This fully-resourced lesson explains how gene mutations can occur by substitution, deletion and insertion and explores how these base pair changes can affect the primary structure of the polypeptide and therefore the phenotype. The engaging and detailed PowerPoint and accompanying resources have been designed to cover point 16.2 (e) of the CIE International A-level Biology specification which states that students should understand how these mutations occur and can affect the phenotype. In order to understand how a change in the base sequence can affect the order of the amino acids, students must be confident in their understanding and application of protein synthesis which was taught in topic 6. Therefore, the start of the lesson focuses on transcription and translation and students are guided through the use of the codon table to identify amino acids. Moving forwards, a quick quiz competition is used to introduce the names of three types of gene mutation whilst challenging the students to recognise terms which are associated with the genetic code and were met in the previous lesson. The main focus of the lesson is base substitutions and how these mutations may or may not cause a change to the amino acid sequence. The students are challenged to use their knowledge of the degenerate nature of the genetic code to explain how a silent mutation can result. The rest of the lesson looks at base deletions and base insertions and students are introduced to the idea of a frameshift mutation. One particular task challenges the students to evaluate the statement that base deletions have a bigger impact on primary structure than base substitutions. This is a differentiated task and they have to compare the fact that the reading frame is shifted by a deletion against the change in a single base by a substitution

This engaging and fully-resourced lesson looks at how genetic drift can arise after a genetic bottleneck or as a result of the Founder effect. The detailed PowerPoint and accompanying resources have been designed to cover point 17.2 © of the CIE International A-level Biology specification which states that students should be able to explain how the Founder effect and genetic drift may affect allele frequencies in populations. A wide range of examples are used to show the students how a population that descends from a small number of parents will have a reduction in genetic variation and a change in the frequency of existing alleles. Students are encouraged to discuss new information to consider key points and understanding checks in a range of forms are used to enable them to check their progress and address any misconceptions. Students are provided with three articles on Huntington’s disease in South Africa, the Caribbean lizards and the plains bison to understand how either a sharp reduction in numbers of a new population beginning from a handful of individuals results in a small gene pool. Links to related topics are made throughout the lesson to ensure that a deep understanding is gained.

This fully-resourced lesson guides students through the use of the Hardy-Weinberg equations to determine the frequency of alleles, genotypes and phenotypes in a population. Both the detailed PowerPoint and differentiated practice questions on a worksheet have been designed to cover point 17.2 (d) of the CIE International A-level Biology specification which states that students should be able to demonstrate and apply their knowledge and understanding of the use of the principle to calculate frequencies in populations. The lesson begins by looking at the two equations and ensuring that students understand the meaning of each of the terms. The recessive condition, cystic fibrosis, is used as an example so that students can start to apply their knowledge and assess whether they understand which genotypes go with which term. Moving forwards, a step-by-step guide is used to show students how to answer a question. Tips are given during the guide so that common misconceptions and mistakes are addressed immediately. The rest of the lesson gives students the opportunity to apply their knowledge to a set of 3 questions, which have been differentiated so that all abilities are able to access the work and be challenged.

This fully-resourced lesson looks at the external and internal structure of the mammalian heart and explains how the differences in the thickness of the chamber walls is related to function. The engaging and detailed PowerPoint and accompanying resources have been designed to cover points 8.2 (a) and (b) of the CIE International A-level Biology specification As this topic was covered at GCSE, the lesson has been planned to build on this prior knowledge whilst adding the key details which will enable students to provide A-level standard answers. The primary focus is the identification of the different structures of the heart but it also challenges their ability to recognise the important relationship to function. As detailed in specification point (b), time is taken to ensure that students can explain why the atrial walls are thinner than the ventricle walls and why the right ventricle has a thinner wall than the left ventricle. Opportunities are taken throughout the lesson to link this topic to the others found in topics 8.1 and 8.2 including those which have already been covered like circulatory systems as well as those which are upcoming such as the cardiac cycle. There is also an application question where students have to explain why a hole in the ventricular septum would need to be repaired if it doesn’t naturally close over time.

