This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic 6 (Immunity, infection and forensics) of the Pearson Edexcel A-level Biology A specification. The sub-topics and specification points that are tested within the lesson include: Know how DNA profiling is used for identification and determining genetic relationships Know how DNA can be amplified using the PCR Know the structure of a virus Understand how HIV infects human cells, causing a sequence of symptoms that may result in death Understand the non-specific responses of the body to infection Understand the roles of antigens and antibodies in the body’s immune response Understand the differences between the roles of B cells and T cells Understand how one gene can give rise to more than one protein through post-transcriptional changes Understand the difference between bacteriostatic and bactericidal antibiotics Students will be engaged through the numerous quiz rounds such as “FROM NUMBERS 2 LETTERS” and “Make sure you are very SPECIFIC” whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual A-level terminal exams

This lesson describes how to calculate the mean and standard deviation of collected data and describes how these values may be interpreted. The PowerPoint and accompanying worksheets are part of the second lesson in a series of 2 lessons which have been designed to cover point 4.7 (Investigating diversity) of the AQA A-level Biology specification. It is important to note that the students will not be required to calculate the standard deviation in written papers but that they do need to understand how these values are obtained and what they could indicate. The lesson begins with an introduction of the standard deviation as a measure of the spread around the mean. The students will learn that interpreting the data is a critical requirement of this A-level course and this initial portion of the lesson considers how the spread of the data around the mean can lead to differing suggestions about reliability. A step by step guide walks the students through each stage of the calculation of the standard deviation, which includes the calculation of the mean, and they will complete a worked example with the class. A quick quiz round introduces the values of 68 and 95 in a fun way to encourage the students to remember that if the focus of the data shows a normal distribution, 68% of the observations are within +/- one standard deviation and 95% are within 2 standard deviations. The final task challenges the students to apply their knowledge to data about the birth weights of humans at a UK hospital on one day in 2020.

This is a fully-resourced lesson about group 7 of the Periodic Table, the halogens, which includes a lesson presentation (34 slides) and a differentiated worksheet. The lesson begins by challenging students to recognise and explain why the electronic structure of group 1 and group 7 means that they react together easily. As the lesson progresses, students will learn more and more properties about the halogens and key terms such as diatomic are used throughout so that students become accustomed to these. Moving forwards, students will carry out a series of displacement reactions so that they can recognise that the reactivity of these elements decreases as they go down the group. Students are challeged to explain this with reference to electron configuration and a differentiated worksheet will help those who need assistance to access this work. This lesson has been designed for GCSE students (14 - 16 year olds in the UK) but is suitable for younger students who might be carrying out a project on the Periodic Table

This fully-resourced lesson explores the relationship between the structure of arteries, arterioles and veins and their respective functions. The engaging and detailed PowerPoint and accompanying resources have been designed to cover the 6th part of point 3.4.1 of the AQA A-level Biology specification which states that students should be able to describe the structure of these blood vessels in relation to their function. This lesson has been written to build on any prior knowledge from GCSE or earlier in this topic to enable students to fully understand why a particular type of blood vessel has particular features. Students will be able to make the connection between the narrow lumen and elastic tissue in the walls of arteries and the need to maintain the high pressure of the blood. A quick version of the GUESS WHO game is used to introduce smooth muscle and collagen in the tunica media and externa and again the reason for their presence is explored and explained. Moving forwards, the importance of the arterioles as a transition between the artery and capillary is discussed and students will see how the smooth muscle in the walls of this blood vessel allows for the redistribution of blood during exercise. The final part of the lesson considers the structure of the veins and students are challenged to explain how the differences to those observed in arteries is due to the lower blood pressure found in these vessels. It is estimated that it will take about 2 hours of allocated A-level Biology teaching time to cover the detail included in this lesson

A fully-resourced lesson which prepares students for the range of mathematical-based questions that they could encounter on the two AQA GCSE Chemistry papers. The lesson contains a wide range of activities which include exam-style questions with markschemes embedded within the PowerPoint to enable the students to assess their current understanding. There are also 8 quiz competition rounds interspersed throughout the lesson to maintain engagement and motivation. The mathematical skills covered in this lesson include: Calculating the number of sub-atomic particles in atoms and ions Writing chemical formulae for ionic compounds Identifying isotopes Using Avogadro’s constant to calculate the number of particles Calculating the relative formula mass Calculating amount in moles using the mass and the relative formula mass Balancing chemical symbol equations Calculating reacting masses Gas calculations using molar volume Calculating the concentration of an unknown solution Calculating the atom economy and percentage yield Calculating energy changes in reactions Temperature and pressure and the position of equilibrium Most of the resources have been differentiated two ways to allow students of differing abilities to access the work whilst still being challenged. In addition, step by step guides are used to demonstrate how to carry out some of the more difficult calculations such as the harder mole calculations and calculating masses in reactions

