whiteboard activity, think pair and share, work done, GPE and power calculations. Timers are included to promote pace and PowerPoint animations are used to facilitate Q/A during review of each learning checkpoint.

A complete lesson for the topic of alternating current, based on AQA P5.1 but can be used for other schemes of work. The lesson is differentiated with stretch activities for more able and support sheets for less able. A practical exercise is included where students use oscilloscopes to investigate a.c. currents. The lesson includes timers to promote pace and power-point animations to facilitate Q/A during the review of each learning checkpoint. Plenary is based on students reflection against the learning objectives.

Tailored towards activate SOW but can be used for others. Includes a short simple, practical activity using light boxes. Lesson is differentiated to support more and less able. Use of timings and powerpoint animations promotes pace and Q/A during self or peer mediated questioning. Class wide AFL supported through simple red, green or yellow card activity.