This fully-resourced REVISION lesson has been written to challenge the students on their knowledge of the content of topic 1 (Cell structure) of the CIE International A-level Biology specification. The PowerPoint and accompanying resources will motivate the students whilst they assess their understanding of the content and identify any areas which may require further attention. The wide range of activities have been written to cover as much of the topic as possible but the following specification points have been given particular focus: ATP is produced in mitochondria and chloroplasts and the role of ATP in cells Recognising eukaryotic cell structures and outlining their functions Calculating actual sizes from electron micrographs The structural features of a typical prokaryotic cell The key features of viruses as non-cellular structures Distinguish between resolution and magnification Quiz rounds such as “GUESS WHO of CELL STRUCTURES” and “YOU DO THE MATH” are used to test the students on the finer details of their knowledge of the structure and functions of the organelles and some key numerical facts

This detailed lesson explains how observable features at a microscopic level can be used to classify living organisms into one of the five kingdoms. The engaging PowerPoint and accompanying resources have been designed to cover point 4.2.2 © (i) of the OCR A-level Biology A specification which states that students should be able to demonstrate and apply an understanding of the features of the animalia, plantae, fungi, protoctista and prokaryotae kingdoms. This lesson begins with a knowledge recall as students have to recognise that prior to 1990, kingdom was the highest taxa in the classification hierarchy. Moving forwards, they will recall the names of the five kingdoms and immediately be challenged to split them so that the prokaryotae kingdom is left on its own. An opportunity is taken at this point to check on their prior knowledge of the structure of a bacterial cell from module 2.1.1. These prior knowledge checks are found throughout the lesson (along with current understanding checks) as students are also tested on their knowledge of the structure and function of cellulose. This is found in the section of the lesson where the main constituent of the wall can be used to distinguish between plantae, fungi and prokaryotae. Quick quiz competitions, such as YOU DO THE MATH and SAY WHAT YOU SEE are used to introduce key values and words in a fun and memorable way. The final part of the lesson looks at the protoctista kingdom and students will come to understand how these organisms tend to share a lot of animal or plant-like features. Both of the accompanying resources have been differentiated to allow students of differing abilities to access the work and this lesson has been written to tie in with the previously uploaded lesson on taxonomic hierarchy and the binomial naming system (4.2.2 a & b).

This lesson describes the classification of species into the taxonomic hierarchy and cover point 18.2 (a) of the CIE A-level Biology specification. The engaging PowerPoint and accompanying resources have been designed to show students how the domain, kingdom, phylum, class, order, family, genus and species are used in modern-day classification. The lesson begins by with a knowledge recall as students have to use the provided information about a mule to explain why a horse and donkey are considered to be members of different species. Moving forwards, students will learn that species is the lowest taxon in the modern-day classification hierarchy. The first of a number of rounds of a competition is used to engage the students whilst they learn the names of the 7 other taxa and the horse and the donkey from the earlier example are used to complete the hierarchy. Students are told that a binomial naming system is used in Biology to provide a universal name for each species and the final task of the lesson challenges them to apply their knowledge by completing a hierarchy for a modern-day human, by spotting the correct name for an unfamiliar organism

This revision lesson has been designed to challenge the students on their use of a range of mathematical skills that could be assessed on the six OCR Gateway A GCSE Combined Science papers. The mathematical element of the GCSE Combined Science course has increased significantly since the specification change and therefore success in those questions which involve the use of maths can prove to be the difference between one grade and another or possibly even more. The engaging PowerPoint and accompanying resources contain a wide range of activities that include exam-style questions with displayed mark schemes and explanations so that students can assess their progress. Other activities include differentiated tasks, class discussion points and quick quiz competitions such as “It doesn’t HURT to CONVERT”, “YOU DO THE MATH” and “FILL THE VOID”. The following mathematical skills (in a scientific context) are covered in this lesson: The use of Avogadro’s constant Rearranging the formula of an equation Calculating the amount in moles using mass and relative formula mass Calculating the relative formula mass for formulae with brackets Using the Periodic Table to calculate the number of sub-atomic particles in atoms Changes to electrons in ions Balancing chemical symbol equations Empirical formula Converting between units Calculating concentration in grams per dm cubed and volumes of solutions Calculating size using the magnification equation Using the mean to estimate the population of a sessile species Calculating percentages to prove the importance of biodiversity Calculating percentage change The BMI equation Calculating the acceleration from a velocity-time graph Recalling and applying the Physics equations Understanding prefixes that determine size Leaving answers to significant figures and using standard form Helpful hints and step-by-step guides are used throughout the lesson to support the students and some of the worksheets are differentiated two ways to provide extra assistance. Due to the detail of this lesson, it is estimated that it will take in excess of 3 hours of GCSE teaching time to cover the tasks and for this reason it can be used over a number of lessons as well as during different times of the year for revision