This lesson explains the law of conservation of mass and applies this law to a closed system and a non-enclosed system. The PowerPoint and accompanying resources have been designed to cover point 1.48 of the Edexcel GCSE Chemistry specification and also covers that point in the Chemistry section of the Combined Science course. The lesson begins by introducing the law of the conservation of mass. Students will learn that they can expect questions which challenge them to prove that mass is conserved through the use of the relative formula mass. Therefore, the next section of the lesson focuses on the skills associated with this calculation and looks at more different formulae such as those with brackets. Students are given an opportunity to check their skills before trying to prove mass is conserved in three chemical reactions. All questions have displayed mark schemes so that students can assess their understanding. The rest of the lesson looks at instances of when the mass of the reactants does not equal the mass of the products. A practical method for the decomposition of copper carbonate is provided if the teacher wants to use it, so that students can collect results which show this difference in mass. Discussions are encouraged in order to get students to offer explanations as to why the mass of the products is lower. Once the gas has been identified, students are further challenged to consider apparatus that could be used to collect and record the results to again prove conservation

This fully-resourced lesson explains the meaning of gross and net primary production and net production and describes how they are calculated. The PowerPoint and accompanying resources are part of the second lesson in a series of 3 lessons which have been designed to cover the detail in point 5.3 of the AQA A-level Biology specification. Due to the fact that the productivity of plants is dependent on photosynthesis, a series of exam-style questions have been written into the lesson which challenge the students to explain how the structure of the leaf as well as the light-dependent and light-independent reactions are linked to GPP. All of the exam questions have displayed mark schemes which are included in the PowerPoint to allow students to immediately assess their understanding. A number of quick quiz competitions as well as guided discussion points are used to introduce the formulae to calculate NPP and N and to recognise the meaning of the components. Once again, this is immediately followed by the opportunity to apply their understanding to selected questions. As well as linking to photosynthesis from earlier in topic 5, this lesson has been specifically planned to challenge students on their understanding of ecosystem terminology from the previous lesson as well as preparing them for the next lesson on the efficiency of energy transfer

This is a highly detailed, engaging and fully-resourced lesson that covers the detail of the 2nd part of specification point 5.1.2 (b) of the OCR A-level Biology A specification which states that students should be able to demonstrate and apply an understanding of the functions of the mammalian liver. The liver performs a large number of metabolic functions and the majority of them are covered within this lesson. However, the lesson focuses on the following three roles: The formation of urea by deamination and the ornithine cycle The storage of glycogen The detoxification of alcohol As well as covering the detail of the current topic, numerous opportunities are taken to make links to other topics and to check on the students prior knowledge. Previous knowledge check questions on biological molecules, coenzymes and the structure of the liver are found dispersed within the understanding checks and quick quiz competitions are used to introduce key terms and values in a fun and a memorable way. This lesson has been designed for students on the OCR A-level Biology A course and ties in well with the other uploaded lessons on module 5.1.2 about the structure and function of the kidney

This fully-resourced lesson has been designed to cover the higher tier content of specification points 7.13 & 7.14 (Control of blood glucose concentration) as found in topic 7 of the Edexcel GCSE Biology & Combined Science specifications. This resource contains an engaging PowerPoint and accompanying worksheets, some of which have been differentiated so that students of different abilities can access the work. The resource is filled with a wide range of activities, each of which has been designed to engage and motivate the students whilst ensuring that the key Biological content is covered in detail. The students will learn how blood glucose concentration is controlled by insulin and glucagon secretion and some time is taken to look at diabetes type I and II to make the link. Understanding checks are included throughout so that the students can assess their grasp of the content. In addition, previous knowledge checks make links to content from earlier topics such as the endocrine system and literacy checks ensure that the students can spell and recognise the key words, which is extremely important considering how many terms begin with the letter g in this homeostatic control system. As stated at the top, this lesson has been designed for GCSE-aged students who are studying the Edexcel GCSE Biology or Combined Science courses, but it can be used with A-level students who need to go back over the key points before looking at the homeostatic control in more detail

