An engaging, practical-based lesson presentation (22 slides), accompanied by a practical worksheet and application questions which together explore how the extension of a spring is related to force according to Hooke’s Law. The lesson begins by introducing the name of the law and looking at the equation which connects the force, extension and spring constant. As spring constant is likely to be a new term to students, time is taken to look at the definition of this key term. Students are given hints throughout the lesson about potential issues to look out for, including the unit of spring constant being N/m when the majority of springs are small enough that their extension will be measured in cm or mm. Moving forwards, students will follow the provided experimental method to carry out the investigation and produce a set of results which can be used to plot the line. The two distinct sections of the line are discussed and the actual words of Hooke’s Law are given and again discussed and considered. The final part of the lesson involves the students being challenged to apply their knowledge of the law to a range of application questions and assessing against the displayed mark scheme. This lesson has been written for GCSE students but can be used with KS3 students who are studying the extension of a spring

An informative lesson presentation (24 slides), accompanied by a set of differentiated question worksheets, which together guide students through calculating energy changes in reactions and then challenges them to apply their new-found knowledge. The lesson begins by asking the students to complete a sentence which details how energy is taken in to break bonds in the reactants and given out when bonds are formed in the products. The bond energy table is then introduced so that students understand how it will be used in questions. Moving forwards, a step by step guide is used to calculate the energy change value for two reactions and students are shown how to interpret the positive or negative result as endothermic or exothermic respectively. The remainder of the lesson asks the students to apply what they have learnt to calculate the energy change for two more reactions. This question worksheet is differentiated two ways so that students who need extra assistance can still access the work. This lesson has been designed for GCSE students

A lesson presentation (44 slides), accompanied by a question worksheet, which together looks at the reactants and products of a neutralisation reaction and challenges students to represent these reactions with equations. The lesson begins with a bit of fun as students are asked to read through a scene from the US comedy show and spot that a neutralisation reaction is hidden under the jokes. Students will use their KS3 knowledge to recall that these reactions involve acids and alkalis and moving forwards they will be introduced to a new term, base. The rest of the lesson focuses on writing word and balanced symbol equations for different neutralisation reactions. A step by step guide is used to demonstrate how to work out the name of the salt as well as writing accurate chemical formulae. Finally, students are challenged to apply their new-found knowledge and complete equations for 4 neutralisation reactions and they can assess against the displayed mark schemes. Progress checks have been written into the lesson at regular intervals so that this self-assessment is constant and any misconceptions are quickly addressed. This lesson has been written for GCSE students but could be used with younger students who are looking to extend their knowledge

An engaging and detailed lesson presentation (53 slides) and associated worksheets that looks at the properties and functions of enzymes and explores how the rate of enzyme-controlled reactions changes with changes in conditions. The lesson begins by using a quick quiz competition to introduce the key terms of active site and substrate. Diagrams accompany the important descriptions so that students can visualise how enzymes are specific to a single substrate and will form enzyme-substrate complexes with only them. Emil Fischer’s lock and key hypothesis is briefly discussed so that the correlation between the hypothesis and key terms can be made. Students are shown how most enzymes or groups of enzymes can be named by remembering two rules and they will be tested on this through a second competition. At this point, a progress check is used to allow the students to assess their understanding and ability to bring the information together for enzyme function. The rest of the lesson looks at how changing the temperature and pH will affect the rate of an enzyme controlled reaction. Students will meet the graph shapes that accompany both of these factors and then are helped with the explanation of the trend which is normally poorly done in exam questions. This lesson has been designed for GCSE students.

An engaging, practical-based lesson presentation (34 slides), accompanied by an assistance sheet, which together look at how the results of displacement reactions can be used to order the metals into the reactivity series. The lesson begins by introducing a displacement reaction and ensuring that students understand the meaning of this term and how it relates to the topic of the lesson. Students will carry out a series of 12 displacement reactions, involving 4 different metals and will then be challenged to interpret the results to place the metals into their allocated positions in the series. Moving forwards, the students are given the results of more reactions, some which occurred and others which didn’t so they can place the remaining metals into the reactivity series. Time is also taken to understand how the position of hydrogen in the series can be used to predict the results of reactions between metals and acids. This lesson has been written for GCSE students but could be used with higher ability KS3 students