This detailed lesson explains how the process of transcription results in the production of messenger RNA (mRNA). Both the detailed PowerPoint and accompanying resource have been designed to specifically cover the first part of point 6.2 (d) of the CIE International A-level Biology specification. The lesson begins by challenging the students to recall that most of the nuclear DNA in eukaryotes does not code for polypeptides. This allows the promoter region and terminator region to be introduced, along with the structural gene. Through the use of an engaging quiz competition, students will learn that the strand of DNA involved in transcription is known as the template strand and the other strand is the coding strand. Links to previous lessons on DNA and RNA structure are made throughout and students are continuously challenged on their prior knowledge as well as they current understanding of the lesson topic. Moving forwards, the actual process of transcription is covered in a 7 step bullet point description where the students are asked to complete each passage using the information previously provided. An exam-style question is used to check on their understanding before the final task of the lesson looks at the journey of mRNA to the ribosome for the next stage of translation. This lesson has been written to challenge all abilities whilst ensuring that the most important details are fully explained.

This detailed lesson describes the role of the strand of mRNA, the tRNA molecules, the amino acids and the ribosome during the second stage of protein synthesis - translation. Both the PowerPoint and accompanying resources have been designed to cover the second part of point 6.2 (d) of the CIE International A-level Biology specification and ties in with the first part of this specification point which covered transcription. Translation is a topic which is often poorly understood and so this lesson has been written to enable the students to understand how to answer the different types of questions by knowing and including the key details of the structures involved. The lesson begins by challenging the students to consider why it is so important that the amino acids are assembled in the correct order during the formation of the chain. Moving forwards, a quick quiz round called “LOST IN TRANSLATION” is used to check on their prior knowledge of the mRNA strand, the tRNA molecules, the genetic code and the ribosomes. The next task involves a very detailed description of translation that has been divided into 14 statements which the students have to put into the correct order. By giving them a passage that consists of this considerable detail, they can pick out the important parts to use in the next task where they have to answer shorter questions worth between 3 and 4 marks. These types of questions are common in the assessments and by building up through the lesson, their confidence to answer this type should increase. The final two tasks of the lesson involve another quiz called “The protein synthesis game”, where the teams compete to transcribe and translate in the quickest time before using all the information from the lessons on protein synthesis to answer some questions which involve the genetic code and the mRNA codon table.

This fully-resourced lesson describes how the mechanisms of root pressure and transpiration pull move water upwards in the xylem to the leaves. The detailed PowerPoint and accompanying, differentiated resources have primarily been designed to cover the second part of point 7.2 [c] of the CIE International A-level Biology specification but also cover 7.2 [b] as the cohesion-tension theory and adhesion are described and explained. This lesson has been written to follow on from the end of the previous lesson, which finished with the description of the transport of the water and mineral ions from the endodermis to the xylem. Students are immediately challenged to use this knowledge to understand root pressure and the movement by mass flow down the pressure gradient. Moving forwards, time is taken to study the details of transpiration pull and the interaction between cohesion, tension and adhesion in capillary action is explained. Understanding is constantly checked through a range of tasks and prior knowledge checks are also written into the lesson to challenge the students to make links to previously covered topics such as the structure of the transport tissues. The final part of the lesson considers the journey of water through the leaf and ultimately out of the stomata in transpiration. A step by step guide using questions to discuss and answer as a class is used to support the students before the final task challenges them to summarise this movement through the leaf.