This resource contains a detailed and engaging PowerPoint and accompanying worksheets, all of which have been designed to cover point 2.14 of the Edexcel GCSE Biology or Combined Science specification. This specification point states that students should be able to explain the structure and function of a reflex arc including sensory, relay and motor neurones. The lesson builds on the knowledge from point 2.13 where students learnt about the structures in the nervous system. The lesson begins by challenging the students to come up with the word reflex having been presented with 5 other synonyms of the word automatic. This leads into a section of discovery and discussion where students are encouraged to consider how a reflex arc can be automatic and rapid despite the fact that the impulse is conducted into the CNS like any other reaction. Students will be introduced to the relay neurone and will learn how this provides a communication between the sensory neurone and the motor neurone and therefore means that these arcs do not involve processing by the brain. Moving forwards, the main task of the lesson challenges the students to write a detailed description of a reflex arc. Assistance is given on the critical section which involves the relay neurone in the spinal cord before they have to use their knowledge of nervous reactions to write a paragraph before and after to complete the description. As a final task, students will have to compare the structure and functions of the three neurones. This lesson contains a wide range of activities which include quiz competitions to introduce key terms and values in a fun and memorable way as well as understanding and prior knowledge checks so that students can assess their grasp of the critical content. It has been written for students studying the Edexcel GCSE Biology or Combined Science courses but is also suitable for younger students looking at the nervous system or A-level students who need to recall the key details and structures

This lesson describes the meaning of the atomic and mass number and explains how to calculate the number of protons, neutrons and electrons. The PowerPoint has been designed to cover the detail of points 1.4, 1.7, 1.8 and 1.10 of the Edexcel GCSE Chemistry and Combined Science specifications. The lesson begins by challenging the students to put the chemical symbols for astatine, oxygen, iodine and carbon together to form the word atomic. Time is taken to explain the meaning of the atomic number and to emphasise how the number of protons in the nucleus is unique to atoms of that element. The students will learn that as the number of electrons is always the same as the number of protons in an atom, the atomic number can be used to calculate the numbers of both of these particles. Moving forwards, the mass number is considered and having been given the number of neutrons in a lithium atom, the students are challenged to articulate how the mass number and atomic number were used in this calculation. A series of worked examples are done as a class before the students are given the opportunity to challenge their understanding.

This fully-resourced lesson has been designed to cover the content found in specification point 5.1 (Homeostasis) of topic 5 of the AQA GCSE Biology & Combined Science specifications. This resource contains an engaging and detailed PowerPoint (45 slides) and accompanying worksheets The lesson begins by challenging the student’s literacy skills as they are asked to recognise the key term, optimum, from 6 of its’ synonyms. Moving forwards, a range of quiz competitions are used to introduce the term homeostasis and to provide a definition for this key process. Students are given a newspaper article about water and blood glucose so they can recognise 2 conditions which are controlled in the human body. The next part of the lesson looks at the importance of maintaining the levels of water and glucose by considering the medical problems that could arise if they move away from the optimum levels. Students will learn that body temperature is also controlled and links are made to earlier knowledge as they have to explain why an increase in temperature above the set point would be an issue because of the denaturation of enzymes. The rest of the lesson looks at the three parts that are included in all control systems before a final quiz round introduces the receptors, coordination centre and effectors in the control of body temperature. As stated at the top, this lesson has been designed for GCSE-aged students who are studying the AQA GCSE Biology or Combined Science course, but it can be used with A-level students who need to go back over the key points before looking at the process in more detail

This lesson describes the relationship between the structure and function of the polysaccharides, starch and cellulose. The detailed PowerPoint and accompanying resource have been designed to cover point 4.3 of the Edexcel International A-level Biology specification and includes a focus on the role of the hydrogen bonds between the beta-glucose molecules in the formation of cellulose microfibrils. The structure of amylose and amylopectin was described during a lesson in topic 1, so the start of this lesson challenges the students on their recall of these details. They have to complete a comparison table for these two polysaccharides by identifying the monomer and type of glycosidic bonds that are found in each of the structures. Time is taken to explain how the greater resistance to digestion of amylose means that this carbohydrate is important for plant energy storage whereas the multiple chain ends in the branched amylopectin means that this polysaccharide can be hydrolysed quickly when energy is needed. The rest of the lesson describes the structure of cellulose and focuses on the link between the structure and the need for this polysaccharide to support the plant cell as well as the whole plant. Students will see how every other beta glucose monomer is rotated by 180 degrees and will learn that hydrogen bonds form between these molecules on the same chain as well as between adjacent chains in a cellulose microfibril. The lesson concludes with a quick quiz competition where the students have to compete to open a safe using a combination made up of key values associated with glycogen, starch and cellulose.