A concise lesson presentation (27 slides) that looks at the key details of the sub-atomic particles and briefly explores how the atomic and mass numbers of the Periodic Table can be used to calculate the numbers of these particles in different atoms. The lesson begins with a Mathematical link as students are challenged to convert the size of an atom from standard form into a real number. Moving forwards, students will meet the three sub-atomic particles and be asked to predict which one is positive, neutral and negative in charge. The relative mass of a proton is shown and then students are asked to work out the mass of a neutron and an electron by observing some experimental results with a scales. Finally, the students are shown how to use the atomic number to work out the number of protons (and electrons) in an atom and how to work out the number of neutrons. This lesson has been designed to act as a knowledge recall and top-up as this should have already been learnt at KS3.

This lesson has been written for GCSE students with a focus on the key processes and reactions involved in the carbon cycle as well as discussions centering around how the levels of carbon dioxide alter during the day and over longer periods of time. A number of quick competitions have been written into the lesson to introduce key terms or to challenge students to recognise key reactions that they will have already met in their Biology lessons. As each stage of the cycle is encountered, time is taken to discuss the potential impacts and the organisms involved. The remainder of the lesson looks at carbon dioxide levels. Initially, students are challenged to explain why the levels would change during the course of a day. Students are already likely to be aware that carbon dioxide levels have increased over the last 100/200 years but not necessarily how much. Time is taken to focus on the mathematical skills which could be challenged on this topic and the percentage change equation is shown to the students so they can quantify their answers. As a class, deforestation and its effect on the carbon cycle and atmospheric levels are discussed so that students can mirror this in a homework task about combustion of fossil fuels. Progress checks are written into the lesson at regular intervals so that students are constantly assessing their understanding.

A fully-resourced lesson which explores the photosynthesis reaction, focusing on where it takes place and the reactants and products of this chemical reaction. This lesson includes an engaging and detailed lesson presentation (45 slides), a summary task and a crossword which is used throughout the lesson. Students will already have a fair knowledge of this topic from KS3 so this lesson has been written to take that knowledge and push it forward. Key details are added throughout the lesson such as how the reactants enter the plant by osmosis and diffusion and also how water travels from the roots to the leaves in the xylem vessel. An engaging competition runs during the lesson called “LIGHT up the crossword” and this enables the key terms of the topic to be stored in one place. There are two main written tasks during the lesson which challenge the students to summarise the reaction using all that they have learnt and also to state the different uses of glucose. The lesson has been linked to related topics with understanding checks written in at regular intervals so this knowledge can be assessed. This lesson has been written for GCSE students but could be used with higher ability KS3 students who want to learn more than they currently know

An engaging lesson which focuses on the key terms which are involved in the ecology topic of food chains and food webs. Although this lesson is primarily designed for GCSE students, the content is suitable with KS3 students who are looking at the ecological relationships between organisms. The lesson begins by ensuring that students are confident in the construction of a food chain and that any common mistakes such as the arrows pointing in the wrong direction are eliminated. As with the other ecology lessons that I have designed, “ecology bingo” runs throughout the lesson to engage the students but also to challenge their recognition of key terms from definitions. Key terms such as producers and consumers are revisited in this lesson. The students will recall the names for the three types of consumers, based on their diets, and will make the link between the positions of producers, herbivores and carnivores in food chains. The remainder of the lesson focuses on the construction of a food web and describing changes in the numbers of organisms when there is a change to one of the other populations. Progress checks have been written into the lesson at regular intervals so students can constantly assess their understanding.

An engaging lesson presentation which looks at the organs of the human endocrine system, the hormones they release and briefly considers some of their functions. This lesson has been designed for GCSE students but could be used with younger students at KS3 who are studying the different organ systems in the human body. The lesson begins by looking at the meaning of endo and crine so that students recognise that this is also known as the hormonal system and the hormones are always released directly into the blood. A number of quick competitions have been written into the lesson to maintain engagement and provide opportunities to check understanding in an alternative way to simple questions. This first of these games is called “Any sign of the ENDOCRINE”, where students are challenged to pick the endocrine gland out of a selection of three and then come to board to point to where it would be found on a body outline. The students have to label the diagram on the worksheet included in this lesson and then allocate hormones to 5 of the 6 glands. Time is taken to focus on the pituitary gland and three of the hormones that it releases in FSH, LH and TSH because these relate to the menstrual cycle and the thyroid gland. The final part of the lesson involves students being shown an acronym, HBGT, that they can use in longer answers to ensure that they mention the hormone, blood, the gland that releases the hormone and the target tissue.