Monosaccharides are the monomers from which larger carbohydrates are formed and this lesson describes their structure and roles in living organisms. The detailed and engaging PowerPoint and accompanying resources have been designed to cover the first part of point 1.2 of the AQA A-level Biology specification and looks at alpha-glucose, beta-glucose, galactose, fructose, deoxyribose and ribose. The lesson begins with a made-up round of the quiz show POINTLESS, where students have to try to identify four answers to do with carbohydrates. In doing so, they will learn or recall that these molecules are made from carbon, hydrogen and oxygen, that they are a source of energy which can sometimes be rightly or wrongly associated with obesity and that the names of the three main groups is derived from the Greek word sakkharon. Using the molecular formula of glucose as a guide, students will be given the general formula for the monosaccharides and will learn that deoxyribose is an exception to the rule that the number of carbon and oxygen atoms are equal. Moving forwards, students have to study the displayed formula of glucose for two minutes without being able to note anything down before they are challenged to recreate what they saw in a test of their observational skills. At this point of the lesson, the idea of numbering the carbons is introduced so that the different glycosidic bonds can be understood in an upcoming lesson as well as the recognition of the different isomers of glucose. The difference between alpha and beta-glucose is provided and students are again challenged to draw a molecule of glucose, this time for the beta form. The remainder of the lesson focuses on the roles of the 6 monosaccharides and the final task involves a series of application questions where the students are challenged to suggest why ribose could be considered important for active transport and muscle contraction

This engaging lesson describes the relationship between the structure and properties of a phopholipid and explains the link to its role in membranes. The PowerPoint has been designed to cover the second part of point 1.3 of the AQA A-level Biology specification and includes constant references to the previous lesson on triglycerides. The role of a phospholipid in a cell membrane provides the backbone to the whole lesson. A quick quiz round called FAMILY AFFAIR, challenges the students to use their knowledge of the structure of a triglyceride to identify the shared features in a phospholipid. This then allows the differences to be introduced, such as the presence of a phosphate group in place of the third fatty acid. Moving forwards, the students will learn that the two fatty acid tails are hydrophobic whilst the phosphate head is hydrophilic which leads into a key discussion point where the class has to consider how it is possible for the phospholipids to be arranged when both the inside and outside of a cell is an aqueous solution. The outcome of the discussion is the introduction of the bilayer which is critical for the lesson in topic 2 on the fluid mosaic model. The final part of the lesson explains how both facilitated diffusion and active transport mean that proteins are found floating in the cell membrane and this also helps to briefly prepare the students for upcoming topic 2 lessons.

This fully-resourced lesson describes the process of DNA replication and explains how this ensures genetic continuity between generations. Both the detailed PowerPoint and accompanying resources have been designed to cover point 1.5.2 of the AQA A-level Biology specification and also explains why it is known as semi-conservative. The main focus of this lesson is the roles of DNA helicase in the breaking the hydrogen bonds between nucleotide bases and DNA polymerase in forming the growing nucleotide strands. Students are also introduced to DNA ligase to enable them to understand how this enzyme functions to join the nucleic acid fragments. Time is taken to explain key details, such as the assembly of strands in the 5’-to-3’ direction, so that the continuous manner in which the leading strand is synthesised can be compared against that of the lagging strand. The students are constantly challenged to make links to previous topics such as DNA structure and hydrolysis reactions through a range of exam questions and answers are displayed so that any misconceptions are quickly addressed. The main task of the lesson asks the students to use the information provided in the lesson to order the sequence of events in DNA replication before discussing how the presence of a conserved strand and a newly built strand in each new DNA molecule shows that it is semi-conservative.

A detailed and engaging lesson presentation (43 slides) and accompanying worksheets that introduces students to the disease, Diabetes (mellitus), and focusses on the similarities and differences between types I and II. The lesson begins by challenging the students mathematically to get the answers 1 and 2 and then to see whether they can link these numbers to a disease. A variety of tasks, which includes competitions and progress checks, are used to get the students to recognise the differences and state which of the types they belong to. This lesson has been designed for GCSE students and can be used with higher level students. However, a lesson more appropriate for A-level Biology students is named “Diabetes Mellitus Type I and II” and is available in my resources

A highly engaging lesson presentation (60 slides) and accompanying worksheets that uses exam questions (with explained answers), quick tasks and competitions to allow students to assess their understanding of the topic of Genes and Health (Topic 2). Students will have fun whilst recognising those areas of the specification which need further attention. Competitions include "Blockbusters" Hotseat" and "james BOND" so that literacy and numeracy skills are tested along with the content knowledge.

An informative lesson presentation (30 slides) that ensures that students know the meaning of the independent, dependent and control variables in an investigation and are able to identify them. Students are challenged to use their definitions to spot the independent and dependent variable from an investigation title. Moving forwards, they are shown how they can use tables and graphs to identify them. The rest of the lesson focuses on the control variables and how these have to be controlled to produce valid results This lesson is suitable for students of all ages studying Science as it is such a key skill