This fully-resourced lesson covers the content of specification points 15.1 (g and h) of the CIE international A-level Biology specification that states that students should be able to describe the structure of a cholinergic synapse and outline their roles in the nervous system. The majority of the lesson uses the cholinergic synapse as the example but other neurotransmitters are considered at the end of the lesson to provide the students with a wider view of this topic. The lesson begins by using a version of the WALL (as shown in the cover image) which asks the students to group 12 words into three groups of 4. Not only will this challenge their prior knowledge from topics earlier in this module but it will also lead to the discovery of four of the structures that are found in a synapse. Moving forwards, students are introduced to acetylcholine as the neurotransmitter involved at cholinergic synapses and they will start to add labels to the structures found in the pre-synaptic bulb. Time is taken to focus on certain structures such as the voltage gated channels as these types of channel were met previously when looking at the depolarisation of a neurone. There is plenty of challenge and discovery as students are pushed to explain why organelles like mitochondria would be found in large numbers in the bulb. With this process being a cascade of events, a bullet point format is used to ensure that the key content is taken in by the students and again key points like exocytosis and the action of acetylcholinesterase are discussed further. The final part of the lesson challenges the application aspect of the subject as students are introduced to unfamiliar situations in terms of synapses with new drugs like MDMA and are asked to work out and explain how these affect the nervous transmission. Understanding checks and prior knowledge checks are included throughout the lesson so that students can not only assess their progress against the current topic but also see whether they can make links to earlier topics. This lesson has been designed for students studying the CIE International A-level Biology course and ties in with the other uploaded lessons on the topics of 15.1 (Control and coordination in mammals)

This is a detailed and engaging REVISION lesson which is fully-resourced and uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 7 (Radioactivity and particles) of the Pearson Edexcel IGCSE Physics 9-1 specification (4PH1) for first assessment in June 2019. The specification points that are covered in this revision lesson include: Use the following units: becquerel (Bq), centimetre (cm), hour (h), minute (min) and second (s) Describe the structure of an atom in terms of protons, neutrons and electrons and use symbols to represent isotopes Know the terms atomic (proton) number, mass (nucleon) number and isotope Know that alpha (α) particles, beta (β−) particles, and gamma (γ) rays are ionising radiations emitted from unstable nuclei in a random process Describe the nature of alpha (α) particles, beta (β−) particles, and gamma (γ) rays, and recall that they may be distinguished in terms of penetrating power and ability to ionise Describe the effects on the atomic and mass numbers of a nucleus of the emission of each types of radiation Understand how to balance nuclear equations in terms of mass and charge Know that the activity of a radioactive source decreases over a period of time and is measured in becquerels Know the definition of the term half-life and understand that it is different for different radioactive isotopes Use the concept of the half-life to carry out simple calculations on activity Know that nuclear reactions, including fission, fusion and radioactive decay, can be a source of energy Understand how a nucleus of U-235 can be split (the process of fission) by collision with a neutron, and that this process releases energy as kinetic energy of the fission products Know that the fission of U-235 produces two radioactive daughter nuclei and a small number of neutrons Describe how a chain reaction can be set up if the neutrons produced by one fission strike other U-235 nuclei Explain the difference between nuclear fusion and nuclear fission Describe nuclear fusion as the creation of larger nuclei resulting in a loss of mass from smaller nuclei, accompanied by a release of energy Know that fusion is the energy source for stars The students will thoroughly enjoy the range of activities, which include quiz competitions such as “It’s as easy as ABG” where they have to compete to be the 1st to form a word by using clues about the different types of radiation whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual International GCSE exams

An engaging lesson presentation (79 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within Topic 9 (Ecosystems and material cycles) of the EDEXCEL GCSE Biology specification The topics that are tested within the lesson include: Levels of organisation Communities Interdependence in a community Determining the number of organisms in a given area Biomass and the transfer of energy between trophic levels Recycling materials Deforestation Global warming Decomposition and the rate of decay Students will be engaged through the numerous activities including quiz rounds like “Number CRAZY" whilst crucially being able to recognise those areas which need further attention

