Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics.
By the end of the lesson learners should be able to:
Recall what is meant by mass flow continuity.
Describe factors that can affect volume flow and pressure.
Use the Bernoulli principle to justify how an aeroplane experiences lift.
The resource contains past paper questions and mark scheme answers.
Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.
By the end of the lesson learners should be able to:
Identify 2 devices used to deal with electrical overload.
Describe how fuses and earthing deal with electrical overloads.
Explain the movement of electricity and why earthing works.
By the end of the lesson learners will be able to:
Identify the effect of force.
Describe how to calculate force.
Explain why mass and acceleration affects force.
By the end of the lesson learners will be able to:
Identify the 3 types of radiations.
Describe properties of each type of radiation.
Explain why the atomic and mass numbers change after some radioactive emissions.
By the end of the lesson learners will be able to:
Identify waves from a top view.
Describe what occurs during diffraction.
Explain why a diffraction grating produces light and dark zones.
A comprehensive lesson which teaches students about how IV graphs appear for fixed resistors, filament bulbs and diodes. The lesson also delves into the reasoning behind why these trends arise.
Progress checks are available following each success criteria
Tasks are differentiated to suit the needs of each learner.
Learning objective: Use Ohm’s law to justify the trends seen in IV graphs for a fixed resistor, filament bulb and LED.
By the end of the lesson learners should be able to:
Success criteria:
-Identify generally what happens to current as voltage increases.
-Describe how to calculate resistance from a voltage-current graph.
-Compare how the resistance changes with load in: fixed resistors, filament bulbs and diodes.
Powerpoint contains 22 slides and a collection of past paper questions including the marking scheme.
A comprehensive lesson which teaches students about the universe and its contents. Students will then progress to learn about our solar system and orbiting objects in space.
Progress checks are available following each success criteria
Tasks are differentiated to suit the needs of each learner.
Learning objective: Develop an understanding of what makes up our universe.
By the end of the lesson learners should be able to:
Success criteria:
I can identify components of the universe.
I can describe our solar system.
I can explain why gravity is needed for solar systems to survive.
Powerpoint contains 31 slides.
Originally created for the BTEC Applied Science level 3 qualification Unit 5 - Physics.
By the end of the lesson learners should be able to:
Recall the equations involving work done by movement and work done by pressure expansion.
Describe how the area of cylinder heads affect the movement of fluids in hydraulics.
Use multiple equations to calculate the work, force and distance moved by hydraulic cylinders.
The resource contains past paper questions and mark scheme answers.
Slides were originally created using google slides, opening in microsoft powerpoint might cause slight misalignment - open in google slides to avoid this.
By the end of the lesson learners should be able to:
Identify pivots.
Describe how a moment is made.
Explain why doors have their handle on the furthest point from the pivot.
A revision session containing a mind map (with guidance and without).
A Powerpoint containing a quiz session (10 questions) - excellent for a starter / plenary.
Answers to each section of the mind map within the Powerpoint.
By the end of the lesson learners should be able to:
Identify the make up of atoms.
Describe how cloud chambers are used to detect particles and properties about them.
Explain why particle accelerators are useful for explaining the makeup of matter.
By the end of the lesson learners should be able to:
Identify what is needed for GPS to work.
Describe how a RADAR system detects objects.
Explain why a stellar parallax is used to measure the distance of stars instead of RADAR.
All features work when used with google slides. All features should work with PowerPoint, but might need some rearranging.
By the end of the lesson learners will be able to:
Identify the elements that are radioactive.
Describe what is meant by a radioactive material.
Explain the trend in radioactive decay.
All features work when used with google slides. All features should work with PowerPoint, but might need some rearranging.
By the end of the lesson learners will be able to:
Recall how a radio signal is made.
Describe how electromagnetic waves are used for communication.
Explain the advantages of electromagnetic radiation.
Resource was intended for BTEC Applied Science Unit 1 Physics.
The resource was designed on google slides and should work fine on powerpoint, it might just need some rearranging.
Past paper questions are included with answers from the mark scheme.
By the end of the lesson learners will be able to:
Identify digital and analogue signals.
Describe how digital signals store information.
Compare single mode and multimode fibre.
Resource was intended for BTEC Applied Science Unit 1 Physics.
The resource was designed on google slides and should work fine on powerpoint, it might just need some rearranging.
Past paper questions are included with answers from the mark scheme.
By the end of the lesson learners will be able to:
Identify the critical angle.
Describe the uses of optical fibres.
Explain why endoscopes are able to obtain an image of an object even if the optical fibre inside is curved.
The resource was designed on google slides and should work fine on powerpoint, it might just need some rearranging.
By the end of the lesson learners should be able to:
Define the conservation of momentum.
Describe how to calculate the combined momentum of two objects.
Calculate the velocity of objects after a collision when given the starting velocities and masses.
By the end of the lesson learners will be able to:
State what is meant by an isotope.
Describe how atoms of different elements are different (in terms of numbers of electrons and protons).
Explain why all atoms have no overall charge.
A google slides resource that is ready to be used out of the box.
Slides might need some alterations when opened with powerpoint.
By the end of the lesson learners will be able to:
Recall the equation for work done
Apply the conservation of energy to simple machines
Explain how a lever works