A fully-resourced lesson that uses a range of tasks, understanding checks and quick competitions to guide students through calculating the relative formula mass for substances with a range of chemical formulae. The relative formula mass is required in a lot of calculations, such as those that involve moles, so it is an important skill to get right. Worked examples are used throughout the lesson to visualise the metho for the students. Initially, students will learn how to calculate the mass from simple formulae before helpful hints are provided for harder formulae such as those that contain a bracket. Students are given the chance to apply their knowledge by proving that mass is conserved in a reaction. This lesson has been written for GCSE students but could be used with higher ability KS3 students in lessons that are looking to push knowledge forward

This lesson has been designed to enable students to recognise the key stages in the formation of the early atmosphere and to also show how today’s atmosphere was formed. The lesson has been primarily designed for GCSE students but is suitable for higher ability younger students who perhaps are studying the Earth and its formation. The lesson begins by checking that the students know the percentages of the different gases found in the modern day atmosphere. Some time is taken to check on their mathematical skills by challenging them to produce a pie chart to represent these different percentages. Students are then asked to predict how they think the percentage of oxygen, carbon dioxide and water vapour would have differed from now to the early atmosphere. The key steps in the formation are then introduced and critical points discussed. Students will learn about the volcanic activity, formation of the oceans and photosynthesis as crucial points in the change to the percentages of those three gases. A number of progress checks are written into the lesson, which check knowledge from this lesson and related topics such as the reaction of acids and gases.

This engaging lesson looks at the role of haemoglobin in transporting oxygen and carbon dioxide and compares the dissociation curves for foetal and adult haemoglobin. The detailed PowerPoint has been designed to cover points 3.1.2 (i & j) of the OCR A-level Biology A specification and includes references to the role of carbonic anhydrase and the formation of haemoglobinic acid and carbaminohaemoglobin. The lesson begins with a version of the quiz show Pointless to introduce haemotology as the study of the blood conditions. Students are told that haemoglobin has a quaternary structure and are challenged to use their prior knowledge of biological molecules to determine what this means for the protein. They will learn that each of the 4 polypeptide chains contains a haem group with an iron ion attached and that it is this group which has a high affinity for oxygen. Time is taken to discuss how this protein must be able to load (and unload) oxygen as well as transport the molecules to the respiring tissues. Students will plot the oxyhaemoglobin dissociation curve and the S-shaped curve is used to encourage discussions about the ease with which haemoglobin loads each molecule. At this point, foetal haemoglobin and its differing affinity of oxygen is introduced and students are challenged to predict whether this affinity will be higher or lower than adult haemoglobin and to represent this on their dissociation curve. The remainder of the lesson looks at the different ways that carbon dioxide is transported around the body that involve haemoglobin. Time is taken to look at the dissociation of carbonic acid into hydrogen ions so that students can understand how this will affect the affinity of haemoglobin for oxygen in an upcoming lesson on the Bohr effect. It is estimated that it will take in excess of 2 hours of A-level teaching time to cover the detail of these two specification points as covered in this lesson

This lesson focuses on the nature of the genetic code in terms of being near universal, non-overlapping and degenerate and specifically focuses on this latter term to explain how a mutation may not result in a change to the sequence of amino acids. The PowerPoint has been designed to cover point 2.1.3 (f) of the OCR A-level Biology A specification and there are clear links to gene mutations which students will meet in module 6. The lesson begins by introducing the terms near universal and non-overlapping in addition to degenerate. A quick quiz competition is used to generate the number 20 so that the students can learn that there are 20 proteinogenic amino acids in the genetic code. This leads into a challenge, where they have to use their prior knowledge of DNA to calculate the number of different DNA triplets (64) and the mismatch in number is then discussed and related back to the lesson topic. Moving forwards, base substitutions and base deletions are briefly introduced so that they can see how although one substitution can change the primary structure, another will change the codon but not the encoded amino acid. The lesson concludes with a brief look at the non-overlapping nature of the code so that the impact of a base deletion (or insertion) can be understood when covered in greater detail in module 6.