This fully-resourced lesson describes the ultrastructure of eukaryotic cells and the role of the RER and Golgi apparatus in protein transport. The engaging and detailed PowerPoint and accompanying exam-question worksheets (which are all differentiated) have been primarily designed to cover point 3.2 of the Pearson Edexcel A-level Biology A (Salters Nuffield) specification but also covers 3.1 which states that students should know that living organisms are made of cells, sharing some common features As cells are the building blocks of living organisms, it makes sense that they would be heavily involved in all of the 8 topics in the Edexcel course and intricate planning has ensured that these links to previously covered topics as well as upcoming ones are made throughout the lesson. A wide range of activities, that include exam-style questions, class discussion points and quick quiz competitions, will maintain motivation and engagement whilst covering the finer details of the following structures: nucleus nucleolus centrioles ribosomes rough endoplasmic reticulum Golgi apparatus lysosomes smooth endoplasmic reticulum mitochondria cell surface membrane As mentioned above, all of the worksheets have been differentiated to support students of differing abilities whilst maintaining challenge Due to the detail that is included in this lesson, it is estimated that it will take in excess of 3 hours of allocated A-level teaching time to go through all of the tasks

This is an engaging and fully-resourced revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Genetics) of the Edexcel GCSE Biology 9-1 specification. The specification points that are covered in this revision lesson include: Explain some of the advantages and disadvantages of asexual reproduction, including the lack of need to find a mate, a rapid reproductive cycle, but no variation in the population Explain some of the advantages and disadvantages of sexual reproduction, including variation in the population, but the requirement to find a mate Explain the role of meiotic cell division, including the production of four daughter cells, each with half the number of chromosomes, and that this results in the formation of genetically different haploid gametes Describe the structure of DNA Describe the genome as the entire DNA of an organism and a gene as a section of a DNA molecule that codes for a specific protein Explain how the order of bases in a section of DNA decides the order of amino acids in the protein and that these fold to produce specifically shaped proteins such as enzymes Describe the stages of protein synthesis, including transcription and translation Describe how genetic variants in the coding DNA of a gene can affect phenotype by altering the sequence of amino acids and therefore the activity of the protein produced Explain why there are differences in the inherited characteristics as a result of alleles Explain the terms: chromosome, gene, allele, dominant, recessive, homozygous, heterozygous, genotype, phenotype, gamete and zygote Explain monohybrid inheritance using genetic diagrams, Punnett squares and family pedigrees Describe how the sex of offspring is determined at fertilisation, using genetic diagrams Calculate and analyse outcomes (using probabilities, ratios and percentages) from monohybrid crosses and pedigree analysis for dominant and recessive traits Explain how sex-linked genetic disorders are inherited State that most genetic mutations have no effect on the phenotype The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Is this SYNTHESISED correctly” where they have to recognise whether a passage on protein synthesis is 100% correct or contains errors whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams.

An engaging lesson presentation (72 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit B6 of the AQA GCSE Biology specification. The topics that are tested within the lesson include: Sexual and asexual reproduction DNA structure Genetic inheritance and disorders Sex determination Variation Genetic engineering Resistant bacteria Classification of living organisms Students will be engaged through the numerous activities including quiz rounds like "From Numbers 2 LETTERS" and "This shouldn't be too TAXing" whilst crucially being able to recognise those areas which need further attention

This fully-resourced lesson explains how a combination of hydrostatic pressure and oncotic pressure results in the formation of tissue fluid from plasma. The detailed PowerPoint and accompanying resources have been designed to cover point 3.1.2 (d) of the OCR A-level Biology A specification and includes a section on the differences between blood, tissue fluid and lymph The lesson begins with an introduction to the arteriole and venule end of a capillary as these will need to be considered as separate entities when describing the formation of tissue fluid. A quick quiz competition introduces a value for the hydrostatic pressure at the arteriole end and students are challenged to first predict some parts of the blood will move out of the capillary as a result of the push from the hydrostatic pressure and this allows oncotic pressure to be initially explored. The main part of the lesson uses a step by step guide to describe how the net movement is outwards at the arteriole end before students will use this guidance to describe what happens at the venule end. In the concluding part of the lesson, students will come to recognise oedema as a condition where tissue fluid accumulates and they again are challenged to explain how this occurs before they finally learn how the fluid is returned to the circulatory system as lymph This lesson has been written to tie in with the other uploaded lessons from module 3.1.2 (Transport in animals)